Aluminum Hull Boats for sale

1-15 of 15,413

Sort By

62' Aluminum Yacht Hull For Sale, Unused, 62' x 18', $250,000 Invested

62' Aluminum Yacht Hull For Sale, Unused, 62' x 18', $250,000 Invested

$50,000

Sandusky, Ohio

Year 2015

Make Aluminum Hull

Model -

Category Sport Fishing Boats

Length 62.0

Posted Over 1 Month

Specifications - 62' Yacht Hull For Sale62' Yacht Hull For Sale /* */ --> --> --> 62' Yacht Hull For Sale Contact Gallery Specifications Specifications 62' Yacht Hull For Sale Length: ~ 62' 6? Beam: ~ 17' 9? Height: ~ 12' 4? Weight: We’ve been told the yacht hull weighs ~ 20,000 to 22,000 pounds, however, we cannot guarantee the weight. Plate thickness is approximately 3/16” side, ¼” bottom, 5/16” chine. Frames are L 4” x 3” x 5/16” on 17-3/4” centers The horizontal, transverse H-beams are 4” x 4” x (¼” or 5/16”; not sure which) This yacht hull has been worked on over the years. It has never been put in the water. All new materials have been used in construction. While construction is incomplete, it can be completed and sold as new. Over $250,000 invested in this hull. Hull located in Sandusky, Ohio 44870 Marine Grade Aluminum 5083/5086 H116 Built using ABS High Speed Aluminum Craft Standards Would make an Excellent Sportsfisherman, Motor Yacht, or Patrol Boat. Contact: Call Bill at 419-625-0123 Copyright © 2015 62' Yacht Hull For Sale /* */ Gallery - 62' Yacht Hull For Sale62' Yacht Hull For Sale /* */ --> --> --> 62' Yacht Hull For Sale Contact Gallery Specifications Gallery - only the aluminum hull is for sale; the completed yacht pictures are for illustrative purposes only Imagine the possibilities. This yacht was built with a similar hull. Imagine the possibilities. This yacht was built with a similar hull. ? Aluminum Yacht Hull For Sale By Owner in Ohio – Pic 006 – Call Bill at 419-625-0123 Specifications ? Contact: Call Bill at 419-625-0123 Copyright © 2015 62' Yacht Hull For Sale

10ft Aluminum Hull Outboard Evinrude Motor Fishing Boat

10ft Aluminum Hull Outboard Evinrude Motor Fishing Boat

$800

Roswell, New Mexico

Year 1992

Make Aluminum

Model -

Category -

Length 10.0

Posted Over 1 Month

10ft Aluminum Hull Fishing Boat9.5 HP Evinrude with variable trolling speed motor2 OarsBoat and Trailer Titles

Vintage solid made heavy duty aluminum boat - very good condition

Vintage solid made heavy duty aluminum boat - very good condition

$850

New Boston, Texas

Year 1970

Make Aluminum

Model -

Category -

Length 12.5

Posted Over 1 Month

I do not what year this boat was made, it was required I put in the year so I just put in 1970 you must see this boat to appreciate how well made & clean it is This is a Vintage solid made heavy duty aluminum boat Nice & deep very sturdy it has had one small weld - repair it was done professionally in the front of the hull Hook up a trolling motor to it & you are ready to go ! Does not leak it is sound & solid very well taken care of - comes with the oars 12 feet 5 inches long & 4 feet 7 inches wide

1960 Aluminum 11' Utility

1960 Aluminum 11' Utility

$1,000

Coos Bay, Oregon

Year 1960

Make Aluminum

Model 11' Utility

Category Powerboats

Length 11'

Posted Over 1 Month

1960 Aluminum 11' Utility 1960 Aluminum 11' Utility Great Used Flat Bottom Boat! This 1960 Aluminum 11’ Utility is a classic aluminum utility boat. This flat bottom boat is great for fishing lakes, and calm river waters. This boat comes complete with bench seating, 1 swivel seat, open storage, loading handles, cleats, oar locks and custom full hull and inside paint job. Ask about our used outboard engine options and ask about our used trailer options. This boat is available now for only $1,000! Contact us today for a complete list of options, or make us an offer by clicking on the “Make an Offer” button on this listing! Please note that all pre-owned accessories and electronics included in the package are not guaranteed by Y Marina. Y Marina will not be responsible for replacing any pre-owned accessories or electronics that do not function properly, unless negotiated with your salesperson prior to the pre-owned package purchase.

2021 G3 Bay 20 DLX

2021 G3 Bay 20 DLX

$36,150

Panama City, Florida

Year 2021

Make G3

Model Bay 20 DLX

Category Aluminum Fish Boats

Length 20

Posted 2 Weeks Ago

This G3 Bay 20 DLX is in nice condition overall. The aluminum hull had good shine and deep reflection. The engine prop was intact, as was the trolling pop. The non-skid deck surface showed little use. The upholstery was generally in good shape with some seams separating, see photos. The owner confirms the Yamaha 115 HP engine, the trolling motor, and Simrad electronics are functioning as expected. Stock #395545 Aluminum Bay Boat with Minn Kota Trolling, Garmin Electronics, and Yamaha 115 HP VMax SHO power! Trailer Included! Get ready to fish the bays and backwaters aboard the aluminum G3 Bay 20 DLX. This G3 is lightly-used and it is available for sale in North Florida! This Bay 20 DLX is pre-wired for a trolling motor and nicely upgraded with a Minn Kota 80 lb thrust trolling motor with i-Pilot. At the helm, the Captain has a Simrad multi-function display attached to the transom-mounted transducer for excellent bottom views. The G3's aluminum hull is just right for stumpy water or handling chop in the bays, lakes and rivers. The boat has two casting seats, two baitwells and lots of fish box space. Seating at the stern folds down for a large casting platform and there is storage under the seats as well. The boat is powered by a Yamaha 115 HP VMax SHO engine with low hours of use. The 2021 aluminum trailer is included in the boat sale. Don't let this one get away! Call or email with questions, or make an offer to hold the G3! Reason for selling is too many toys.

2010 Hanko 19DC

2010 Hanko 19DC

$47,250

Youngsville, Louisiana

Year 2010

Make Hanko

Model 19DC

Category Aluminum Fish Boats

Length 19

Posted 3 Weeks Ago

Kept indoors, the boat, trailer, and motor are in above-average condition. As per the owner, everything works as designed. The engine has been serviced regularly at the end of every season. It is ready for its next owner. Stock #386214 Great river boat! Clean and ready to hit the water! 2010 Hankos 19-foot Dual Console boat. Crafted with precision and passion, Hanko boats are renowned for their rugged durability and exceptional performance. This used gem, powered by a Yamaha 200 hp engine with under 350 hours, is a testament to Hanko's commitment to quality. Constructed with 3/16" aluminum throughout, this boat is sturdy and built to last. Whether cruising through calm waters or braving rough seas, this boat is up for any challenge. Plus, with its indoor storage, this beauty has been well-preserved. Equipped with a custom ski / tow pole, this boat is ready to elevate your water sports experience to new heights. Whether you're carving through waves on skis or towing a tube full of laughter, the Hanko has you covered. But what truly sets this vessel apart is its low-maintenance design. Unlike fragile fiberglass boats, Hanko Aluminum Boats require minimal upkeep. Say goodbye to worries about bumpers, special footwear, or gel hull coatings. With the Hanko, you can focus on enjoying your time on the water, hassle-free. Step into luxury with the added fantail, dual console, and walk-through windshield, providing ample space for you and your crew to relax in style. And with custom swivel seats for both the driver and copilot, along with a stereo system, every journey is a pleasure cruise. Reason for selling is not using enough.

2016 Tracker Pro Team 195 TXW

2016 Tracker Pro Team 195 TXW

$25,000

Florence, Alabama

Year 2016

Make Tracker

Model Pro Team 195 TXW

Category Aluminum Fish Boats

Length 19

Posted 1 Month Ago

The seller reports that the exterior is in good condition and damage-free. The interior is clean and the upholstery and flooring are in very good condition. As with all of our listings, we recommend you perform your own inspection to confirm the condition. Stock #353451 2016 tracker pro 195 txw with 115 four- stroke around 100 hrs. Still has manufacturing stickers on hull. 80 lb minkota ipilot with remote and plug in If you have been looking for that compact fishing boat you can take to the lake or hit the river with, look no further. The 195TXW has the Tracker welded hull design that will provide years of service and let you get into that honey-hole others must avoid. Your 195 is powered with the Mercury 115 HP Four Stroke and equipped with a 30-gallon fuel tank, Garmin electronics, and the Minn Kota Ipilot trolling motor. With only 100 hours on the motor and hull, this Tracker has a lot to offer. Reason for selling is not a good fit for their family.

1987 Custom Tims Marine Inc

1987 Custom Tims Marine Inc

$17,900

Forest, Mississippi

Year 1987

Make Custom

Model Tims Marine Inc

Category Aluminum Fish Boats

Length 20

Posted 1 Month Ago

This is a fair-conditioned aluminum hull boat with normal wear and tear for its age. The batteries are in functioning order and the engine turns over as expected. The outboard motor does run as expected, the owner confirms. The trolling motor and GPS are in functioning order with no defects. Stock #363071 A mean fishing machine that hauls at 42 MPH to your favorite fishing spot. Great trolling motor too. If you are interested in a great custom-built aluminum fishing vessel, then this is a great option that has a fair number of modern upgrades. The Minn Kota i-Pilot trolling motor is paired with the Garmin GPS. The stern has a custom-built rear platform with pedestal seats and additional rear tubes that prevent the light hull configuration from rising with the size of the outboard during acceleration. This custom build also includes a custom center console T-top and plenty of storage compartments.

2022 G3 Bay 20 GX

2022 G3 Bay 20 GX

$45,900

El Campo, Texas

Year 2022

Make G3

Model Bay 20 GX

Category Aluminum Fish Boats

Length 20

Posted 1 Month Ago

This boat is super-clean notwithstanding a couple of scuffs on the starboard side (photo'd) and has is stored in a fully enclosed barn when not in use. All systems and electronics are fully functioning, the owner confirms, and the motor starts right up! Stock #350518 2022 G3 BAY 20GX BAY BOAT, YAMAHA 150 OUTBOARD HORSEPOWER ENGINE, TRAILER INCLUDED! This 2022 G3 20GX Bay Series model features wide, deep hull, exceptional handling and top-end performance, and all of the fishing features needed for a great day on the bay. The Tunnel Hull and jack-plate allow you to jump out of the water and sneak into just about any fishing hole. The dual power poles and Minn Kota trolling motor make staying on the fish a breeze! The boat has dual live wells and plenty of storage, in addition to comfortable seating for 5 and room for up to eight! Reason for selling is upgrading to larger boat.

2023 Sea King 260

2023 Sea King 260

$129,000

Waukegan, Illinois

Year 2023

Make Sea King

Model 260

Category Aluminum Fish Boats

Length 26

Posted 1 Month Ago

This Sea King has yet to be put in the water and as such is in great condition as you would expect. All of the options and features work as they should and there are no visible blemishes inside or marks on the hull. She is ready to go! Stock #318532 2023 Sea King 260 Aluminum Fishing boat Yamaha 300 Outboard 0 hours New!!! When the weather gets bad keep on fishing in this incredible rugged custom fishing machine! Coming to you with zero hours on the commercial 300 Yamaha this is built to take what the elements can throw at it. Beefy 6MM aluminum hull and a tank-like enclosure to keep the cold and weather at bay so you can keep on fishing. The comfortable interior has room to relax when needed and great visibility all around to keep track of what's happening outside. This is a custom one-off design by the current owner so you are unlikely to ever see another one like it. The next owner will need to add their favorite electronics package to finish off the build and get out on the water. She is a great-looking rugged vessel if this is your style don't wait make your offer today!! Reason for selling is getting a bigger boat.

2022 Starcraft Starweld Fusion 18 DC

2022 Starcraft Starweld Fusion 18 DC

$47,900

Westland, Michigan

Year 2022

Make Starcraft

Model Starweld Fusion 18 DC

Category Aluminum Fish Boats

Length 18

Posted 1 Month Ago

All details regarding condition and accessories are provided by the seller. The seller states the vessel is in good condition with very low hours. All systems work as they should. There are no major dents or nicks in the hull. The trailer is in good condition as well. Stock #368341 Low hours, trolling motor with auto pilot, Humminbird Helix 7, full boat cover! This 2022 Starweld Fusion 18 DC by Starcraft is located in Westland, MI. The Fusion hull was designed with input from top professional anglers and features a fully welded, full-length reverse chine and torsion beam stringer system that provides excellent handling characteristics. The seller has added a Helix 7 by Humminbird that is programmed to the 24V Minn Kota Terrova trolling motor and provides spot lock and autopilot. Custom sliding rod holders have been added on both port and starboard gunwales. Another set of rod holders is mounted along the transom. She is powered by a Yamaha 115 VMax SHO outboard and sits on a single axle trailer with upgraded mag wheels. To make an offer or set up a showing please enter stock# 368341 when calling or emailing. Reason for selling is moving to offshore boat.

2007 Sun Tracker Fishin' Deck

2007 Sun Tracker Fishin' Deck

$18,750

Spotswood, New Jersey

Year 2007

Make Sun Tracker

Model Fishin' Deck

Category Aluminum Fish Boats

Length 21

Posted 1 Month Ago

Per the seller, everything is in good working condition on the boat. All of her systems are functioning as they should. The vessel has been well taken care of through the years and it shows that way. The local Mechanics in NJ N&B verified all is in good working order prior to the winterization performed on the 150 EFI with 241 Hours If you would like to see this vessel please do not hesitate to make an appointment. Stock #378337 241 Hours ! 2007 SUN TRACKER FISHIN' DECK DECK BOAT WITH ADDED 2016 MERCURY 9.9 KICKER, INCLUDES TRAILER Here we have a very rare aluminum hull Sun Tracker Fishin' Deck. All aluminum hull construction and a very nice family and fishing platform, not to mention a very nice ride compared to a fiberglass Hull. Yes, this is a dual-purpose vessel with enough room to take out the entire family and also bring those fishing poles in a very large-feeling 21 footer that can be trailered easily to your favorite spot! This vessel has the oil injected 150 Mercury 2-stroke engine with 241 Hours and also a 2016 Mercury 9.9 HP 4-stroke kicker to get you back to the dock if ever needed. There is also a Minn Kota Rip Tide 24V trolling motor on the bow. Four fishing seats, elevated casting positions, bow deck storage also a divided / aerated bow live well There is a generous in-floor storage for rods, wakeboards, skis, and gear. Reason for selling is not being used enough.

1999 Horizon 17

1999 Horizon 17

$13,650

Sunset, Louisiana

Year 1999

Make Horizon

Model 17

Category Aluminum Fish Boats

Length 17

Posted 1 Month Ago

New motor in 2018. Boat and trailer were repainted and outfitted with updated gear. Low hours on the motor, the trailer is in good shape with newer tires. Normal wear and tear on the hull but there are no major dents in the aluminum. Stock #244047 17' powered by a 2018 50HP Tohatsu 4-stroke engine, updated trolling motor, onboard battery chargers! Located in Sunset Louisiana, this is a 1999 Horizon Aluminium 17ft boat with a 2018 four-stroke Tohatsu 50hp engine with very low hours. Throttle control and stick steering are operated at the forward seat giving you a clear view of what's ahead to steer clear of those stumps. The boat was refurbished with all updated carpet and re-painted, along with the trailer. Nicely equipped with a Minn Kota Edge trolling motor and a Humminbird Piranha fishfinder with an updated transponder. Call me today to view this boat or make an offer. Reason for selling is not using enough.

2020 Tracker Pro Guide V16 SC

2020 Tracker Pro Guide V16 SC

$20,750

Spring, Texas

Year 2020

Make Tracker

Model Pro Guide V16 SC

Category Aluminum Fish Boats

Length 16

Posted 1 Month Ago

The boat's durable hull is ready to hit the water! There are several surface scratches but nothing that affects the performance of the boat. The interior is in good condition with little wear on the carpet or vinyl. All systems and electronics are fully functioning, per the seller. Stock #352312 2020 Tracker Pro Guide V16 aluminum fishing boat ready to hit the open water! The Tracker V16 SC is a durable and versatile aluminum fishing boat! Versatile seating arrangements including 6 separate seating locations that can all be changed to suit the day's needs! Forward there is plenty of storage, the trolling motor and a Lowrance fishfinder. Just behind the forward seating area is the large split livewell and the vinyl main floor area. To the rear there is rod storage to port and another raised casting deck. At the helm is a Lowrance GPS-plotter as well as additional storage. The bimini is fantastic for the hot summer days as well! Reason for selling is not using enough.

2019 Tracker Pro Guide V-165 WT

2019 Tracker Pro Guide V-165 WT

$22,750

Salado, Texas

Year 2019

Make Tracker

Model Pro Guide V-165 WT

Category Aluminum Fish Boats

Length 16

Posted 1 Month Ago

According to the seller, the boat is in good running condition. You can see that the engine starts up easily in the video. No noticeable damage to the upholstery on the inside or any large gouges or scratches on the hull. Stock #373627 EXCELLENT 2019 TRACKER PRO GUIDE V-165 WT FISH AND SKI BOAT! 2019 Tracker Pro Guide V-165 WT with 4 seats to bring you and your family for a day of fishing out on the lake. Low hours. The seller said he only took the boat out a few times and estimates the engine hours to be under 20. This boat is loaded with high-end equipment including 4 Cannon Rod Holders and 2 Cannon Down Riggers, a Minn Kota trolling motor, and a Lowrance HOOK. Stay cool and keep the sun off you with a bimini top. Also has a full boat cover, two anchors, and an engine cover. Reason for selling is no longer uses.