Custom Jon Boats Boats for sale

2010 Custom 12

$10,000

Springfield, South Dakota

Year 2010

Make Custom

Model 12

Category Airboats

Length 12

Posted 1 Month Ago

The seller stated that all systems are in good running order and ready for your inspection! While we will always try our best to provide you with an accurate representation of every boat we market, you will be encouraged to inspect the boat or have the boat inspected. Stock #335834 ONE OF A KIND!! CUSTOM BUILT!! 2010 Airboat, Carbon Fiber Construction, R1 Engine! This one-of-a-kind 2010 Custom 12 airboat was built by the revered Jon Staudacher, who built the Miss Budweiser hydrofoil boats and is very well-known for his aeronautical achievements as the leading American designer and builder of aerobatic planes. Fitted with the Yamahas R1 4-cylinder motorcycle engine, this airboat almost screams with three passengers. It also has tundra tires that attach to the sides so that it can be pulled up on shore. If you're looking to own an Airboat that was built by a wizard in the air and on the water, this is the boat for you! Reason for selling is upgrading.

2010 Custom 12

$10,000

Springfield, South Dakota

Year 2010

Make Custom

Model 12

Category Airboats

Length 12

Posted 1 Month Ago

The seller stated that all systems are in good running order and ready for your inspection! While we will always try our best to provide you with an accurate representation of every boat we market, you will be encouraged to inspect the boat or have the boat inspected. Stock #335834 ONE OF A KIND!! CUSTOM BUILT!! 2010 Airboat, Carbon Fiber Construction, R1 Engine! This one-of-a-kind 2010 Custom 12 airboat was built by the revered Jon Staudacher, who built the Miss Budweiser hydrofoil boats and is very well-known for his aeronautical achievements as the leading American designer and builder of aerobatic planes. Fitted with the Yamahas R1 4-cylinder motorcycle engine, this airboat almost screams with three passengers. It also has tundra tires that attach to the sides so that it can be pulled up on shore. If you're looking to own an Airboat that was built by a wizard in the air and on the water, this is the boat for you! Reason for selling is upgrading.

Custom 14 Foot Backwaters Fishing Hunting Boat Motor Trailer 2013 Suzuki 4 Cycle

$1,995

Wabasha, Minnesota

Year 1974

Make Jon Boat

Model Flatbottom

Category Fishing Boats

Length 14.0

Posted Over 1 Month

Check out this One of a Kind fishing or hunting vessel custom built by Grey Ghost Garage including boat, motor, and trailer. The boat itself is a 1974 14 foot oil painted backwater flat-bottom powered by a 2013 DF2.5 Suzuki 4 Cycle/Stroke 2.5 horse with integrated fuel tank and only 20 hours of use paired up with a 30-lb thrust Minn-Kota trolling motor. As with everything on and in this boat, the following features are in excellent condition and high in quality: Collapsible Bimini Top with heavy duty screen material; Lots of Brass and Stainless hardware; Carpeted and removable floor thru-out; Two removable and hinged upper deck sections; manual anchor winch system; front glove-box/casting platform; New marine battery; 4 rod holders; Brass drain plug. The 1984 heavy-duty trailer has brand-new heavy duty tires; New spare rim with new tire; Freshly packed bearings; New LED light kit including rear and side marker LED lights and all new wiring from the plug on back; New 1200-lb winch; requires 1 7/8 inch ball-hitch. Everything has clean titles and registrations. The boat was designed and built in summer 2012 and used during late summer with only the trolling motor. The motor was added in the spring of 2013. The vessel has not been used during the 2014 season due to high water, then low water, then high again, it was overall undesirable water conditions so the vessel has been stored inside since the end of the 2013 season. I am only selling because I am ready for a new toy. This has been a blast to own and is in great shape.

2016 Custom Custom Build Jon

$8,500

Versailles, Kentucky

Year 2016

Make Custom

Model Custom Build Jon

Category Jon Boats

Length 16'

Posted Over 1 Month

2016 Custom Custom Build Jon This boat is a one of a kind! Everything is brand new and only used a handful of times. Motor has less than 5 hrs. Trailer powder coated with custom skirts. New tires and led lighting. 30" light bar, hydraulic jack plate. Hydro turf throughout boat. Trailer is a roller trailer. Boat has been stripped and repainted. Controls and all cables brand new. Wired for trolling motor. Trolling motor plate. New Pyle radio with 300 watt amp 4 speakers 6 gauges. Custom welding throughout. Extruded aluminum floor. Motor Mercury 60 hp. With cmc hydraulic jack plate Call Reesha or Jim for more information. - Custom Build Jon

2007 Custom Drone 15

$12,950

Aurora, Oregon

Year 2007

Make Custom

Model Drone 15

Category Jon Boats

Length 15'

Posted Over 1 Month

2007 Custom Drone 15 2007 Duckwater Marine Aluminium 15 Ft. Duck blind boat equipped with a 2008 50 HP Suzuki 4 stroke motor series model DF50TLK8, and a 2007 Venture brand 2200 lb series VB-1750 boat trailer. Boat includes all accessories for duck hunting and accomodates room for (3) hunters. Boat is like new and has low hours on the motor.

2015 CUSTOM CAROLINA 16 Center Console

$16,900

Wilmington, North Carolina

Year 2015

Make CUSTOM CAROLINA

Model 16 Center Console

Category Jon Boats

Length 16'

Posted Over 1 Month

2015 CUSTOM CAROLINA 16 Center Console New Build! This Custom Built 16 foot boat was cold molded using nothing but the best materials - full epoxy build! She is powered by an efficient Mercury 30 HP fuel injected Four Stroke with electric start and tilt trim. The hull was designed as a Harkers Island work boat with modern outboard power. This boat floats in less than 5 inches of water, tops out around 25 mph and sips fuel. She turns heads everywhere she goes. More details and specs on the way- call or email now!!!

Low Country Backwater 1442 custom flat bottom jon boat & trailer

$2,895

Columbia, South Carolina

Year 2015

Make Low Country Boats

Model Backwater Series 1442

Category Jon Boats

Length 14.0

Posted Over 1 Month

The Backwater Series is designed for the outdoorsman looking for a rugged and reliable boat in a smaller more affordable package. These boats are perfect for sneaking through timber and getting you back to that secret honey hole. Made with 1/8 inch marine grade aluminum and fully welded, these hulls are built strong to last. Can build custom in lengths from 12'-15' with bottom widths from 32"- 44" AUCTION IS FOR BOAT/TRAILER...MOTOR NOT INCLUDED Specs and Features: Wesco galvanized trailer .125" 5052 Aluminum Hull 16" Transom Height 17" Side Height Longitudinal Ribs HD Transom 1-1/2" HD Gunnel Rails Open layout w/ single bench seat 48" Front Deck Welded Tow Hook Welded custom Transom and Bow Handles Oceangrip camo non skid flooring Custom paint

1967 Custom South Bay Scooter Duck Boat

$7,000

Duxbury, Massachusetts

Year 1967

Make Custom

Model South Bay Scooter Duck Boat

Category Antique And Classic Boats

Length 12

Posted Over 1 Month

67 12 foot Duck Hunting Boat ready to go hunting! Hand laid fiberglass not glas over plywood. Super stable wide beam. Comes with two 7.5hp air cooled four stroke motors, low hours fresh water only since new. Original pats with locks and hand tooled shell baskets. More quiet and soils than aluminum Jon boat.

Low Country Backwater Series 1236 camo custom flat bottom jon boat

$1,899

Columbia, South Carolina

Year 2015

Make Low Country Boats

Model Backwater Series 1236

Category Jon Boats

Length 12.0

Posted Over 1 Month

The Backwater Series is designed for the outdoorsman looking for a rugged and reliable boat in a smaller more affordable package. These boats are perfect for sneaking through timber and getting you back to that secret honey hole. Made with 1/8 inch marine grade aluminum and fully welded, these hulls are built strong to last. Can build custom in lengths from 12'-16' with bottom widths from 32"- 48" AUCTION IS FOR BOAT ONLY Local pickup available or will Freight on pallet. Usually between $300-500 depending on location. Specs and Features: .125" 5052 Aluminum Hull 10HP Motor Rating 16" Transom Height 16.5" Side Height Longitudinal Ribs HD Transom 1-1/2" HD Gunnel Rails Bench Seats 42" Front Deck w/ pedestal base Welded Tow Hook Welded custom Transom and Bow Handles Grab bar Custom camo paint Navigation lights

Low Country Backwater Series 1236 camo custom flat bottom jon boat & trailer

$2,499

Columbia, South Carolina

Year 2015

Make Low Country Boats

Model Backwater Series 1236

Category Jon Boats

Length 12.0

Posted Over 1 Month

The Backwater Series is designed for the outdoorsman looking for a rugged and reliable boat in a smaller more affordable package. These boats are perfect for sneaking through timber and getting you back to that secret honey hole. Made with 1/8 inch marine grade aluminum and fully welded, these hulls are built strong to last. AUCTION IS FOR BOAT/TRAILER...MOTOR NOT INCLUDED Specs and Features: Wesco galvanized trailer .125" 5052 Aluminum Hull 16" Transom Height 16.5" Side Height Longitudinal Ribs HD Transom 1-1/2" HD Gunnel Rails Bench Seats 42" Front Deck w/ pedestal base Welded Tow Hook Welded custom Transom and Bow Handles Grab bar Custom camo paint Navigation lights

Low Country Backwater 1442 custom flat bottom w/ Beavertail 13HP & trailer

$5,795

Columbia, South Carolina

Year 2015

Make Low Country Boats

Model Backwater Series 1442

Category Jon Boats

Length 14.0

Posted Over 1 Month

The Backwater Series is designed for the outdoorsman looking for a rugged and reliable boat in a smaller more affordable package. These boats are perfect for sneaking through timber and getting you back to that secret honey hole. Made with 1/8 inch marine grade aluminum and fully welded, these hulls are built strong to last. AUCTION IS FOR COMPLETE BOAT PACKAGE Specs and Features: Beavertail 13HP mud motor Wesco galvanized trailer .125" 5052 Aluminum Hull 16" Transom Height 17" Side Height Longitudinal Ribs HD Transom 1-1/2" HD Gunnel Rails Open layout w/ single bench seat 48" Front Deck Welded Tow Hook Welded custom Transom and Bow Handles Oceangrip camo non skid flooring Custom paint

Low Country Backwater 1236 camo custom flat bottom w/ Beavertail 6.5HP & trailer

$4,995

Columbia, South Carolina

Year 2015

Make Low Country Boats

Model Backwater Series 1236

Category Jon Boats

Length 12.0

Posted Over 1 Month

The Backwater Series is designed for the outdoorsman looking for a rugged and reliable boat in a smaller more affordable package. These boats are perfect for sneaking through timber and getting you back to that secret honey hole. Made with 1/8 inch marine grade aluminum and fully welded, these hulls are built strong to last. AUCTION IS FOR COMPLETE BOAT PACKAGE Specs and Features: Beavertail 6.5HP mud motor Wesco galvanized trailer 7.5HP motor rating .125" 5052 Aluminum Hull 16" Transom Height 16.5" Side Height Longitudinal Ribs HD Transom 1-1/2" HD Gunnel Rails Bench Seats 42" Front Deck w/ pedestal base Welded Tow Hook Welded custom Transom and Bow Handles Grab bar Custom camo paint

Low Country Backwater Series 1442 tan custom built flat bottom boat w/trailer

$2,995

Columbia, South Carolina

Year 2015

Make Low Country Boats

Model Backwater 1442

Category Jon Boats

Length 14.0

Posted Over 1 Month

The Backwater Series is designed for the outdoorsman looking for a rugged and reliable boat in a smaller more affordable package. These boats are perfect for sneaking through timber and getting you back to that secret honey hole. Made with 1/8 inch marine grade aluminum and fully welded, these hulls are built strong to last. AUCTION IS FOR HULL AND TRAILER ONLY Specs and Features: Wesco galvanized trailer 15HP motor rating Hull Weight: 270 lbs. .125" 5052 Aluminum Hull 16" Transom Height 17" Side Height Longitudinal Ribs w/false floor 3" Transom Channel 1-1/2" HD Gunnel Rails Bench Seat 42" Front Deck Tow Hook Transom and Bow Handles Custom paint

Low Country Backwater Series 1242 camo custom built flat bottom boat

$1,695

Columbia, South Carolina

Year 2015

Make Low Country Boats

Model Backwater 1242

Category Jon Boats

Length 12.0

Posted Over 1 Month

The Backwater Series is designed for the outdoorsman looking for a rugged and reliable boat in a smaller more affordable package. These boats are perfect for sneaking through timber and getting you back to that secret honey hole. Made with 1/8 inch marine grade aluminum and fully welded, these hulls are built strong to last. AUCTION IS FOR HULL ONLY Specs and Features: 10HP motor rating Hull Weight: 235 lbs. .125" 5052 Aluminum Hull 16" Transom Height 15" Side Height Longitudinal Ribs w/false floor 3" Transom Channel 1-1/2" HD Gunnel Rails Bench Seat 42" Front Deck Tow Hook Transom and Bow Handles Custom camo paint

2017 Havoc Boats 1556

$7,660

Southaven, Mississippi

Year 2017

Make Havoc Boats

Model 1556

Category Jon Boats

Length 15'

Posted Over 1 Month

2017 Havoc Boats 1556 This new 2017 Havoc 1556 RDB is a new model for 2017 and available at Southaven RV & Marine in Southaven Ms., just 5 minutes south of Memphis Tn.. She is available in several engine options up to 40 horsepower. (Yamaha, Mercury, Boss Drive). HD Timer paint, superliner, rod box with two rod tubes, rod tray/gun tray with 1 tube, and rear deck lid. She comes with a custom Havoc Aluminum Trailer. Stop bye today and look at our full line of Havoc Boats