Custom Made Boats for sale

1-15 of 2,890

Sort By

2020 Custom Bay 16

2020 Custom Bay 16

$28,000

Harlingen, Texas

Year 2020

Make Custom

Model Bay 16

Category Bay Boats

Length 16

Posted 1 Month Ago

This Bay Boat appears very well taken care of. All of the wells and storage are clean and no staining. There are no signs of damage and very little wear. Stock #377152 For sale, 2020 Custom made bay boat, 2019 McClain aluminum trailer and 2021 Suzuki engine. This boat is custom made for the shallow bays If you are looking for a great Bay Boat for fishing in the shallows this 2020 Custom Bay 16 is the right vessel for you. She comes with 3 coolers, casting deck, power pole and a jack plate that will allow you get into those great shallow spots with her 7 inch draft. There are many different storage compartments that are easily accessed and very clean. She has a 90 HP Suzuki engine that is efficient and will get you to your favorite spot quickly. If you are looking for a well-maintained used Bay Boat, this is the boat for you. Reason for selling is too many boats.

2007 Custom 16

2007 Custom 16

$97,000

Kansas City, Kansas

Year 2007

Make Custom

Model 16

Category Other

Length 16

Posted 1 Month Ago

Very light use and a complete rare design for fun on the water. This is normally stored inside when not in use or enjoyed on fresh water. Completely gone through in 2018 by a former Chris-Craft builder. Stock #176116 The Little Leon is a scale replica of the Square Sail Brigantine "Leon". She was entirely hand built from scratch. A complete one of a kind! Exact 1/8th scale of the famed square rigged Norwegian Brigantine "Leon". Only continue looking if interested in a conversation starter that will turn heads every where it's sailed and docked. A unique hand-made design which is also able to be disassembled and trailered on the included trailer. Seating for 6-8 people enjoy a fantastic sail and steady ride thanks to the onboard water ballast system. The hull sides are Australian hardwood with masts made of American Pine. MAST: Two masts made of pine wood. MAST STEP: The fore mast is stepped on the forward ballast bulkhead. The aft mast is stepped in the bilge SPREADERS: Four spreaders on the fore mast. SHROUDS AND STAYS: The forward mast has eight shrouds both port and starboard, all made of nylon rope. Five are 1/4", one is 3/16", one is 5/32", and one is 3/32". The aft mast has six shrouds on each side, all nylon rope. There are four 1/4", one 5/32", and one 3/32". The foremast also has a total of six upper shrouds. The fore stays are attached to the bowsprit. The back stay of the forward mast is attached to the aft mast. BOOMS: There is a bowsprit and a bow boom. TURNBUCKLES: There are no turnbuckles rather dead-eyes. CHAIN PLATES: The chain plates are Futtlocks. They are 1/8" bronze rods attached to the topsides then attached to the dead-eyes. MAST SUPPORTERS: Hardwood mast partner and mast step, reported as serviceable. SAILS MAINSAIL: There are four square sails on the forward mast. Three stay sails (jibs). There are gaff rigged sails on the aft mast.

2007 Custom 1938 Triple Up Chris-Craft Replica

2007 Custom 1938 Triple Up Chris-Craft Replica

$199,900

Fish Haven, Idaho

Category Antique And Classic

Length 30

Posted 1 Month Ago

I have not seen this boat personally . All of the information in this listing, including all photos, were provided by the seller. This boat is said to be in excellent condition inside as well as outside. It is sitting in enclosed storage at this time. Stock #199699 Beautiful handcrafted reproduction of a 1938 Chris-Craft Triple Cockpit with Up-swept Deck! Mahogany traditional plank topsides & decking! This is a custom built, 2007 reproduction of a 1938 Chris-Craft Triple Cockpit with Up-swept Deck. This boat was built by Scott Stevenson w/ retro Nautique. He is a well known builder of these types of boats and is known for his quality and craftsmanship. The boat has only been in the freshwater mountain lakes in Utah. Powered by a Mercruiser Horizon 8.1 liter, 370 hp engine with closed, freshwater cooling system, this boat will get you where you want to go fast. - This boat was built with a triple layer bottom of two plywood layers followed by 5/8" Mahogany planking. - Topsides and Decking have 5/8" Mahogany traditional plank on frame construction. - All planking and framing attached with 3M 5200 adhesive and silicon bronze screw and bolts. - White Oak chines, keel, battens and decking beams. Some of the other features this boat has are: - Aqua Marine leather upholstery - Chromed bronze hardware & stainless steel rub rails - Hydraulic steering - Digital DTS Mercruiser instruments and throttle - Bow thruster - Bimini top and soft lined storage cover. - Swim step - Black canvas buggy style top - Soft lined storage cover - 2 each 50 gallon fuel tanks - Buell air horns The seller also states that this boat is mechanically good to go. It needs nothing that he is aware of. For those buyers that know the antique Chris-Crafts and even StanCraft Boats, then you will know exactly what this boat is. This is a Custom made, handcrafted boat that was built with the finest materials that are made to last. If you are looking for this kind of boat and don't want to spend $500,000+ for one, you need to see this one. You won't be disappointed! This one is as advertised. Reason for selling is moving on to another style of boat..

2008 Custom Windward 28

2008 Custom Windward 28

$19,900

Middleburg, Florida

Year 2008

Make Custom

Model Windward 28

Category Ketch

Length 28

Posted 1 Month Ago

Everything about this boat appears to be in " better than expected" condition. She has been well cared for and the boat and all of its accessories/components have been stored in a clean, climate-controlled environment. Stock #311714 Karl Stambaugh Design!! Easy to Haul!! Easy to Sail!! Everything Needed to Go Sailing is Included!! BONUS OFFERING!!! The owner of this boat had dozens of books on sailing and sailboat maintenance. Those will be included in the sale of this vessel. This Karl Stambaugh-designed WINDWARD 28 is a cruising version of her successful shallow draft sisters. She is a gaff-rigged ketch and she has generous accommodations in her cabin. Her arrangement is a V-berth forward, galley to port, storage to starboard, two settees, and a porta-potty to pull out from under the bridge deck. Her self-bailing cockpit is large enough for family and friends to spread out. Storage is provided in the lazaret and under the cockpit seats. When not under sail she is powered by a 2006 Tohatsu 6 HP four-stroke engine. She will sail upright and go to windward well as her name indicates. The split ketch gaff rig is easy to handle and reduces easily when white caps appear. Her hull construction is glue and screw 1/2" plywood and epoxy on plywood bulkheads and straight frames. Her sails are in good condition and she comes with all running rigging and the original build plans. She rides on a 2008 aluminum dual axle trailer made by Advanced Boat Trailers of Jacksonville, FL and custom-made for this boat. Since new, when not in the water, this boat has been stored in a climate-controlled inside storage building built specifically for this boat. Bottom line...the owner of this boat had her custom built and he loved her and cared for her like an only child. Check her out!! You will be amazed and impressed!! Reason for selling is owner passed.

1977 Custom 44

1977 Custom 44

$80,000

Cut Off, Louisiana

Year 1977

Make Custom

Model 44

Category Dive Boat

Length 44

Posted 1 Month Ago

The boat has normal wear and tear. Could use a good cleaning on board. Per the Seller: New paint, rewired, one engine rebuilt in 2017. One engine is the original but still runs like a top The owner said he would repaint deck if need be. Boat built by the owner of a shipyard and is built like a tank. Stock #182603 44' Cabincruiser/Diveboat, competely redone, rewired, repainted, over the last 4 years. Built to commercial shipping standards! Motivated seller. Boat is located in Cutoff, Louisiana and was custom built by a shipyard owner for his personal use.This boat is built like a tank and ready for offshore diving and fishing. SELLER SAYS HE WILL DELIVER THE BOAT FREE OF CHARGE ANYWHERE ON THE GULF COAST. HE WILL DELIVER UP THE EAST COAST FOR THE COST OF FUEL. She was completely restored with new wiring, repainted top side and new bottom paint. She holds 600 gallons of fuel and has a Perkins 6.5kw generator for overnight trips. She has a lower outside deck with a fold down transom door with an attached custom made folding ladder for easy in and out for all your diving equipment. Reason for selling is wants a bigger day boat.

2013 Custom 28

2013 Custom 28

$19,999

Piedmont, Oklahoma

Year 2013

Make Custom

Model 28

Category Cuddy Cabins

Length 28

Posted 1 Month Ago

A true gem built from scratch and has traveled around for boating pleasure. Hull is super clean, cabin is spotless, extremely well maintained. Twin Mercury Optimax 150 Outboards give her plenty of power, she tops out at 35 MPH. Closed helm's area with pop hatches to stand up in if needed. All other windows are sliders. Stock #083101 Unique And Handcrafted! Low Hours! 2013 Custom 28 built with painstaking energy and an attention to detail like none other. Owner will never get the time back, but hopes the next owner will appreciate what he has completed. Framing is made out of White Oak, with layers of plywood and mahogany. Hull is done with layers of Mahogany while cabin is solid mahogany. A true one of a kind vessel, head turner is an understatement. Perfect for the day trip or the weekend getaway, outfitted with a bunk for 2, galley and Rarity head. You truly cannot put a price on the amount of work and effort that went into this excellent vessel. Enjoy the pictures, starts with the frames and shows several steps along the way with over 16 layers of clear coat bringing her to life. Reason for selling is time to let others enjoy all the hard work..

1983 Custom Willy Roberts

1983 Custom Willy Roberts

$20,750

Coral Gables, Florida

Year 1983

Make Custom

Model Willy Roberts

Category Flats Boats

Length 19

Posted 1 Month Ago

The boat is in very good condition. The seller is said to rarely use the boat since it was re-done (New engine and fiberglass work). The boat has very little and barely noticeable gel coat imperfections and appear to be cosmetic only. There are no noticeable gel coat or spider cracks observed. The bottom paint appeared to be in very good condition. The motor and lower unit really looks spotless. Inside of the engine there are no signs of rust or oxidation. Everything appears to be in good condition. The propeller has no noticeable imperfections. The trim tabs, Engine tilt and trim and all other electronics were observably working. The motor is equipped with a Hydrofoil stabilizer for maximum performance. Stock #222073 Excellent Condition. ideal for shallows and fishing with plenty of room for other activities. Reproduction Willy Roberts. The 1983 Willy-Roberts Skiff Project dream boat is built with the bones of the Florida Keys 1960s flats boats era in mind. Fishing in the historic back country of The Florida Keys was never complete without a Willy Roberts Skiff Boat. Willy Roberts boats are known for having lots of wood trim and accents and some are completely decked out in it. Modern touches to this boat however, include hydraulic steering, GPS, Lenco Trim Tabs, and a 70-HP Yamaha engine, and off-course coats of gel coat in the exterior for maximum protection from the saltwater elements. YAMAHA's newly released F70 four-stroke marks a further continuation in the evolution of light, powerful and fuel-efficient outboards. The inline four cylinder F70 is said to be an enhancement popular F60. The F70 shares the same displacement (996cc) and is only marginally heavier (10kg) than the F60. There is a significant difference between the F70 and its predecessor the F60. Unlike other 16 valve engines, the F70 operates via by a single, not dual, overhead camshaft. This gives it a weight advantage over its competitors in the 70-75hp class and also increases performance. With this in mind, This Yamaha engine powering this unique and relatively custom boat, creates a top maximum speed of 40 MPH with a cruising speed of 30 MPH and only an average fuel consumption of 4 miles per gallon at its cruise speed. This remarkable machine is uniquely built for the treasures Back Country of the Florida Keys and all of what the Flats fishing has to offer. This is a one of a kind custom made replica or a reproduction of a Willy Roberts Reason for selling is financial reasons.

1973 Custom 81 Long Range Trawler

1973 Custom 81 Long Range Trawler

$1,075,000

Saint-Georges-sur-l'Aa, Hauts-de-France

Year 1973

Make Custom

Model 81 Long Range Trawler

Category Trawlers

Length 81

Posted 1 Month Ago

According to the seller, this unit is in very good condition and in turnkey condition to go anywhere in the world. We encourage all inquiries and questions relating to its present condition, the accuracy of details including but not limited to its location, engine hours, service history, listing status and features. Stock #329297 Excellent long range expedition trawler that has been completely refit in the last few years as a best in class expedition type trawler! This one-of-a-kind vessel was originally a high-seas commercial trawler launched in 1973. She was purchased by the current owner as an empty hull with integrated fuel tanks but without deck, superstructure or machinery. Starting with an excellent hull as a blank slate, the current owner undertook a very thorough, 100% keel-up refit, which was substantially completed in 2010 with additional hull and system enhancements made continuously through 2022. Accommodations are extensive and she is presently fully equipped for a party of 8 with room for expanded berthing. -Owner's Stateroom abaft wheelhouse with bath ensuite -Fully equipped ship's office -2 single and 2 double cabins with direct deck access and 2 shared head/showers on main deck -All upper accommodations, wheelhouse, office and salon/galley are air-conditioned via a Carrier multi-split inverter system new 2018 -2 large workshops below decks with mig/tig/stick welders, plasma cutter, lathe/milling machine, hydraulic press etc. -Dining area for 8 -2 entertainment centres in master stateroom and salon with: smart TVs, DVD/VCR/ BluRay She currently has 50,000 liters of fuel on board with additional fuel capacity that will give her an 18,000 nautical mile range. She is constructed of Naval grade steel with 12.5 mm garboards, 25 mm keel, otherwise 10 mm naval grade steel (A131) with new 6 mm alloy superstructure. She has a new deck of 6MM naval steel laid in 2004. All new machinery, electrics/electronics, plumbing, anchors/chain, windlass, bulbous bow and furnishings followed soon thereafter. In order to reduce future maintenance, the following stainless-steel elements were incorporated: bulwark stanchions, hawse pipes, caprail supports and electrically isolated deck/superstructure interface. For stability, she has bilge keels on both sides, with the Portside bilge keel added in May 2022. Her main engine is phenomenal! -Baudouin V12P15 430hp@1,800 RPM driving 5:1 -Baudouin marine gear with Baudouin oil-lubricated tunnel and Baudouin 4 bladed propeller. -Entire system has 1,165 hours since 100% overhaul using only factory spares. The following are the maintenance intervals recommended by the manufacturer: -Factory recommended first top-overhaul if required: 16,000 hours -Factory recommended bottom-end revision: 24,000 hours -Factory recommended complete overhaul: 36,000 hours -She is fit with a stainless wet exhaust with unlimited dry-running capability Generators: -Generator #1: Perkins 4.236 driven 40 KW 3 phase 220/110 VAC Solesco generator, 1,467 hours since new. Stainless wet exhaust with indefinite dry-run capability -Generator #2: Kubota 19 KW split phase 220/110 VAC 101 hours since overhaul. Stainless wet exhaust with indefinite dry-run capability -Generator #3: (night genset in forepeak) Phasor 11 KVA split phase 220/110 VAC, 1,643 hours since new WATERMAKER: 280 litres per hour watermaker with (4) (2.5 X 40) new membranes installed 12/2022. She was used in commercial driving and hull cleaning operations and has a 3 phase generator onboard to run 3 phase hull-cleaning machines. It still runs the hydraulic windlass and thruster. There is a big Ingersoll Rand 200 bar diving compressor and a Bauer Capitano diving compressor back-up. And much more..Contact this broker for more information and a full inventory of the vessel. Reason for selling is sellers are downsizing.

1989 Custom Carolina Lewis Brothers 38

1989 Custom Carolina Lewis Brothers 38

$155,000

St. Petersburg, Florida

Year 1989

Make Custom Carolina

Model Lewis Brothers 38

Category Sportfish/Convertibles

Length 38

Posted 2 Weeks Ago

Hull is wood sheathed in fiberglass. Appears to be in excellent condition structurally. The seller has put a lot of work into the boat including all new windows and a lot of paint and updated upholstery - while there are still a few areas of the boat that will need some paint and touch up this boat is so solid and so impressive that it's worth the time to put in to make this one even better than it is. Bottom was painted in 2023 All dimensions are estimates based on rough measurements. Any buyer should conduct so diligence at inspection to verify any and all important measurements Seller rebuilt engine himself in 2020. He has some receipts and information on parts. There is no existing warranty on the parts or labor Stock #375979 Carolina Custom 38 many renovations completed, maintained with an open checkbook This 1989 Lewis Brothers custom Carolina sport fishing boat is extremely rare and very Stout. Hand built on Harkers Island in North Carolina by the famed Lewis Brothers with plank on wood frame construction, completely sheathed in fiberglass the hull on this boat is solid and strong. Much stronger than a boat made of fiberglass alone. During covid 19 seller rebuilt the 375hp 3208 Caterpillar engine himself with the help of a certified mechanic. Approximately 100 hours on it since the rebuilt, this one runs plenty strong. Clean simple layout inside this boat would be great for a dive operation, a charter fishing boat or even one of the most unique and prestigious family fishing boats you could buy The seller did a lot of work on the boat including all new windows and reupholstering the seats. Boat is equipped with a 8 KW Onan generator Bridge is equipped with a clean layout that includes Furuno TZ Touch 2, VHF Radio, compass and gauge package Reason for selling is downsizing.

2005 Custom Built Norwalk Islands Sharpie 31

2005 Custom Built Norwalk Islands Sharpie 31

$20,000

Pepin, Wisconsin

Category Ketch

Length 31

Posted 1 Month Ago

This is a beautiful freshwater vessel, you can tell the owners have loved her. The owner states that all systems, electronics and mechanics work as they should. Get ready to set sail. Adventure Awaits. Stock #299481 Beautiful 2005 CUSTOM-BUILT NORWALK ISLANDS SHARPIE 31' ketch! The Monkey's Fist is a 31' Norwalk Islands cruising ketch designed by marine architect Bruce Kirby and built by the Erickson Brothers. Launched in 2005 on Lake Pepin, she is a joy to sail and a thing of beauty. This vessel features a cold molded hull comprised of laminations of Western Red Cedar and Philippine Mahogany bonded with epoxy and skinned with fiberglass cloth infused with epoxy which combines the strength and flexibility of wood with the easy maintenance of fiberglass. Hollow Douglas Fir masts and spars finished bright with marine varnish. Dacron sails in Egyptian cotton tint made by UK Sails of Chicago including a mainsail, mizzen sail, working jib, storm jib, and a genoa. Bronze port lights, winches, cleats, and roller car tracks. A 9.9 HP Yamaha 4-stroke engine sits in an enclosed lazarette installed on a crane that allows the motor to be lifted form the water when sailing. With the centerboard up she draws less than 2 feet of water, but due to the 2500 lb keel shoe, she is self-righting. Gimbaled, stainless steel propane stove top and oven in the galley, and a propane grill for outdoor cooking. Propane tanks are located in their separate vented locker outside of the cabin. The boat has a 40-gallon freshwater capacity with a sink and a faucet in both the galley and the head which includes a self-composting toilet. Naturally finished woods thoughout include walnut, maple, Phillipine mahogany, Douglas Fir, Osage Orange and cedar. Sleeps 5 persons comfortably. The original building plans are included with the boat. Only sailed in freshwater

2014 Custom Made 11 foot

2014 Custom Made 11 foot

$2,800

Morehead City, North Carolina

Year 2014

Make Custom Made

Model 11 Foot

Category Dinghies

Length 12'

Posted Over 1 Month

2014 Custom Made 11 foot A 2014 12 foot custom made dingy. This boat has been in the water 6 times and for all purposes is new. Comes with a LoadRite trailer and a 850$ full cover. This boat was designed for a 6HP engine and Starling has one available if an engine is required.

1986 Custom-Made Cruising Sloop

1986 Custom-Made Cruising Sloop

$270,000

Fort Lauderdale, Florida

Year 1986

Make Custom-Made

Model Cruising Sloop

Category Sloop Sailboats

Length 57'

Posted Over 1 Month

1986 Custom-Made Cruising Sloop A unique boat with a great history including a profitable charter business in the Caribbean paradise of the San Blas Island group off Panama. With 3 Cabins and a maximum capacity of 12 passengers she allows luxury sailing in combination with a unique lifestyle. For Sale because owner has to give up business for family reasons.  Great opportunity. Price is open for negotiation

ON-SHORE BOAT TRACK SYSTEM

ON-SHORE BOAT TRACK SYSTEM

$1,200

Three Lakes, Wisconsin

Year 2005

Make CUSTOM MADE

Model -

Category -

Length -

Posted Over 1 Month

This track system has been used for my 18' Ranger boat for about 10 years. The 4 10-foot track sections are steel and the steel boat carriage has adjustable keel cradle and stainless steel wheel bearings. There are 40 feet of track and more can be made by any steel fabricator. The winch was hit by lightening and the motor needs to be repaired or replaced. There is also a manual winch that can be used in place of the electric winch.The system is on shore at my summer home and can be seen down by the lakefront on the Eagle River Chain of Lakes at Three Lakes,Wisconsin. Removal and transportation has to be handled by the buyer. This is a very effective system and can be adapted for a boathouse or on shore. Call me for more information or questions.

2006 Custom-Made Steel Cruising Cutter

2006 Custom-Made Steel Cruising Cutter

$283,864

Fort Lauderdale, Florida

Year 2006

Make Custom-Made

Model Steel Cruising Cutter

Category Sailboats

Length 47'

Posted Over 1 Month

2006 Custom-Made Steel Cruising Cutter This vessel is a great  ocean going cruising yacht. She is exceptional in almost all areas. The attention to detail, quality of build and standard of equipping in terms of reliability and safety are close to unique. Clearly the owners experience and knowledge as a professional seamen and engineer are the major factors distinguishing this custom built yacht.

2006 Custom-Made Cruising Cutter

2006 Custom-Made Cruising Cutter

$284,382

Fort Lauderdale, Florida

Year 2006

Make Custom-Made

Model Cruising Cutter

Category Sailboats

Length 47'

Posted Over 1 Month

2006 Custom-Made Cruising Cutter This vessel is a great  ocean going cruising yacht. She is exceptional in almost all areas. The attention to detail, quality of build and standard of equipping in terms of reliability and safety are close to unique. Clearly the owners experience and knowledge as a professional seamen and engineer are the major factors distinguishing this custom built yacht.