Frers 45 Boats for sale

1-3 of 3

Sort By

1987 Yanmar Frers

1987 Yanmar Frers

$33,000

Stony Point, New York

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

1987 Yanmar Frers Relentless, Boat Details Fuel  Diesel Hull Material  Fiberglass   Engine Type  Inboard Beam  11 ft 4 in   Max Draft  6 ft 3 in Engine Make  Yanmar   Engine Model  2GM20F Engine Year  1987   Number of Heads  1 Holding Tank Size  25 gal   Water Capacity  30 gal Number of Berths  6   Number of Engines  1 Max Bridge Clearance  45 ft   Description/Condition 1987 Frers Frers 33: A proven winner ready to race or cruise. This is a well designed and maintained boat that loves to go fast.On the inside it’s all cruiser and on deck it’s all racer. Very comfortable and very reliable with top of the line high quality sails. SAILS/RIGGING: North 3DL Main Sail (Mylar/Kevlar/Carbon fiber) (2010) Excellent condition. North 3DL 155% Genoa (Mylar/Kevlar/Carbon fiber) (2010) North 3DL 155% Genoa (Mylar/Kevlar) (2006) UK Tape drive 110% Genoa Mylar Kevlar tapes (2009) used once North Airx Spinnaker .6 ounce (Red/White/Silver) (2010) North Airx Spinnaker .6 ounce(White) (2006) Big UK Airx spinnaker .6 ounce (Hot Pink/Silver/White)(2007) North nylon Spinnaker 3/4 ounce (Dark Blue/Light Blue/White) (2005) Asymmetric spinnaker, lightly used. ROD RIGGING (all rigging inspected and re-headed 2010) Aluminim Spinnaker Pole. More sails too many to list (older)Hall Spares Quick vangHarkin windward sheeting mainsheet car with gross and fine tune ROLLER FURLER JIB. Lazy jacks (not currently installed, stored in the boat) (2) Harkin/Barbosa 46.2 WINCHES, Primaries (recently serviced) (2) Harken 32ST WINCHES Cabin Top (recently serviced) (2) LEWMAR 43ST WINCHES Secondaries (recently serviced) Accommodations The frers 33' comfortably sleeps six adults dispersed between the v-berth fwd, the three midships settees including the pilot berth and the aft quarter berth. The nav station, located just fwd of the quarter berth, has full instrumentation including wind/depth/speed/heading/and a gps chart plotter. Additional features include: 2 hanging lockers, one in the V-Birth Bulkhead mounted dining table Teak folding door for v-birth Teak and holly sole Cabin cushions (2011) Galley: features include: ori

2001 Nautor Swan 82-007

2001 Nautor Swan 82-007

$1,591,618

Fort Lauderdale, Florida

Year 2001

Make Nautor Swan

Model 82-007

Category -

Length 82'

Posted Over 1 Month

2001 Nautor Swan 82-007 Alpina she competed and won key regattas around the world. She is a Nautor Swan 82 with  blue hull, black hi-modulous carbon mast and custom Harken deck hardware. Designed by German Frers, she's one of the 7 yacht built between 2000 and 2008. Under her current ownership, Alpina has been classified by MCA for charter and proven to be a successful regatta charter yacht. As expected from a Nautors Swan yacht, she features all the amenities of a world-class cruising yacht such as air conditioning, watermaker, refrigeration and a beautifully hand crafted teak interior.   In the summer of 2016, Alpina underwent a substantial maintenance period where the following works were carried out: Old teak deck removed and replaced with new 10mm teak deck. The teak is of very high quality. Glass on hatches removed and re-designed without the margin boards to give an up to date appearance. Winches and deck gear serviced. Clear coat repairs on mast, boom and radar mast. Transom door removed, re-painted and a new graphic for the boat name. Paint repairs on bow and around chafed areas. Yacht haul-out and sand blasted. Gel shield primer and two coats of antifouling applied. Engine and generator serviced. Propeller serviced. Watermaker control panel replaced, new membranes and filters, HP pump serviced. New Low Pressure pump installed. Safety equipment for SCV2 revised. Renewed (5 year survey had expired). Code for commercial use with SCV2. Tender steering and throttle arrangement replaced. Cruising sails serviced by North Sails France, New UV strip installed on the Furling Jib.  A zip system installed on three A Sails for racing. Engine room ventilation and pressed air system fans replaced. Refrigeration and Air Conditioning serviced. She has a long list of regatta victories, too long to summarize. Alpina is a proven winner and her new 3Di mainsail has helped to keep her as competitive as ever, getting the first place at the 2014 Heineken regatta. Alpina is available for inspection at her berth in Antibes, France. HULL & APPENDAGES Hull construction is monolithic glass fibre reinforced Vinylester laminate with carbon fibre used to reinforce the hull stiffeners. Structural bulkheads are carbon sandwich with nomex core. The freeboard has been increased by 10cm giving improved headroom throughout the boat; hull has been extended by 45 cm giving a spacious aft deck and ample stowage space in the lazarette. Topsides newly painted in 2008 in Awlgrip Stars & Stripes blue with white cove stripe and double-stripe boot top. Hull window for propeller inspection. Flush Forespar Marelon seacocks. Keel & Rudder Fin and T-bulb regatta keel, one ton lighter than standard Swan 80 keel, offering better u

2001 Nautor Swan 82-007

2001 Nautor Swan 82-007

$1,585,658

Palm Beach, Florida

Year 2001

Make Nautor Swan

Model 82-007

Category -

Length 82'

Posted Over 1 Month

2001 Nautor Swan 82-007 Alpina she competed and won key regattas around the world. She is a Nautor Swan 82 with  blue hull, black hi-modulous carbon mast and custom Harken deck hardware. Designed by German Frers, she's hull # 2 of the 5 built between 1999-2002. Under her current ownership, Alpina has been classified by MCA for charter and proven to be a successful regatta charter yacht. As expected from a Nautors Swan yacht, she features all the amenities of a world-class cruising yacht such as air conditioning, watermaker, refrigeration and a beautifully hand crafted teak interior.   In the summer of 2016, Alpina underwent a substantial maintenance period where the following works were carried out: Old teak deck removed and replaced with new 10mm teak deck. The teak is of very high quality. Glass on hatches removed and re-designed without the margin boards to give an up to date appearance. Winches and deck gear serviced. Clear coat repairs on mast, boom and radar mast. Transom door removed, re-painted and a new graphic for the boat name. Paint repairs on bow and around chafed areas. Yacht haul-out and sand blasted. Gel shield primer and two coats of antifouling applied. Engine and generator serviced. Propeller serviced. Watermaker control panel replaced, new membranes and filters, HP pump serviced. New Low Pressure pump installed. Safety equipment for SCV2 revised. Renewed (5 year survey had expired). Code for commercial use with SCV2. Tender steering and throttle arrangement replaced. Cruising sails serviced by North Sails France, New UV strip installed on the Furling Jib.  A zip system installed on three A Sails for racing. Engine room ventilation and pressed air system fans replaced. Refrigeration and Air Conditioning serviced. She has a long list of regatta victories, too long to summarize. Alpina is a proven winner and her new 3Di mainsail has helped to keep her as competitive as ever, getting the first place at the 2014 Heineken regatta. Alpina is available for inspection at her berth in Antibes, France. HULL & APPENDAGES Hull construction is monolithic glass fibre reinforced Vinylester laminate with carbon fibre used to reinforce the hull stiffeners. Structural bulkheads are carbon sandwich with nomex core. The freeboard has been increased by 10cm giving improved headroom throughout the boat; hull has been extended by 45 cm giving a spacious aft deck and ample stowage space in the lazarette. Topsides newly painted in 2008 in Awlgrip Stars & Stripes blue with white cove stripe and double-stripe boot top. Hull window for propeller inspection. Flush Forespar Marelon seacocks. Keel & Rudder Fin and T-bulb regatta keel, one ton lighter than standard Swan 80 keel, offering better upwind