- Inmar (2)
- Cadillac Marine (1)
Aluminum_chamber_boats Boats For Sale Boats for sale
1-3 of 3
Sort By
2014 Inmar JP-290-TS New
$1,095
Port Moody, British Columbia
Robert (604) 936-4602 4-850 Barnet Hwy. Port Moody British Columbia V3H 1V6 ? ? ? ? Inmar JP-290-TS Vehicle Information Year: 2014 Make: Inmar Model: JP-290-TS Condition: New ? ? ? ? 1 of 3 ? View Large Images ? ? Description We now offer a perfect aluminum floor recreational tender. The Tender Series ® offers many of the features found in our Professional Inflatables, but with colors and options better suited for the recreational or yacht boater.We are still producing the standard 1100 Decitex tubes, but have added double hull protection standard. This allows 1.8 mm of lower tube protection compared to most other brands at only 0.9 mm. This second layer is added to the rear of the tube bottoms, protecting from those rocky beaches. All our Tender Series have 3 independent air chambers +1 keal air chamber standard. Safety and keeping you afloat is priority one for Inmar Marine.Our Tender Series ® boats are designed to be functional, durable and versatile. Two people can assemble most of our models and have the craft operational in less than 20 minutes.Specifications:- Length: 9' 6"- Beam: 5' 0"- Weight: 105 lbs. (boat w/ floor installed)- Weight capacity: 4 persons / 1,125 lbs.- Max HP/Weight: 10 HP / 95 lbs. / Short shaft- Tube diameter: 16.5" (Separate air chambers 3 + keel)- Fabric: Decitex, Duratex, 0.9 mm.- Factory Warranty: 3 yearsStandard Features:- Non-skid aluminum floor with anodized aluminum stringers- Bow floorboard, wood- Marine plywood transom- Aluminum engine mounting plate- Reinforcement on tube transom attachments- Standard self bailers with plug- All around rub strake, flat profile- Rubbing strakes for beaching on keel and tubes- Carry handles, molded- Bow handle (Stainless)- Exterior lifelines (peripheral)- Reinforcing seat patches on tubes- Two large tow rings on bow (Stainless steal)- Foot pump with hose- Repair kit- Storage bags, bow bag- Two paddles (Alum. shaft, plastic blade) ?Credit Application ?Directions to Dealer ?Contact Us Options and Standard Features Basic Information Year: 2014 Make: Inmar Model: JP-290-TS Stock Number: JPM2TA35E314 VIN: JPM2TA35E314 Condition: New Use: Not Specified Length / Beam Length (Feet): 0 ? Apply Now Secure Credit Application Applying for a vehicle loan online is one of the quickest and easiest application methods. Our secure application is easy to complete, all you need are a few personal and employment details. Contact Inlet Marine 4-850 Barnet Hwy. Port Moody British Columbia V3H 1V6 View Map Ask for:Robert Contact: ?Contact Us Primary Phone:(604) 936-4602 Hours Mon-Fri:09:00 AM-05:00 PM PST Saturday:09:00 AM-03:00 PM PST Sunday:Closed Terms Placing a Bid: Your bid constitutes a legally binding contract to purchase this vehicle. Please do not bid if you're not seriously interested or financially able to purchase this vehicle. Please read eBay's User AgreementInlet Marine reserves the right to, Obtain and verify the registered information of all users who bid on this auction. Cancel any and all bids at our discretion, or end the auction early if necessary.Bidders Age: You must be 18 years of age or older to Bid. Special eBay Bid Retraction Rules: Please read eBay's "Retracting a Bid" If you place a bid before the last 12-hour period of the auction: You may retract that bid before that last 12-hour period but only for exceptional circumstances. You will not be allowed to retract that bid during the last 12-hour period of the auction. If you place a bid during the last 12-hour period of the auction: You will be allowed to retract the bid for exceptional circumstances but only if you do so within one hour after placing the bid.Funds & Financing: For help in arranging for a Pre-Approved loan or for any questions please e-mail or phone Robert at(604) 936-4602 prior to bidding. Buyers Inspection: Inlet Marine has done our best to disclose all information known about this vehicle for auction. Inlet Marine welcomes a buyers inspection. If you plan to have a buyers inspection, please make sure you inspect the vehicle prior to the auction ending. Inspection fees if any are Buyers responsibility. Representations and Warranties made by seller: This vehicle is being sold "as is". Manufacturer's warranties may still apply. Extended warranty may be available, e-mail or phone Robert at (604) 936-4602 for details. No representations or warranties are made by seller, nor are any representations or warranties relied upon by bidders in making bids. Taxes and Registration fees: Out of state buyers are responsible for all state, county, city taxes and fees, as well as title service fees in the state that the vehicle will be registered. All taxes and fees must be paid in full in order for vehicle to be titled and registered. Title Information: Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. If payment is made by cashier's or personal checks we will hold all titles for 10 days or until funds have cleared. Shipping & Delivery: All shipping charges are buyer's responsibility. Inlet Marine will help with shipping arrangements but will not be responsible in any way for claims arising from shipping damage!Licensed Carriers are generally insured for $3,000,000.00. We assume no responsibility for damages incurred after the vehicle leaves our showroom. All shipping arrangements are provided by Inlet Marine as a courtesy. We are not affiliated with any carrier. Any claims or other communication regarding shipment of vehicles will be between you and the shipper, not with Inlet Marine. The amount of time it takes for delivery is dependent on the carrier, but is generally 7-14 days from the date the vehicle is picked up from our facility until it is delivered to your destination. Verify with the shipper for an Estimate Time of Arrival to be sure. Finalizing your Purchase: Inlet Marine will contact the successful high bidder by e-mail after the auction closes. Successful high bidder MUST communicate with Robert at Inlet Marine by e-mail or phone(604) 936-4602 within 24 hours of the auction ending to make arrangements to complete their transaction. If we cannot confirm your intention to buy or the sale is not completed within 5 days, we reserve the right to relist this vehicle or sell to any other qualified buyer. In order to secure bid on vehicle, Successful bidder (BUYER) must within 24 hours of bid closing send to Seller a Deposit in the amount of 10% by major credit card, cash in person or bank certified funds. Within 72 hours of bid closing, Buyer must send balance of funds by cash in person or bank certified funds to Seller. At time of sending initial deposit, Buyer MUST fax copy of their State issued valid Driver License. Furthermore, before said vehicle is released for shipment to Buyer, all other Sale related and title related paperwork must be signed and returned complete to Seller. Copyright © 2017 Auction123 - All rights reserved. - Disclaimer +- Auction123 (a service and listing/software company) and the Seller has done his/her best to disclose the equipment/condition of this vehicle/purchase. However, Auction123 disclaims any warranty as to the accuracy or to the working condition of the vehicle/equipment listed. The purchaser or prospective purchaser should verify with the Seller the accuracy of all the information listed within this ad. Selling a Vehicle? Create Professional Listings Fast and Easy. Click Here!
2015 Inmar JP-320-TS New
$1,195
Port Moody, British Columbia
Robert (604) 936-4602 4-850 Barnet Hwy. Port Moody British Columbia V3H 1V6 ? ? ? ? Inmar JP-320-TS Vehicle Information Year: 2015 Make: Inmar Model: JP-320-TS Condition: New ? ? ? ? 1 of 3 ? View Large Images ? ? Description We now offer a perfect aluminum floor recreational tender. The Tender Series ® offers many of the features found in our Professional Inflatables, but with colors and options better suited for the recreational or yacht boater.We are still producing the standard 1100 Decitex tubes, but have added double hull protection standard. This allows 1.8 mm of lower tube protection compared to most other brands at only 0.9 mm. This second layer is added to the rear of the tube bottoms, protecting from those rocky beaches. All our Tender Series have 3 independent air chambers +1 keal air chamber standard. Safety and keeping you afloat is priority one for Inmar Inflatables.Our Tender Series ® boats are designed to be functional, durable and versatile. Two people can assemble most of our models and have the craft operational in less than 20 minutes.Specifications:- Length: 10' 6"- Beam: 5' 0"- Weight: 125 lbs. (boat w/ floor installed)- Weight capacity: 5 persons / 1,280 lbs.- Max HP/Weight: 15 HP / 110 lbs. / Short shaft- Tube diameter: 16.5" (Separate air chambers 3 + keel)- Fabric: Decitex, Duratex, 0.9 mm.- Factory warranty: 3 yearsStandard Features:- Non-skid aluminum floor with anodized aluminum stringers- Bow floorboard, wood- Marine plywood transom- Aluminum engine mounting plate- Reinforcement on tube transom attachments- Standard self bailers with plug- All around rub strake, flat profile- Rubbing strakes for beaching on keel and tubes- Four carry handles, molded- Bow handle (Stainless)- Exterior lifelines (peripheral)- Reinforcing seat patches on tubes- Two large tow rings on bow (Stainless steal)- Foot pump with hose- Repair kit with pressure gauge- Storage bags, bow bag- Two paddles (Alum. shaft, plastic blade) ?Credit Application ?Directions to Dealer ?Contact Us Options and Standard Features Basic Information Year: 2015 Make: Inmar Model: JP-320-TS Stock Number: JPM3TA51E314 VIN: JPM3TA51E314 Condition: New Use: Not Specified Length / Beam Length (Feet): 0 ? Apply Now Secure Credit Application Applying for a vehicle loan online is one of the quickest and easiest application methods. Our secure application is easy to complete, all you need are a few personal and employment details. Contact Inlet Marine 4-850 Barnet Hwy. Port Moody British Columbia V3H 1V6 View Map Ask for:Robert Contact: ?Contact Us Primary Phone:(604) 936-4602 Hours Mon-Fri:09:00 AM-05:00 PM PST Saturday:09:00 AM-03:00 PM PST Sunday:Closed Terms Placing a Bid: Your bid constitutes a legally binding contract to purchase this vehicle. Please do not bid if you're not seriously interested or financially able to purchase this vehicle. Please read eBay's User AgreementInlet Marine reserves the right to, Obtain and verify the registered information of all users who bid on this auction. Cancel any and all bids at our discretion, or end the auction early if necessary.Bidders Age: You must be 18 years of age or older to Bid. Special eBay Bid Retraction Rules: Please read eBay's "Retracting a Bid" If you place a bid before the last 12-hour period of the auction: You may retract that bid before that last 12-hour period but only for exceptional circumstances. You will not be allowed to retract that bid during the last 12-hour period of the auction. If you place a bid during the last 12-hour period of the auction: You will be allowed to retract the bid for exceptional circumstances but only if you do so within one hour after placing the bid.Funds & Financing: For help in arranging for a Pre-Approved loan or for any questions please e-mail or phone Robert at(604) 936-4602 prior to bidding. Buyers Inspection: Inlet Marine has done our best to disclose all information known about this vehicle for auction. Inlet Marine welcomes a buyers inspection. If you plan to have a buyers inspection, please make sure you inspect the vehicle prior to the auction ending. Inspection fees if any are Buyers responsibility. Representations and Warranties made by seller: This vehicle is being sold "as is". Manufacturer's warranties may still apply. Extended warranty may be available, e-mail or phone Robert at (604) 936-4602 for details. No representations or warranties are made by seller, nor are any representations or warranties relied upon by bidders in making bids. Taxes and Registration fees: Out of state buyers are responsible for all state, county, city taxes and fees, as well as title service fees in the state that the vehicle will be registered. All taxes and fees must be paid in full in order for vehicle to be titled and registered. Title Information: Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. If payment is made by cashier's or personal checks we will hold all titles for 10 days or until funds have cleared. Shipping & Delivery: All shipping charges are buyer's responsibility. Inlet Marine will help with shipping arrangements but will not be responsible in any way for claims arising from shipping damage!Licensed Carriers are generally insured for $3,000,000.00. We assume no responsibility for damages incurred after the vehicle leaves our showroom. All shipping arrangements are provided by Inlet Marine as a courtesy. We are not affiliated with any carrier. Any claims or other communication regarding shipment of vehicles will be between you and the shipper, not with Inlet Marine. The amount of time it takes for delivery is dependent on the carrier, but is generally 7-14 days from the date the vehicle is picked up from our facility until it is delivered to your destination. Verify with the shipper for an Estimate Time of Arrival to be sure. Finalizing your Purchase: Inlet Marine will contact the successful high bidder by e-mail after the auction closes. Successful high bidder MUST communicate with Robert at Inlet Marine by e-mail or phone(604) 936-4602 within 24 hours of the auction ending to make arrangements to complete their transaction. If we cannot confirm your intention to buy or the sale is not completed within 5 days, we reserve the right to relist this vehicle or sell to any other qualified buyer. In order to secure bid on vehicle, Successful bidder (BUYER) must within 24 hours of bid closing send to Seller a Deposit in the amount of 10% by major credit card, cash in person or bank certified funds. Within 72 hours of bid closing, Buyer must send balance of funds by cash in person or bank certified funds to Seller. At time of sending initial deposit, Buyer MUST fax copy of their State issued valid Driver License. Furthermore, before said vehicle is released for shipment to Buyer, all other Sale related and title related paperwork must be signed and returned complete to Seller. Copyright © 2017 Auction123 - All rights reserved. - Disclaimer +- Auction123 (a service and listing/software company) and the Seller has done his/her best to disclose the equipment/condition of this vehicle/purchase. However, Auction123 disclaims any warranty as to the accuracy or to the working condition of the vehicle/equipment listed. The purchaser or prospective purchaser should verify with the Seller the accuracy of all the information listed within this ad. Selling a Vehicle? Create Professional Listings Fast and Easy. Click Here!
Boat Cadillac Marine 1958 Runabout excellent condition
$4,900
Havertown, Pennsylvania
Category -
Length 14.0
Posted Over 1 Month
For Sale is my 1958 Cadillac Marine 14 ft. Mahogany boat. Includes 15 Hp Johnson engine and trailer. Engine was fully serviced and in perfect running condition. This boat has no leaks and is ready to go in the water. I have used in in several lakes in Pa and also used it once in Ocean City NJ at Night in Venice in which it won in the Classic Boat category. This boat is a real head turner when you are out. Its lots of fun to drive. Holds 4 adults easily. Comes with fish/depth finder and radio. Looking for a perfect home. Cadillac Boat Company [II] Cadillac Boat Company was a firm of boat builders located in Cadillac, Wexford County, Michigan, established in 1953. The company was located at 110 7th Street in Cadillac. In 1955, John Bushnell served as manager, secretary, sales manager and purchasing agent. The company employed 27 men and 3 women in 1955. By 1957, employment shot upward to 164 males and 3 females. The company appears to have been renamed Cadillac Marine and Boat Company after 1957. Cadillac Marine and Boat Company Cadillac Marine & Boat Company was a boat building firm located in Cadillac, Wexford County, Michigan between 1958 and 1960, and a continuation of Cadillac Boat Company under the ownership of Wagemaker Co. of Grand Rapids, Michigan. 1958 models were advertised in the 1958 brochure of Wagemaker Wolverine Boats. The company was located at 110 7th St., P.O. Box 65, in Cadillac. Gaylord Gill was the Manager of the firm in 1960. The company was established in 1953. In 1960 the company employed 281 males and 3 females. Sources: Michigan Manufacturer and Financial Record. The Directory of Michigan Manufacturers, 1955 (Detroit, MI: Manufacturer Publishing Co., 1954.) p. 365--classified products section. p. 48-geographic section. Michigan Manufacturer and Financial Record. The Directory of Michigan Manufacturers, 1957 (Detroit, MI: Manufacturer Publishing Co., 1956.) p. 389--classified products section. Michigan Manufacturer and Financial Record. The Directory of Michigan Manufacturers, 1959 (Detroit, MI: Manufacturer Publishing Co., 1958.) p. 401--classified products section. Michigan Manufacturer and Financial Record. The Directory of Michigan Manufacturers, 1960 (Detroit, MI: Manufacturer Publishing Co., 1960.) p. 410--classified products section. p. 52-geographic section. CADILLAC BOAT HISTORY By Andreas Jordahl Rhude [email protected] 22 July 2010 Cadillac Marine & Boat Company of Cadillac, Michigan started in September 1953 as a wholly owned subsidiary of Wagemaker Company. Boat builder Wagemaker of Grand Rapids, Michigan also owned U.S. Molded Shapes, Inc. and Mr. Raymond O. Wagemaker was president of all three firms. The Cadillac Chamber of Commerce was instrumental in luring the boat firm to the city. Across town was a branch plant of Chris-Craft that opened up in 1941. Cadillac made aluminum fishing boats and runabouts. U.S. Molded Shapes made molded veneer boat hulls for Wagemaker which finished them and marketed the boats as Wagemaker Wolverine. Cadillac also made wooden boats with hulls from U.S. Molded Shapes. Between December 1953 and August 1955 Cadillac made 5,300 boats. A production of 7,000 boats annually was not uncommon in subsequent years. A January 1955 full page ad by Cadillac appeared in The Boating Industry trade magazine. They were promoting aluminum, molded wood, and strip-built boats. A photo of their large 100,000 square foot modern plant was prominent in the ad. Wagemaker Company started Empire Boats, Inc. of Frankfort, New York in 1955 to make aluminum, molded veneer, and fiberglass pleasure boats. They were attempting to cover all bases by having wood, aluminum, and fiberglass watercraft in their product mix. 185 Cadillac workers were on strike in July 1956. Two of the strikers were arrested and held in jail on August seventh with charges of malicious destruction of property on the plant grounds. They were accused of turning on fire suppression sprinklers which damaged office files and plant equipment to the tune of $10,000. A $750,000 fire wiped out the Wagemaker plant at Grand Rapids in February 1957. One thousand five hundred hulls were destroyed in addition to production space and equipment. A great deal of production of wooden boats was shifted to Cadillac Marine and Boat Co. To cover all markets, Cadillac added fiberglass boats to their product line in 1959. Probably one of the wildest boats ever conceived was the sixteen-foot Sea Lark. Industrial design Brooks Stevens was on retainer with Evinrude Motors for many years. He was commissioned to design an annual feature boat on which Evinrude could hang their newest motor. It was displayed with great fan fair at the annual Chicago and New York international boat shows. The boat was not necessarily intended to be built for public consumption. It was a means for Evinrude to gain great publicity for their outboard motors. In 1957 Brooks came up with the Sea Lark to promote the new 35 horse power Lark outboard motor. The boat had a molded wood hull with fiberglass deck and aluminum trim. It was a marriage of the three boat building operations owned by Ray Wagemaker. The sporty two seat speedster had massive fins and featured twin bubble windshields. As far as can be determined, Cadillac made two of these boats. One has been discovered and is the coveted possession of a classic boat collector today. The boat firm first filed for trademark protection of “Cadillac” on October 28, 1955 and it was published in the Official U.S. Patent Register in March 1956. A month later General Motors filed an opposition with the Patent and Trademark Office. Going a step further, General Motors filed a lawsuit against Cadillac Marine & Boat Co. in February 1957 claiming the auto maker had rights to the name "Cadillac" and they wanted the boat builder to cease and desist using the name. In 1964 a federal court slapped the automaker's hands and said they did not have a monopoly on the name Cadillac. GM was ordered to pay $41,000 to the boat maker for legal fees and loss of reputation. Cadillac Boat had a full page ad in The Boating Industry in May 1958. They pictured and describe aluminum, combination of aluminum and fiberglass, and molded wood boats. They were promoted as the “sweetest boat afloat.” Wagemaker also had a full page ad and [US Molded Shapes|U.S. Molded Shapes]] had half a page of advertising space in the issue. Thirty workers were back on the job in March 1960 after the plant being closed for one month. On April 15, 1960 Ray Wagemaker sold all his boat operations to three men: Walter E. Schott, Jr.; Charles J. Schott; and Harrison O. Ash. The Schott's also owned Lyman Boat Works of Sandusky, Ohio through their Curtis Manufacturing business. Operations of Wagemaker Wolverine and U.S. Molded Shapes were shifted to Cadillac Marine & Boat Co. after a $250,000 fire hit the U.S. Molded Shapes plant about April 23, 1960, just days after the sale. The former B.F. Goodrich plant at Cadillac was secured for production space. Harrison Ash gained complete control of Wagemaker, Cadillac, and U.S. Molded Shapes in April 1961. He changed the business names to Ash-Craft Company at that time. U.S. Molded Shapes, Inc. at Cadillac, Michigan was on the auction block on Tuesday 10 October 10, 1961. The machinery and brand name and good will were purchased by Chicago businessmen Frank Zale and Jerry Fencl. Fencl was head of Delta Boat and Marine Sales of Oaklawn, a builder of wooden boats. They had been obtaining their hulls from the Cadillac operation. Fencl’s brother Milo operated MiloCraft Boats of Chicago, another builder of molded veneer boats. Only a few months later, in January 1962, U.S. Molded Shapes was sold to Kenneth Zick of Charlotte, Michigan. Eighteen workers were on the payroll at the time. U.S. Molded Shapes of Cadillac was advertising in the January 1962 issue of The Boating Industry. Ash-Craft, makers of Wolverine and Cadillac Boats, had a four page, full color brochure inserted in the magazine. Ash was attempting to move all the boat production to West Virginia under another one of his firm umbrellas, New-Kanawha Industrial Corp. in 1961. On November 2, 1962 all the firms owned by Ash filed for bankruptcy. It cannot determine if boats were ever built in West Virginia. It is not know when boats were no longer being built by Cadillac in Michigan. When the federal court awarded "Cadillac Marine and Boat Co." the $41,000 in 1964 in the failed suit brought by General Motors, it is unknown who got that money. Was it Mr. Ash or was there a corporate shell of Cadillac Marine still around or did it go to the bankruptcy referee or trustee?
