Boats For Sale In Branch Boats for sale

1-5 of 5

Sort By

1997 Sea Ray 330 Sundancer

1997 Sea Ray 330 Sundancer

$29,500

Claremore, Oklahoma

Year 1997

Make Sea Ray

Model 330 Sundancer

Category Cruiser Boats

Length 33

Posted Over 1 Month

The seller states this Sundancer is in good condition. The boat has service records and receipts, and the engines are original and run smoothly, the owner confirms. The interior is in excellent condition, and the exterior has expected minor scrapes and blemishes. The radar arch was damaged by a tree branch (six years ago) and has been repaired (see photos), the seller says it still needs to be buffed and needs some minor fiberglass repairs. The local marina did a recent arch repair, and the seller has priced the boat accordingly, and it's ready for a new home. Needs washing and a bit of TLC. Runs great with just over 500 engine hours on both 7.4L Mercruisers. New water heater, windshield (Summer 2019), starters (Summer 2020), impeller in starboard engine, steering cable and props (June 2023), bilge pump (June 2023), and batteries (June 2023). The port engine impeller needs to be replaced. Partial new canvases, overall in fair condition. Stock #350893 ***SALE PENDING*** Nice 330 Sundancer powered by twin 454 Mercruisers! Low hours! Recent batteries, starters & water heater! Beautiful interior! Located in Claremore, Oklahoma, this 34-foot used Sea Ray 330 Sundancer is a World-Class boat with plenty of room for the whole family! The Sea Ray 330 Sundancer has all the features of a big cruiser in a unique layout. Below deck, you'll find a compact galley area, a V-berth, a mid-berth, generous storage, a U-shaped dinette, and a wet bath with shower, sink, and vanity. On deck, Sundancer's roomy cockpit includes everything for entertaining and relaxing, like a triple helm seat, U-shaped aft seating, a refreshment center with a wet bar and cooler, and even a full camper enclosure for when you want to get out of the weather. Powered by twin Mercruiser 7.4L engines, the 330 Sundancer has lots of power for cruising. Don't miss out on your opportunity to own this Sea Ray cruiser! Reason for selling is buying another boat.

FOR

FOR

$7,500

Warsaw, New York

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

Welcome to Atomix Boats Co. Ltd, We specialize in the sale of brand new boat motors and brand new outboard parts through the Internet. brand new units, And outboard parts. Feel free to send us an email If you have a specific question regarding our outboard inventory. We sell every brand in 2 and 4-stroke including; brand new Johnson Outboards, Evinrude, Yamaha, Sears Gamefisher, Honda, Suzuki, Tohatsu, Tanaka, Briggs & Stratton, Nissan, Force, Sailmaster, Yachtwin, Sailboat Outboards, Briggs and Stratton, Pump Jet, and Mercury Outboards. FOR PURCHASE: - E-mail: [email removed] Call To Purchase:+971-55-7232494 USA-Branch CALL-OR-SMS: (585) 687-8523 ============================= New 2015-Mercury 350 Verado XL 4-stroke-outboard motor $7,500 New 2015-Mercury Four Stroke 100 HP EFI Outboard Engine $6, 500usd New 2015- Mercury Pro FourStroke 250 - 300 HP Outboard Motor $8, 000 usd New 2015- Mercury OptiMax 250HP Sport XS $7, 000 usd New 2015-Mercury 125 HP OptiMax $5, 400 usd New 2015-Mercury 150 HP OptiMax $6, 000 usd ============================= Suzuki 9. 9HP 4-Stroke Outboard Motor $3, 800 usd Suzuki 90HP 4-Stroke Outboard Motor $5, 000 usd Suzuki 60HP 4-Stroke Outboard Motor $4, 000 usd Suzuki 100HP 4 Stroke Outboard Motor $6, 000 usd Suzuki 115HP 4 Stroke Outboard Motor $7, 500 usd Suzuki 140HP 4 Stroke Outboard Motor $8, 000 usd Suzuki 200HP 4 Stroke Outboard Motor $9, 100 usd Suzuki 225HP 4 Stroke Outboard Motor $10, 300 usd ============================= New-2014/15 Tohatsu 90 hp TLDI 2-Stroke Outboards $5, 500 usd New-2014-2014/15 Tohatsu 115 hp TLDI 2-Stroke Outboard $6, 000 usd New-2014/15 Tohatsu 30 hp EFI 4-Stroke Outboard $5, 000 usd ============================= New 2015-Yamaha vmax SHO 250HP Outboard Motor $8, 000USD New 2015-Yamaha VMAX SHO VF 200 HP 4 Stroke Outboard Motor $7, 400 usd New 2015-Yamaha F20LEHA 20HP 4-Stroke Outboards Motor $5, 000usd New 2015-Yamaha F25D 4 stroke outboard engine with tiller handle 25hp $5, 500 Yamaha 90HP Four 4 Stroke Outboard Motor Engine $4, 800usd Yamaha 60 HP 4 Stroke Outboard Motor Engine $4, 500 usd Yamaha 30 HP 4 Stroke Outboard Motor Engine $4, 000 usd Yamaha 40 HP 4 Stroke Outboard Motor Engine $4, 300 usd Yamaha 75 HP 4-Stroke Outboard Motor Engine $5, 000 usd Yamaha 115hp, F115LA 4-stroke, 4-cylinder, 20" Shaft -Electric Start - Remote Steering $6, 500 usd Yamaha 350hp, F350XCA 5. 3L V8 Four Stroke, 25" Shaft -Electric Start - Remote Steering $7, 200 usd ============================= Do Contact us via E-mail if Interested in making a Purchase for any-Engine. E-mail: [email removed] Call To Purchase:+971-55-723-2494 USA-Branch CALL-OR-SMS: (585) 687-8523 Thanks and Best Regards.

2017 Sportsman 212 Heritage

2017 Sportsman 212 Heritage

$61,250

Sarasota, Florida

Negotiable

Year 2017

Make Sportsman

Model 212 Heritage

Category Cruiser Boats

Length 20.92

Posted Over 1 Month

2017 Sportsman Center Console for Sale A vivacious wake and a sleek profile - the 2017 Sportsman Center Console has it all! This beauty with a length overall (LOA) of 20.92 ft and a beam of 8.42 ft sits ready for you at Flowery Branch, GA eagerly awaiting her next fishing adventure. Vessel Details How would it feel to navigate the waves in a 2017 Sportsman? Known for their craftsmanship, Sportsman delivers high performance with this vessel, designed with optimal comfort and boating efficiency in mind. As a center console design, it provides an excellent vantage point for navigation and fishing, as well as an array of storage options for all your maritime necessities. With an expansive LOA of 20.92 feet and a considerable beam of 8.42 feet, this vessel assures a stable and smooth sailing experience. Its spacious dimensions give you enough room to move around and perform your cruising, angling, or sunbathing tasks with ease. Despite her size, this boat is surprisingly easy to manage and at an asking price of only $61,250, it represents a fantastic value! Reliable Partner, KYA Brokers As boating enthusiasts ourselves, we at KYA Brokers have plenty of experience both on and off the water, and our staff consists of only the most knowledgeable, dedicated and passionate individuals. We take our role seriously in translating your boating dreams into a tangible reality. This 2017 Sportsman Center Console, is just waiting to make her way to your dock. Don't miss out on the opportunity to add this fantastic vessel to your fleet or start your boating journey with her. Please contact us at KYA Brokers for more information or to arrange a viewing. We encourage potential customers to get in touch with us; we're more than happy to answer any questions, schedule tests, and facilitate your path to becoming the owner of this beautiful vessel. Note: This vessel is sold as is and by the owner, without any promises regarding condition or maintenance. The above description is based on the information provided by the owner and the manufacturer. We recommend that prospective buyers perform a comprehensive inspection before purchase. Disclaimer The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Boat Cadillac Marine 1958 Runabout excellent condition

Boat Cadillac Marine 1958 Runabout excellent condition

$4,900

Havertown, Pennsylvania

Year 1958

Make Cadillac Marine

Model 554

Category -

Length 14.0

Posted Over 1 Month

For Sale is my 1958 Cadillac Marine 14 ft. Mahogany boat. Includes 15 Hp Johnson engine and trailer. Engine was fully serviced and in perfect running condition. This boat has no leaks and is ready to go in the water. I have used in in several lakes in Pa and also used it once in Ocean City NJ at Night in Venice in which it won in the Classic Boat category. This boat is a real head turner when you are out. Its lots of fun to drive. Holds 4 adults easily. Comes with fish/depth finder and radio. Looking for a perfect home. Cadillac Boat Company [II] Cadillac Boat Company was a firm of boat builders located in Cadillac, Wexford County, Michigan, established in 1953. The company was located at 110 7th Street in Cadillac. In 1955, John Bushnell served as manager, secretary, sales manager and purchasing agent. The company employed 27 men and 3 women in 1955. By 1957, employment shot upward to 164 males and 3 females. The company appears to have been renamed Cadillac Marine and Boat Company after 1957. Cadillac Marine and Boat Company Cadillac Marine & Boat Company was a boat building firm located in Cadillac, Wexford County, Michigan between 1958 and 1960, and a continuation of Cadillac Boat Company under the ownership of Wagemaker Co. of Grand Rapids, Michigan. 1958 models were advertised in the 1958 brochure of Wagemaker Wolverine Boats. The company was located at 110 7th St., P.O. Box 65, in Cadillac. Gaylord Gill was the Manager of the firm in 1960. The company was established in 1953. In 1960 the company employed 281 males and 3 females. Sources: Michigan Manufacturer and Financial Record. The Directory of Michigan Manufacturers, 1955 (Detroit, MI: Manufacturer Publishing Co., 1954.) p. 365--classified products section. p. 48-geographic section. Michigan Manufacturer and Financial Record. The Directory of Michigan Manufacturers, 1957 (Detroit, MI: Manufacturer Publishing Co., 1956.) p. 389--classified products section. Michigan Manufacturer and Financial Record. The Directory of Michigan Manufacturers, 1959 (Detroit, MI: Manufacturer Publishing Co., 1958.) p. 401--classified products section. Michigan Manufacturer and Financial Record. The Directory of Michigan Manufacturers, 1960 (Detroit, MI: Manufacturer Publishing Co., 1960.) p. 410--classified products section. p. 52-geographic section. CADILLAC BOAT HISTORY By Andreas Jordahl Rhude [email protected] 22 July 2010 Cadillac Marine & Boat Company of Cadillac, Michigan started in September 1953 as a wholly owned subsidiary of Wagemaker Company. Boat builder Wagemaker of Grand Rapids, Michigan also owned U.S. Molded Shapes, Inc. and Mr. Raymond O. Wagemaker was president of all three firms. The Cadillac Chamber of Commerce was instrumental in luring the boat firm to the city. Across town was a branch plant of Chris-Craft that opened up in 1941. Cadillac made aluminum fishing boats and runabouts. U.S. Molded Shapes made molded veneer boat hulls for Wagemaker which finished them and marketed the boats as Wagemaker Wolverine. Cadillac also made wooden boats with hulls from U.S. Molded Shapes. Between December 1953 and August 1955 Cadillac made 5,300 boats. A production of 7,000 boats annually was not uncommon in subsequent years. A January 1955 full page ad by Cadillac appeared in The Boating Industry trade magazine. They were promoting aluminum, molded wood, and strip-built boats. A photo of their large 100,000 square foot modern plant was prominent in the ad. Wagemaker Company started Empire Boats, Inc. of Frankfort, New York in 1955 to make aluminum, molded veneer, and fiberglass pleasure boats. They were attempting to cover all bases by having wood, aluminum, and fiberglass watercraft in their product mix. 185 Cadillac workers were on strike in July 1956. Two of the strikers were arrested and held in jail on August seventh with charges of malicious destruction of property on the plant grounds. They were accused of turning on fire suppression sprinklers which damaged office files and plant equipment to the tune of $10,000. A $750,000 fire wiped out the Wagemaker plant at Grand Rapids in February 1957. One thousand five hundred hulls were destroyed in addition to production space and equipment. A great deal of production of wooden boats was shifted to Cadillac Marine and Boat Co. To cover all markets, Cadillac added fiberglass boats to their product line in 1959. Probably one of the wildest boats ever conceived was the sixteen-foot Sea Lark. Industrial design Brooks Stevens was on retainer with Evinrude Motors for many years. He was commissioned to design an annual feature boat on which Evinrude could hang their newest motor. It was displayed with great fan fair at the annual Chicago and New York international boat shows. The boat was not necessarily intended to be built for public consumption. It was a means for Evinrude to gain great publicity for their outboard motors. In 1957 Brooks came up with the Sea Lark to promote the new 35 horse power Lark outboard motor. The boat had a molded wood hull with fiberglass deck and aluminum trim. It was a marriage of the three boat building operations owned by Ray Wagemaker. The sporty two seat speedster had massive fins and featured twin bubble windshields. As far as can be determined, Cadillac made two of these boats. One has been discovered and is the coveted possession of a classic boat collector today. The boat firm first filed for trademark protection of “Cadillac” on October 28, 1955 and it was published in the Official U.S. Patent Register in March 1956. A month later General Motors filed an opposition with the Patent and Trademark Office. Going a step further, General Motors filed a lawsuit against Cadillac Marine & Boat Co. in February 1957 claiming the auto maker had rights to the name "Cadillac" and they wanted the boat builder to cease and desist using the name. In 1964 a federal court slapped the automaker's hands and said they did not have a monopoly on the name Cadillac. GM was ordered to pay $41,000 to the boat maker for legal fees and loss of reputation. Cadillac Boat had a full page ad in The Boating Industry in May 1958. They pictured and describe aluminum, combination of aluminum and fiberglass, and molded wood boats. They were promoted as the “sweetest boat afloat.” Wagemaker also had a full page ad and [US Molded Shapes|U.S. Molded Shapes]] had half a page of advertising space in the issue. Thirty workers were back on the job in March 1960 after the plant being closed for one month. On April 15, 1960 Ray Wagemaker sold all his boat operations to three men: Walter E. Schott, Jr.; Charles J. Schott; and Harrison O. Ash. The Schott's also owned Lyman Boat Works of Sandusky, Ohio through their Curtis Manufacturing business. Operations of Wagemaker Wolverine and U.S. Molded Shapes were shifted to Cadillac Marine & Boat Co. after a $250,000 fire hit the U.S. Molded Shapes plant about April 23, 1960, just days after the sale. The former B.F. Goodrich plant at Cadillac was secured for production space. Harrison Ash gained complete control of Wagemaker, Cadillac, and U.S. Molded Shapes in April 1961. He changed the business names to Ash-Craft Company at that time. U.S. Molded Shapes, Inc. at Cadillac, Michigan was on the auction block on Tuesday 10 October 10, 1961. The machinery and brand name and good will were purchased by Chicago businessmen Frank Zale and Jerry Fencl. Fencl was head of Delta Boat and Marine Sales of Oaklawn, a builder of wooden boats. They had been obtaining their hulls from the Cadillac operation. Fencl’s brother Milo operated MiloCraft Boats of Chicago, another builder of molded veneer boats. Only a few months later, in January 1962, U.S. Molded Shapes was sold to Kenneth Zick of Charlotte, Michigan. Eighteen workers were on the payroll at the time. U.S. Molded Shapes of Cadillac was advertising in the January 1962 issue of The Boating Industry. Ash-Craft, makers of Wolverine and Cadillac Boats, had a four page, full color brochure inserted in the magazine. Ash was attempting to move all the boat production to West Virginia under another one of his firm umbrellas, New-Kanawha Industrial Corp. in 1961. On November 2, 1962 all the firms owned by Ash filed for bankruptcy. It cannot determine if boats were ever built in West Virginia. It is not know when boats were no longer being built by Cadillac in Michigan. When the federal court awarded "Cadillac Marine and Boat Co." the $41,000 in 1964 in the failed suit brought by General Motors, it is unknown who got that money. Was it Mr. Ash or was there a corporate shell of Cadillac Marine still around or did it go to the bankruptcy referee or trustee?

1998 Angler 204 WA

1998 Angler 204 WA

$9,700

Orlando, Florida

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

1998 Angler 204 WA Please contact the owner directly @ 407-963-7013 or ...Hull is a 1998 wa 1999 Honda 130 four stroke wa 2000 Performance single axle trailer.Engine has less than 100 hours and was just serviced and new vapor box and high pressure fuel pump installed. Boat includes Humming bird fish finderdepthGPS unit,2 anchors, life jackets, porta potty and swim up ladder.Trailer has new tires and spare, replaced axle and leaf springs 3 years ago. Boat is super clean with two small areas of gel coat damage about the size of a half dollar and a bent rail from a falling branch. Boat was purchased in 2000 new for 22,000. Sale is cash only and as is condition. Pick up in Orlando. Make: Angler Model: 204 WA Length: 20 Dealer: BoatsFSBO.com ID: 245522 Ad provided by BoatingBay