Douglas Boats for sale

1-15 of 117

Sort By

Skater 24 Diamond Marine Mercury 280 Cleaver Aluminum Trailer Livorsi Catamaran

Skater 24 Diamond Marine Mercury 280 Cleaver Aluminum Trailer Livorsi Catamaran

$56,999

Hollywood, Florida

Year 1989

Make Douglas Marine

Model Skater

Category Catamarans

Length 24.0

Posted Over 1 Month

Selling my 1989 24' Skater cat. Comes with custom built 2014 Allstar Aluminum Trailer with torsion axles, brakes, custom wheels, and all LED lights. Trailer has a 5 year warranty. Motors were rebuilt at Diamond Marine last year with new top pinned Pistons, rings, beatings, custom tuners and porting, and the ECU was flashed to ROS specs by Simon Motorsports. Engines had 130-140 original hours prior to rebuilds and have approximately 20 hours now. Very clean engines and boat! 4 JL Audio 8.8's and two 10" JL subs, JL Amps, all installed by JL Audio Factory Employee. Full Sunbrella cover with suede on inside, Livorsi gauges and Livorsi throttles, LED nav lights. Blue led lights in the cockpit and white in the bilge. Racing hatch in the rear can hold a large cooler out of the way of passengers. Sportmaster lower units 20" and offshore midsections. Cleaver 3 blade props recently balanced and polished by Frank and Jimmie's in Fort Lauderdale. Latham steering with dual rams and wing plates. Boat has the throttles in the center so you can drive it using two people or just one. Trim switches wired to both sides for driver and throttleman. Boat has a tunnel tab that also has switches wored to both sides. Comes turn-key with props, hubs, etc. and will run 110mph as it sits. With more setup you could probably see 117-120mph. I have only run Aviation Fuel/Recreational (Non-Ethanol) fuel in this boat, so there are no Ethanol issues whatsoever. Boat has two fuel tanks, one on each side that hold approx 50 gallons each. If you don't know the history of Skater boats, check them out on YouTube or Google. These are world champion offshore powerboats, and this size (24ft) hasn't been made since the 90's so they are hard to come by. The engines were rebuilt by the best on the business (Marty and Joe Signorelli) and they are the only ones that have ever cracked them open. The engines started their life in freshwater and over the course of 14 years only had 140hrs put on them. These are pure race engines built to run at high rpm's for long distances, and these are also no longer produced by Mercury Marine so a nice pair like these are very rare. Skater spectre liberator eliminator action marine amt motion extreme xtreme Donzi cigarette Doug wright

24' douglas skater

24' douglas skater

$51,000

Coral Gables, Florida

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

totally restored 24' douglas skater custom windscreen, electric seats,twin  racing 2.5's must  see to appreciate.

SKATER 32  OUTBOARD BY DOUGLAS MARINE , KEVLAR / VINYL-ESTER LAYUP , RESTORED,

SKATER 32 OUTBOARD BY DOUGLAS MARINE , KEVLAR / VINYL-ESTER LAYUP , RESTORED,

$38,000

Voorhees, New Jersey

Year 1988

Make SKATER

Model 32 A

Category Catamarans

Length 32.0

Posted Over 1 Month

UP FOR SALE TO GOOD A HOME ONLY !!! 1988 DOUGLAS MARINE SKATER 32 OUTBOARD MODEL ( ENGINES NOT INCLUDED ) WITH VERY NICE TRIPLE AXLE SKATER TRAILER WITH ZERO RUST . THE SKATER HAD A 20 K PAINT JOB WITH CUSTOM AIRBRUSHING BY KILLER CREATIONS ( ONE THE BEST , WELL KNOWN ) BOAT IS BASED OUT IN YELLOW, THE GREEN IS CAMARO SYNERGY GREEN AND BENZ SILVER , ALL TO QUALITY DEBEER PAINT .GRAPHICS CARRIED OVER ONTO UNDERSIDE OF HATCH DOORS . BOAT HAS BEEN STORED INSIDE WITH COVER , NEEDS TO BE CLEARED . YOU GET LIKE NEW HULL , ALL NEW NEVER USED LIVORSI GAUGES , LATHAM THROTTLES , HAS OLD HYD HELM , INCLUDES NEW CLASSIC STAINLESS RUBRAIL THAT HAS BEEN FITTED PRIOR TO PAINT , NO EXPENSE SPARED , CUSTOM ONE OFF FIBERGLASS CONSOLE WITH FIBERGLASS SHIFTER ARCH , CUSTOM ONE OFF HATCH COST 4 K ALONE . SALE INCLUDES POP UP CLEATS AS WELL AS NEW ENGINE HARNESSES AND USED HYD LINES . BASICALLY CLEAR BOAT , BOLT ON POWER AND YOUR DONE . TRAILER HAS ONE OFF CUSTOM LADDER AND HAS BEEN SANDBLASTED , SUPER SOLID , THREE NEW ZERO MILES TORSION AXLES WITH CUSTOM RIMS AND LOAD RANGE E TRAILER TIRES WITH ZERO MILES . COMES WITH ORIG SKATER SEATS AS WELL AS THREE MAN REAR SEAT CUT DOWN FROM A 40 SKATER . AS FAR AS INTERIOR GOES INSTALL NEWER STYLE FRONT SEATS AND RECOVER BACK AND ITS DONE CALL BEFORE PURCHASE OR CONCERNS 609-315 TWO SIX FOUR ZERO

2005 Custom Built Norwalk Islands Sharpie 31

2005 Custom Built Norwalk Islands Sharpie 31

$20,000

Pepin, Wisconsin

Category Ketch

Length 31

Posted 1 Month Ago

This is a beautiful freshwater vessel, you can tell the owners have loved her. The owner states that all systems, electronics and mechanics work as they should. Get ready to set sail. Adventure Awaits. Stock #299481 ***SALE PENDING*** Beautiful 2005 CUSTOM-BUILT NORWALK ISLANDS SHARPIE 31' ketch! The Monkey's Fist is a 31' Norwalk Islands cruising ketch designed by marine architect Bruce Kirby and built by the Erickson Brothers. Launched in 2005 on Lake Pepin, she is a joy to sail and a thing of beauty. This vessel features a cold molded hull comprised of laminations of Western Red Cedar and Philippine Mahogany bonded with epoxy and skinned with fiberglass cloth infused with epoxy which combines the strength and flexibility of wood with the easy maintenance of fiberglass. Hollow Douglas Fir masts and spars finished bright with marine varnish. Dacron sails in Egyptian cotton tint made by UK Sails of Chicago including a mainsail, mizzen sail, working jib, storm jib, and a genoa. Bronze port lights, winches, cleats, and roller car tracks. A 9.9 HP Yamaha 4-stroke engine sits in an enclosed lazarette installed on a crane that allows the motor to be lifted form the water when sailing. With the centerboard up she draws less than 2 feet of water, but due to the 2500 lb keel shoe, she is self-righting. Gimbaled, stainless steel propane stove top and oven in the galley, and a propane grill for outdoor cooking. Propane tanks are located in their separate vented locker outside of the cabin. The boat has a 40-gallon freshwater capacity with a sink and a faucet in both the galley and the head which includes a self-composting toilet. Naturally finished woods thoughout include walnut, maple, Phillipine mahogany, Douglas Fir, Osage Orange and cedar. Sleeps 5 persons comfortably. The original building plans are included with the boat. Only sailed in freshwater

1976 Custom Built 50' Yawl

1976 Custom Built 50' Yawl

$100,000

Morro Bay, California

Year 1976

Make Custom Built

Model 50' Yawl

Category Yawl

Length 50

Posted 1 Month Ago

Per the seller, the hull is old-growth Douglas Fir with steam-bent oak ribs and sealed over with fiberglass. She is super watertight other than the normal slow accumulation from the prop. Block and tackle are handmade of bronze shivs and locust wood... a few are Douglas Fir. Hand-shaped mast and hardware... Custom bulwarks and bowsprit.. The masts measure up to 40' and the sails are canvas. The rigging was replaced in 2021. Stock #276005 Very Unique ONE-of-a-kind, hand-built replica of the "Spray" famously first singlehanded circumnavigation of the globe by Joshua Slocum in 1895-1898. Located in Morro Bay, California - This Nautical classic is truly one of a kind. Built as a Replica of the world-famous vessel the " Spray" - which was famously, the first single-handled, circumnavigation of the globe by Joshua Slocum in 1895-1898. Back in the good ol' days of Celestial Navigation. ---KEY FEATURES / VESSEL OVERVIEW--- The interior floor plan is pretty basic. In the fore cabin, there is a small galley and sitting area attached to the master bunk. She has a small office in the foredeck with a fish hold between the Port and Starboard cabins. There is a small head in the aft cabin. She's powered by a Perkins 4-108 and carries 200 gallons of fuel. This beauty was built over a ten-year period by local Los Osos shipwright Bob White and finished in 1976. The seller believes she sailed to Hawaii and around the channel islands. Per the seller, she glides on the water and sails like a dream.

1976 Custom Built 50' Yawl

1976 Custom Built 50' Yawl

$100,000

Morro Bay, California

Year 1976

Make Custom Built

Model 50' Yawl

Category Yawl

Length 50

Posted 1 Month Ago

Per the seller, the hull is old-growth Douglas Fir with steam-bent oak ribs and sealed over with fiberglass. She is super watertight other than the normal slow accumulation from the prop. Block and tackle are handmade of bronze shivs and locust wood... a few are Douglas Fir. Hand-shaped mast and hardware... Custom bulwarks and bowsprit.. The masts measure up to 40' and the sails are canvas. The rigging was replaced in 2021. Stock #276005 Very Unique ONE-of-a-kind, hand-built replica of the "Spray" famously first singlehanded circumnavigation of the globe by Joshua Slocum in 1895-1898. Located in Morro Bay, California - This Nautical classic is truly one of a kind. Built as a Replica of the world-famous vessel the " Spray" - which was famously, the first single-handled, circumnavigation of the globe by Joshua Slocum in 1895-1898. Back in the good ol' days of Celestial Navigation. ---KEY FEATURES / VESSEL OVERVIEW--- The interior floor plan is pretty basic. In the fore cabin, there is a small galley and sitting area attached to the master bunk. She has a small office in the foredeck with a fish hold between the Port and Starboard cabins. There is a small head in the aft cabin. She's powered by a Perkins 4-108 and carries 200 gallons of fuel. This beauty was built over a ten-year period by local Los Osos shipwright Bob White and finished in 1976. The seller believes she sailed to Hawaii and around the channel islands. Per the seller, she glides on the water and sails like a dream.

1992 Magnum

1992 Magnum

$20,000

Long Beach, California

Year 1992

Make -

Model -

Category Express Cruiser Boats

Length 40'

Posted Over 1 Month

1992 Magnum Military spec project by McDonnell-Douglas.

18' Flying Scot sailboat, like new sails, and trailer.

18' Flying Scot sailboat, like new sails, and trailer.

$1,700

Charlotte, North Carolina

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

Gordon Douglas flying scot.

1990 Morgan Catalina 50

1990 Morgan Catalina 50

$115,000

Miami, Florida

Year 1990

Make Morgan

Model Catalina 50

Category Daysailer Sailboats

Length 50'

Posted Over 1 Month

1990 Morgan Catalina 50 50 1990 MORGAN CATALINA BOTTOM DONE 12/23/17 NEW 5K DIESEL GENERATOR 2 GOOD SAILS SLEEPS 8 3 CABINS 2 HEADS AND SHOWER ROOM 60HP YANMAR DIESEL RUNS GREAT 2000 HRS PROP TUNED AND POLISHED 3 NEW LED TVS ONE WITH BUILT IN DVD 12V OR 110 FRIDGE FREEZER 11' FIBERGLASS BOTTOM INFLATABLE DINGHY MAPI.   FINANCING AVAILABLE!!!   Frank Butler and Gerry Douglas have teamed up again to bring us another new Catalina. At 50 feet, this new model is definitely the queen of the fleet. The target was obviously to combine comfort with good speed.  The Morgan/Catalina 50 with its great performance and its large and comfortable layout make her a very desirable cruiser    This three cabin layout with two heads and crews quarters in the fo'c'sle (currently used for storage) make her very accommodating. Her interior good looks are achieved by warm vanished mahogany and corian.

2000 Catalina 42

2000 Catalina 42

$105,000

St. Petersburg, Florida

Year 2000

Make Catalina

Model 42

Category Racer Boats

Length 42'

Posted Over 1 Month

2000 Catalina 42 Wind Horse layout is a Catalina 42 MKll 2 cabin Pullman owners berth. Want to go off shore cruising? This is the boat for you! The Catalina 42 MKll is one of the most successful 40 plus footers ever built the number is over 1000. Catalina's in-house design team, led by chief designer Gerry Douglas for the last 25 years, designed the Catalina 42. Introduced with the 1989 model year, the 42 was the first American built sailboat of this size to offer a three-stateroom layout. The Mk I version was built until February 1995 (hull # 477) when it was replaced with the Mk II version which remains in production as of the 2004 model year. There were very few changes between the Mk I and Mk II models although, as a concession to popular European styling, the transom was rounded off at the deck. In addition, storage was added to the cockpit seating and a two-stateroom layout option was offered. The construction of the Catalina 42. The hull is constructed of a solid laminate of fiberglass and resin with no core materials. The hull is fitted with a structural fiberglass liner that incorporates the cabin sole as well as berth and furniture foundations. The deck is a cored composite with fiberglass and 3/4" end grain balsa wood. Where deck hardware is installed and 1/2" plywood is used instead of balsa wood. The deck and hull are joined in a shoebox fashion flexible adhesives and stainless steel nuts, bolts and washers on eight-inch centers. There is an aluminum rub rail with vinyl insert fastened at the deck to hull joint with stainless steel screws.Wind Horse has all new electronics. Main sail has a batt car slider track and folds down into a Doyle Stack Pac. Cockpit has three electric winches and all lines lead to the cockpit for easy sail handling.Aft Mounted are solar panels and a wind generator for extended power charging along with extra propane tanks. The prop, auto self folding/reversingThis Catalina 42 is ready to go cruising the world.

2000 Catalina 42 MkII

2000 Catalina 42 MkII

$105,000

St. Petersburg, Florida

Year 2000

Make Catalina

Model 42 MkII

Category Racer Boats

Length 42'

Posted Over 1 Month

2000 Catalina 42 MkII Wind Horse layout is a 2 cabin Pullman owners berth The Catalina 42 is one of the most successful 40 plus footers ever built. Catalina's in-house design team, led by chief designer Gerry Douglas for the last 25 years, designed the Catalina 42. Introduced with the 1989 model year, the 42 was the first American built sailboat of this size to offer a three-stateroom layout. The Mk I version was built until February 1995 (hull # 477) when it was replaced with the Mk II version which remains in production as of the 2004 model year. There were very few changes between the Mk I and Mk II models although, as a concession to popular European styling, the transom was rounded off at the deck. In addition, storage was added to the cockpit seating and a two-stateroom layout option was offered. The construction of the Catalina 42. The hull is constructed of a solid laminate of fiberglass and resin with no core materials. The hull is fitted with a structural fiberglass liner that incorporates the cabin sole as well as berth and furniture foundations. The deck is a cored composite with fiberglass and 3/4" end grain balsa wood. Where deck hardware is installed and 1/2" plywood is used instead of balsa wood. The deck and hull are joined in a shoebox fashion flexible adhesives and stainless steel nuts, bolts and washers on eight-inch centers. There is an aluminum rub rail with vinyl insert fastened at the deck to hull joint with stainless steel screws.Wind Horse has all new electronics. Main sail has a batt car slider track and folds down into a Doyle Stack Pac. Cockpit has three electric winches and all lines lead to the cockpit for easy sail handling.Aft Mounted are solar panel and a wind generator for extended power charging along with extra propane tanks. The prop, auto self folding/reversingThis Catalina 42 is ready to go cruising the world.

1996 Silverton 362 Sedan Bridge

1996 Silverton 362 Sedan Bridge

$54,500

Palm City, Florida

Year 1996

Make Silverton

Model 362

Category -

Length 36.0

Posted Over 1 Month

1996 Silverton 362 Sedan Bridge,1996 Silverton 362 Sedan Bridge in excellent condition with twin 454 crusaders 1200 hours. 250 hours since rebuild. Full detail with haul out and 2 coats bottom paint July 2016.Oil change and new impellers August 2016. Perfect family boat with 2 state rooms ,separate head and separate shower. Dinette that seats 6 and folds down to accommodate 2 more adults, with beautiful 360 view of your surroundings.New Hunter Douglas window treatments (September 2016) Flying bridge also seats 6 comfortably. Never be alone while at the helm.Must See $54,500

1932 Alden Sloop/Cutter

1932 Alden Sloop/Cutter

$125,000

Dania Beach, Florida

Year 1932

Make Alden

Model Sloop/Cutter

Category Classics

Length 45'

Posted Over 1 Month

1932 Alden Sloop/Cutter One of John Alden's finest designs was the Sloop-Cutter Design No. 531, for Mr. Ralph Forbes, of Boston, MA.   In 1932, Mr. Ralph E. Forbes of Boston, MA, commissioned the renown George Lawley and Sons to build S/Y Lark.  Ralph Emerson Forbes was the son of William Hathaway Forbes and Edith Emerson (daughter of Ralph Waldo Emerson).  The Forbes spent many years of memorable sailing with their family and notable guests out of Naushon Island.  This is a two owner yacht that has been sailed by the Forbes family for 50 years.  She is very capable at sea, racing and entertaining guests.  In 1972, Captain Eric Little (a master shipwright), purchased the S/Y Lark, sailing her every summer in the Elizabeth Islands, Martha's Vineyard, Nantucket, and cruising Cape Cod.  During the winters, Captain Little completed restorations including replacing a majority of the frames, floors, and planking.  George Lawley and Sons built hundreds of ships and yachts, most notably the yachts Puritan and Mayflower respective winners of the 1885 and 1886, America's Cup (and the fine sloop Lark). Principal Dimensions                  Imp.        Metric Length on Deck                          44' 4"          13.51 Designed Waterline Length          29' 6"            8'99 Beam                                          10'9"           3..28 Displacement:lbs/kg                 20,900           9,480 Frames:  White Oak 2 1/4" X 2", fastenings of bronze. Planks: Carvel on Frame with Mahogany Planking 1 1/4". Deck Planks:  4/4 Douglas Fir, Overed with 1/2" marine plywood, coated with west system expoy and 2 coats of beige Awlgrip paint. Deck Beams: White Oak 2 1/2" X 2" Varnished. Transcom: 6/4 Mahogany. Mast Step: 8/4 White Oak.  Four Hanging Knees: 8/4 White Oak. Floors: Replaced White Oak in transcom, midships, some foward, and engine room.  Keel Bolts: 3/4 Bronze.   Keel/ballast: Lead 2000lbs. Mast and Spares:  Stika Spruce with 1/19 stainless steel wire and hounds. Sails: Hood Dacron Mainsail, 3 Jibs@ High Boy, Warp Drive, 3# Foresail, Staysail Self Tacking 12oz  (Tan Bark) 2004, Light Sails 8oz #3 Genoa and Large Reacher.  4 Extra 1950's Era Foresails. Engine: Universal Atomic 4 cylinder diesel, mounted aft of midships. Rudder & Shaft:  Carbon Fiber 2011.    Fuel tank: Br

2016 Boston Whaler 24 DAUNTLESS

2016 Boston Whaler 24 DAUNTLESS

$99,563

Wrightsville Beach, North Carolina

Year 2016

Make Boston Whaler

Model 24 DAUNTLESS

Category Saltwater Fishing Boats

Length 24'

Posted Over 1 Month

2016 Boston Whaler 24 DAUNTLESS The cleanest Whaler you will find! This low hour dry stored boat is immaculate. She has a custom boat cover not shown. Only 29 hours on the upgraded 350HP White Verado.  The boat is still under warranty and shows better than new!   Hybrid Touch RayMarine Plotter/FishFinder E97 Blue Underwater Lights RayMarine VHF Fusion Blue Tooth Sirius Stereo Optional Glove Box Bow Table Fresh Water Shower Smart Box Portable Head w/ pump out (never used) Ski Pylon Factory T-Top Trolling Motor Panel (never fished) Trim Tabs Light Blue Hull Upgraded 350 Verado White (11K upgrade) Only driven on Sundays very slow in the driveway! Please contact Scott Douglas (910)200-9636

2008 Post 42 CONVERTABLE

2008 Post 42 CONVERTABLE

$649,000

Punta Gorda, Florida

Year 2008

Make Post

Model 42 CONVERTABLE

Category Fishing Boats

Length 42'

Posted Over 1 Month

2008 Post 42 CONVERTABLE IT'S NOT OFTEN THAT A VESSEL LIKE THIS COMES ALONG. ONE THAT IS EXCEPTIONALLY CLEAN AND HAS BEEN WELL MAINTAINED AND SERVICED. HER 540 HP CUMMINS HAVE ONLY 351 HOURS ON THEM. THE MARQUIP HAYDRAULIC DAVIT WAS INSTALLED IN 2013. THE AB TENDER WAS NEW IN 2013. THE HULL HAD A IMROM PAINT JOB IN 2014. ALSO COMES WITH SAT TV SYSTEM. THIS IS A ONE OWNER VESSEL AND HAS NEVER BEEN FISHED! OPTIONS: HARDTOP WITH SPREADER LIGHTS, OVERHEAD ELECTRONICS BOX, EZ2CY CENTER PANEL, FULL ENCLOSURE W/ TRACK TO TRACK & REAR PANEL, HATCH OVER BRIDGE OPENING, A/C ON BRIDGE, ROCKET LAUNCHERS ON AFT BRIDGE RAIL, TWO TEAK RELEASE MARINE HELM CHAIRS W/ COVERS, COCKPIT REFRIGERATOR/FREEZER, CENTRAL VAC SYSTEM, WASHER/DRYER COMBO UNIT, BACK-UP 240C FRESH WATER PUMP, GLENDINNING CABLE MASTER, INSTANT HOT IN GALLEY, SUB BREAKER PANEL FOR BRIDGE ELECTRONICS, LIVE BAIT WELL W/ PUMP & SPLIT LID, RUPP OUT RIGGERS - NEVER USED, TEAK & HOLLY FLOOR IN GALLEY, TEAK & HOLLY FLOOR IN HEAD, HIGH GLOSS DINETTE & DIVIDER TOP, PORT & STARBOARD ENGINE DRIVEN EMERGENCY BILGE PUMPS, LOFRANS 1500 WINDLESS, CUMMINS TWO BUTTON ELECTRONIC CONTROL, CARPET RUNNER, ICE MAKER, HUNTER DOUGLAS SHADES, AWL GRIP ENGINE ROOM, BOW PUL