22 Ft Sailboat Trailers Boats for sale

1-2 of 2

Sort By

1975 Catalina 22 Pop Top Sailboat and Trailer - Project

1975 Catalina 22 Pop Top Sailboat and Trailer - Project

$859

Martinsville, Indiana

Year 1975

Make Catalina

Model 22

Category Daysailer Sailboats

Length 22.0

Posted Over 1 Month

1975 Catalina 22 Pop Top Project Sailboat and Trailer The Catalina 22 is a popular sailboat produced by Catalina Yachts. Its hull measures 21 foot 6 inches (6.55 m), which is rounded up to 22 feet (6.7 m) for use in the model's name. First produced in 1968, it is one of the longest continuously produced sailboats in the world...Over 15000! Parts, videos and know-how are abound on the net 2005 last time previous owner had boat in water. I have never had boat in the water or was able to work on her. 2005 was the last time I was inside the cabin before preparing this listing for ebay. She has been closed up for ten years and is dirty in and out. I sprayed Windex in a few areas inside and dirt just wiped off with no scrubbing. Water, at one time, intruded around the forward hatch. Has complete set of interior cushions in gold plaid pattern. Most are in surprising good condition. NO SMELLS. One has a 1.5x1.5 inch hole in fabric that isn't seen when in place. 1 or 2 have an area of cracking vinyl. In all the noted exceptions, I don't think they would be seen or stop you from sailing PREVIOUS OWNER'S DESCRIPTION: '75 Catalina 22 pop top w/trailer • fair condition - Project boat • Swing Keel • Pop top • Sail Inventory: 2 mains, Jib (Marked San Juan works w/Cat 22s) and 150 Furling I think all are usable • Scupper upgrade in transom • Ablative paint on hull and keel • Never in salt water • Needs good cleaning • I know of no problems with the swing keel • No known leaks around keel pin • Comes with 2 Rudders. Usable but not perfect • Port side blemish in the gel coat • One pop top support needs to be re-bedded • Front hatch needs the frame reinstalled and sealed • Soft spot forward of hatch • Crack in cabin threshold but does not affect anything much • Cracks and crazing in the deck gelcoat that need filling • One stanchion base needs to be re-bedded • Small dent/crack in mast near stays, like pinched on one side at the spreaders. When raising the mast, one of the stays was caught and pulled the spreader forward. See photo. A pontoon boat repair guy told me that a braze could patch for about $25 • Needs halyards but I would get all new running rigging • Replace Hatch Boards or just cut a Plywood Hatch • Standing rigging, I am no judge but it worked when last used and it has been out of the elements since. • The forestay also has a quick-release lever purchased from Catalina Direct, along with quick-release pins for quicker and easier mast- raising and lowering. Those parts are, of course, stainless steel. • Will also include a sliding galley out of a 1984 Cat 22. It slides under the cockpit starboard seating when not in use. It has a faucet, sink, water fresh water holding tank, a drawer and a place for a small portable propane stove. I was going to sell it separately on ebay. They normally go from 150-200. TRAILER • Trailer in good shape, but could use some paint• Has 10 ft extension• Has surge brake system used for two trips since it was installed• Has Buddy Bearings• New load range 'C' tires were put on in Spring of 2010. 63 Miles total mileage as boat was towed from one of our rental homes to our house in Martinsville. No cracks or aging seen.• Extra duty bunks BTW: Good used trailers for sailboats are hard to come by. Have clear titles for boat and trailer. I have described everything I know about her to the best of my ability but I am no sailor. Somethings may be better and others may be worse. She is a project boat and sold as is. This is for local Pickup in Martinsville, Indiana (Just south of Indianapolis) An immediate non-refundable PayPal deposit of $200 is required upon purchase. Balance due in CASH when picked up. No checks or money orders of any kind. Pickup within 7 business days of end of listing. This is not an auction. Will be happy to answer questions Thanks for looking and your interest

1975 Catalina 22 Pop Top Project Sailboat and Trailer

1975 Catalina 22 Pop Top Project Sailboat and Trailer

$1,099

Martinsville, Indiana

Year 1975

Make Catalina

Model 22

Category Daysailer Sailboats

Length 22.0

Posted Over 1 Month

1975 Catalina 22 Pop Top Project Sailboat and Trailer The Catalina 22 is a popular sailboat produced by Catalina Yachts. Its hull measures 21 foot 6 inches (6.55 m), which is rounded up to 22 feet (6.7 m) for use in the model's name. First produced in 1968, it is one of the longest continuously produced sailboats in the world...Over 15000! Parts, videos and know-how are abound on the net 2006 last time previous owner had boat in water. I have never had boat in the water or was able to work on her. Selling because soon after buying her, a heart problem took the wind out of my sails. Thought I would sooner or later, but unfortunately I will never be able to sail her. The following is description of previous owner: '75 Catalina 22 pop top w/trailer • fair condition - Project boat • Does not include motor (One available for a separate purchase) • Swing Keel • Pop top • Has sails, usable • Scupper upgrade in transom • Ablative paint on hull and keel • Complete set of interior cushions in gold plaid pattern are in decent condition • Never in salt water • Needs good cleaning • I know of no problems with the swing keel • No known leaks around keel pin • Rudder is good, but not perfect • Port side blemish in the gel coat • One pop top support needs to be re-bedded • Front hatch needs the frame reinstalled and sealed • Small crack in cabin threshold but does not affect anything much • Some cracks and crazing in the deck gelcoat that need filling • One stanchion base needs to be re-bedded • Small dent/crack in mast near stays, like pinched on one side at the spreaders. When raising the mast, one of the stays was caught and pulled the spreader forward. It pushed into the mast, and the mast has a small crack in it of approx. one inch. A aluminum boat repair guy told me that a weld could patch for $25 • Needs halyards but I would get all new running rigging • Replace Hatch Boards or Just cut a Plywood Hatch • The forestay also has a quick-release lever purchased from Catalina Direct, along with quick-release pins for quicker and easier mast- raising and lowering. Those parts are, of course, stainless steel. TRAILER • Trailer in good shape, but could use some paint• Has 10 ft extension• Has surge brake system used for two trips since it was installed• Has Buddy Bearings• Good tread on tires• Extra duty bunks BTW: Good used trailers for sailboats are hard to come by. Have titles for boat and trailer She is a project boat and is sold as is. I will cannot entertain low balling, consider trades, or Ebayers with negative feedback. This is for local Pickup in Martinsville, Indiana, just south of Indianapolis. An immediate non-refundable PayPal deposit of $200 is required upon purchase. Balance due is to be paid within 7 business days in cash only. No checks or money orders of any kind. You may pay balance via PayPal prior to picking up the boat. This is not an auction. Will be happy to answer questions Thanks for looking