Kenner Boat Boats for sale

1-15 of 72

Sort By

2005 Kenner 23VX Tunnel

2005 Kenner 23VX Tunnel

$23,999

Rockport, Texas

Year 2005

Make Kenner

Model 23VX Tunnel

Category Center Consoles

Length 24

Posted Over 1 Month

The interior and the exterior of this 2005 Kenner 23VX are in expected condition for its age. There is wear in the upholstery. The owner states that all systems, electronics and mechanics perform as they should. All the extras Trolling motor, Jack Plate, Power Pole, Electronics......... All you need for a day on the bay Stock #370408 150 HP MERCURY OPTIMAX POWER!!! MAGNUM TRAILER INCLUDED!!! READY FOR THE WATER!!! The Kenner 23VX is a fishing boat designed primarily for fishing enthusiasts and is known for its versatility and performance on the water. The Kenner 23VX measures 23' 10" in length, which provides a comfortable and spacious platform for fishing and recreational activities. The hull of the boat is constructed from fiberglass, offering durability and stability on the water. The boat's exterior design is practical, with a focus on functionality rather than flashy aesthetics. The interior of the 2005 Kenner 23VX is designed with fishing in mind. It features an open-deck layout with ample space for casting and moving around while fishing. The boat includesl rod holders, storage compartments, live well, bait well and a Minn Kota trolling motor. This boat offers seating for 9 passengers, with comfortable cushioned seats, including a cooler / livewell cushioned seat with backrest, and a pedestal seat for fishing. The 2005 Kenner 23VX is powered with a 2005 Mercury 150 HP OptiMax Saltwater series engine. It comes equipped with a T-top, which provides shade and protection from the sun. It can also serve as a mounting point for additional rod holders and electronics. Equipped with Garmin electronic navigation systems, and VHF radios, to enhance the fishing experience. This 2005 Kenner 23VX is a practical and functional fishing boat that offers anglers a comfortable and well-equipped platform for their fishing adventures. Its design and features cater to the needs of those who enjoy spending time on the water pursuing their favorite catch.

2006 KENNER 18 FT BAY BOAT WITH MOTOR AND TRAILER

2006 KENNER 18 FT BAY BOAT WITH MOTOR AND TRAILER

$8,200

League City, Texas

Year 2006

Make KENNER

Model 180 VX

Category Center Console Boats

Length 18 FT

Posted Over 1 Month

2006 KENNER 18 FT BAY BOAT WITH MOTOR AND TRAILER. RUNS GREAT! LEAGUE CITY TX AREA. WE ARE SECOND OWNERS HAD TWO YEARS. HAS NEW BIMINI TOP USED ONCE, GPS SYSTEM, LIVE BAIT WELL, FAIRLY NEW MARINE BATTERIES, LIFE JACKETS, ROPES, ANCHOR. SELLING DUE TO HEALTH ISSUES. BOAT RUNS GREAT. THE TRAILER COULD USE SOME WORK HAS SOME RUST ON IT. OTHER THAN THAT GREAT LITTLE FISHING BOAT. THIS BOAT SELLS TO BEST OFFER. CALL 281-650-3946 TO SEE. LEAGUE CITY AREA

16 FT. SKI-BARGE FLATS/BASS FISHING BOAT

16 FT. SKI-BARGE FLATS/BASS FISHING BOAT

$6,900

Seminole, Florida

Year 1979

Make Kenner

Model SKI-BARGE

Category -

Length 16.0

Posted Over 1 Month

THIS 16 FT KENNER SKI-BARGE IS TOTALLY RESTORED. BOAT ENTHUSIASTS RELENTLESSLY LOOK FOR THIS RIG! IT HAS NEW COMPOSITE RIBS, A THICK MARINE GRADE PLYWOOD SEALED DECK WITH A VERY GOOD MATCH ON THE FIBERGLASS DECK PATTERN. IT HAS A NEW COMPOSITE TRANSOM, AS WELL. THE HULL WAS SEALED, PAINTED AND CLEAR GEL COATED. IT HAS THE ORIGINAL RAILS WHICH HAVE BEEN RENEWED WITH ALUMINUM BONDED PAINT. IT HAS AIR POCKET FLOTATION AND IS SELF BAILING, BUT HAS AN ELECTRIC BILGE PUMP, IF NEEDED. THERE IS A NEW EASY CLIP STEERING HELM AND CABLE. THERE IS A NEW BRP SIDE CONTROL BOX WITH KEY START, TILT AND TRIM AND A SINGLE LEVER FWD AND REV. TROTTLE. THERE ARE NEW TROTTLE AND SHIFT CABLES, AS WELL. THE BATTERY IS A WEST MARINE 5 YEAR SEALED BATTERY. THERE IS ALSO A NEW 6 GALLON PORTABLE GAS TANK, ANCHOR AND LINE, FIRE EXTINGUISHER, AND A BOAT HOOK/OAR COMBINATION. THE CENTER CONSOLE HAS THE ORIGINAL WHEEL FOR NOSTALGIA, AND A REMOVABLE STORAGE COMPARTMENT UNDER THE FRONT CONSOLE SEAT. THERE IS A NEW PADDED SWIVEL SEAT FOR THE CAPTAIN. THIS BOAT HAS A VERY WIDE BEAM AND OPEN DESIGN. THERE IS NOTHING TO TRIP OVER BUT YOUR OWN FEET. THE OUTBOARD IS A 1998 50HP TILT AND TRIM WHICH HAS LESS THAN 100 HRS. IT IS NOT BROKEN IN YET. I HAVE IT SERVICED TWICE A YEAR WHETHER IT NEEDS IT OR NOT. THE TRAILER IS A MAGIC TILT WIDE BODY CUSTOM TRAILER WITH HIGHWAY TOURING TIRES. IT HAS THE NEW COMPRESSION TYPE SUSPENSION AND NOT LEAF SPRINGS TO RUST. IT IS LESS THAN 2 YEARS OLD AND HAS ONLY BEEN RAMPED TWICE. THE TOTAL TOWING WEIGHT OF THE BOAT, MOTOR AND TRAILER IS ONLY AROUND 800 POUNDS. THIS RIG IS IN MINT CONDITION AND HAS ALWAYS BEEN GARAGE KEPT. IT IS A REAL HEAD TURNER ON THE WATER. YOU CAN GET IN THE FLATS ON 6 INCHES OF WATER AND HAS A POLLING STICK. YOU CAN STAND ANYWHERE ALONG THE RAILS OR FROM BOW TO STERN AND IT NEVER LISTS. AS FOR SPEED; IT IS QUICK! HONESTLY, I AM LEARY OF OPENING IT UP TO FULL THOTTLE. ITS LIFE HAS BEEN SPENT IN ST. CLOUD AND KISSIMMEE FLORIDA ON THE BASS LAKES, BUT THIS IS A GREAT FLATS, BOAT TO FISH, CRAB OR EVEN GATOR HUNT. THE ONLY THING YOU NEED IS WATER. I HAVE ONLY HAD IT ON THE FLATS 4 TIMES SINCE THE REFURBISH. IF YOU KNOW THE BOAT YOU WON’T FIND ANOTHER IN THIS CONDITION FOR THIS PRICE. ONCE AGAIN, BOAT ENTHUSIASTS RELENTLESSLY LOOK FOR THIS RIG!

2003 Kenner 17 Pro Skiff

2003 Kenner 17 Pro Skiff

$5,490

Lakeland, Florida

Year 2003

Make Kenner

Model 17 Pro Skiff

Category Flats Boats

Length 17'

Posted Over 1 Month

2003 Kenner 17 Pro Skiff, **NEW ARRIVAL** Are you looking to chase the reds, and trout, and want to do it on a budget? Here you go! We just traded this 2003 Kenner 17 Pro Skiff tunnel hull, that will get you into the same skinny water as a $50,000 flats boat for a fraction of the price. This complete package includes a 75 hp Mercury 2 stroke, live well, forward fishing seat, poling platform, and a galvanized trailer. What are you waiting for? This package is priced to sell, and ready for a new owner. Call or email our sales team today.Old Salt Marine863-802-0543

2002 Kenner VISION

2002 Kenner VISION

$14,500

Seabrook, Texas

Year 2002

Make Kenner

Model VISION

Category Bay Boats

Length 21'

Posted Over 1 Month

2002 Kenner Vision, A lot of boat and a great price. This 2002 Kenner is ready to go. Lots of seating and plenty of room and storage. With a 150 hp Yamaha and Jack-plate this boat moves out well. Also has a Stereo, VHF radio and upgraded leaning post. Boat sits on an aluminum duel axle trailer with spare tire and guides. Wont last long! FINANCING AVAILABLE W.A.C. ALSO ASK ABOUT WARRANTIES!! COME SEE IT TODAY IN CLEARLAKE OR GIVE US A CALL! 281-326-9595

2004 Kenner 180 Center Console

2004 Kenner 180 Center Console

$10,995

Holiday, Florida

Year 2004

Make Kenner

Model 180 Center Console

Category Center Consoles

Length 18'

Posted Over 1 Month

2004 Kenner 180 Center Console This Kenner 18 Center Console with a Mercury 90hp outboard is the most boat for the money a coastal fisherman can hope to find anywhere, with bow mounted trolling motor and cooler. This model affords anglers full foam flotation, self-bailing deck, console with contoured windscreen and livewell, vertical rod holders, gelcoat interior for easy cleaning, 18-gallon fuel tank. All of this is combined with roomy casting decks and the Kenner Dry-Ride hull.Located in Tampa Bay at our Holiday store. For more than 20 years Sunray has sold thousands of new and pre-owned boats, please call 727-942-7221,to check location and availability of this listing. All prices are plus tax, tag and title fees. Not responsible for errors or omissions. No trailer included at this low price but trailers are available from Sunray Marine.

1972 Kenner Kittiwake

1972 Kenner Kittiwake

$2,500

Muskegon, Michigan

Year 1972

Make Kenner

Model Kittiwake

Category Daysailer Sailboats

Length 23'

Posted Over 1 Month

1972 Kenner Kittiwake The Kittiwake, designed by Carl Alberg and derived from the earlier South Coast 23, was built by Kenner Boat Co. for South Coast Sea Craft. In about 1965, South Coast took the molds and moved to a different location. A hull was left behind which Kenner cut, enlarged by a few inches, and re-faired to make molds for the Kittiwake. Sometime around 1970, the factory was sold to a conglomerate named AJ Industries which continued to produce Kittiwakes under the Kenner name. In 1973, Ray Greene & Co. of Toledo, bought the molds and built an unknown number of Kittiwakes until it ceased operation. Later, River City Sailcraft obtained one or more molds and built an unknown number of Kittiwakes. In 1978 the plant reportedly burned, and the molds were destroyed. This Kenner Kittiwake is in below average overall condition for her age, as she has a slightly soft fore deck and some deck leaks port and starboard side amidships that appear to be from lifeline stanchions. Tara appears to have a good paint job on the bottom, but there is a heavy build up of paint. The starboard side of the topsides of the hull is in good condition, but the port side has some minor surface abrasions. The cockpit grate looks very nice. The sails are all 40+ years old, with the main needing some stitching. The outboard motor is a 2004 Johnson 8 two stroke. This is the second owner for 30 years. Tara has great potential for a refit and could end up being a beautiful boat!

2005 Kenner 2450 Fishmaster

2005 Kenner 2450 Fishmaster

$15,995

Andover, Kansas

Year 2005

Make Kenner

Model 2450 Fishmaster

Category Center Consoles

Length 24'

Posted Over 1 Month

2005 Kenner 2450 Fishmaster, 2005 Kenner Tracker 2450 Fishmaster equipped with Suzuki 225 hp EFI outboard motor. Boat includes heavy duty cover, 2 livewells, left right and in floor rod storage with verticals on the console and captains seat, leaning post with storage box and rod holders, Sea Star hydraulic steering, Z-lock jack plate, Lowrance Hook 5 HDI/GPS fish locator, Radio with USB and AUX inputs, Wetsounds speakers and tandem axle galvanized trailer with brakes. 8 person capacity. Please call before coming to view as our inventory changes location frequently.

2006 Kenner/Mako Center Console, Vision 2103 with Etec 150

2006 Kenner/Mako Center Console, Vision 2103 with Etec 150

$16,500

Indiana, Pennsylvania

Year 2006

Make Kenner

Model Vision 2103

Category Center Console Boats

Length 21.5

Posted Over 1 Month

You are looking at a 2006 Kenner – Vision 2103 Center Console Bay Boat. The boat comes equipped with a 2007 Evinrude Etec 150 HP, 2 stroke with 332 hours. The boat has been well taken care of and is very clean with tons a storage for fishing or skiing gear. Used primary for fishing but frequently used to pull my kids around on a tube and skies. The Etec gets out of the hole very quickly and runs very well. I change the lower unit gear oil annually. In 2016, a new interstate battery was installed and the Etec received spark plugs and a tune up. The trailer is in very good condition with a new axle, hubs, bearings and powder coated rims in 2015. New tires were placed on the trailer in August 2016. Additional Information and Boat Extras: Composite grid and stringer system with non-skid decks and gunwalesLockable portside rod locker, bow, and starboard storage lockersAnchor LockerAnodized aluminum leaning post with storageFolding aft jump seats with storage belowInsulated In-floor fish box/cooler with drain.18 gallon bow live well with recirculating pump and lights22 gallon aft live well with recirculating pump and lightsCourtesy lights and navigation lightsNew Hummingbird 899 CXI SI. Down Imaging, Side Imaging and GPSHummingbird 197 C installed at the bow with trolling motorInstalled in 2015 - 82 lb thrust bow mount trolling motor with 2 batteries and dual onboard chargerCenter Console includes: Tachometer, Speedometer, Trim Gauge, Battery Gauge, and Fuel Gauge all fully functionalHydraulic sea star steering and trim If you have any additional questions feel free to contact me.

2004 Kenner Fish Master

2004 Kenner Fish Master

$11,900

Nokomis, Florida

Year 2004

Make Kenner

Model Fish Master

Category Center Consoles

Length 19'

Posted Over 1 Month

2004 Kenner Fish Master, This is a clean 2004 Kenner Fishmaster Center Console 19' Boat Has Hydraulic steering, 2 Batteries with on/off switch, With 140 HP Suzuki electronic Fuel inj. 4 stroke motor, Bimini, full covers, live well, fish box, pop-up cleats, leaning post w/ ice chest, Bow new Cushion and 2 back seats with cushions. Compass, comes with trailer and much more... Located in Nokomis, FL. Call Coastal Marine for more information.

2005 Kenner 1800 Vision Tunnel

2005 Kenner 1800 Vision Tunnel

$11,500

Atlantic Beach, Florida

Year 2005

Make Kenner

Model 1800 Vision Tunnel

Category Bay Boats

Length 18'

Posted Over 1 Month

2005 Kenner 1800 Vision Tunnel Bay Boat w/Tunnel Hull Powered by a '05 Mercury 90 2-Stroke.....GPS, S/S Prop, Livewell, 24V Trolling Motor, 3 Bank Battery Charger, Aluminum Trailer.......

2007 Kenner 1902 BAY SERIES

2007 Kenner 1902 BAY SERIES

$13,550

Sanford, Florida

Year 2007

Make Kenner

Model 1902 BAY SERIES

Category Saltwater Fishing Boats

Length 19'

Posted Over 1 Month

2007 Kenner 1902 BAY SERIES 2007 KENNER 1902 BAY-SERIES "ONE-OWNER"JUST TRADED-IN FOR A NEW BOAT! THIS ONE-OWNER KENNER 1902 CENTER CONSOLE IS IN EXCELLENT OVERALL CONDTION. POWERED BY A JUST FULLY SERVICED MERCURY 150-HP OPTIMAX WITH APPRX. 116-HOURS AND JUST FULLY SERVICED. FEATURES: T-TOP, GARMIN ELECTRONICS, LIVEWELLS, HYDRAULIC STEERING, STAINLESS PROP, BOARDING LADDER, SELF-BAILING HULL, DRY STORAGE AND MORE! INCLUDES THE BRAND NEW 2016 ALUMINUM TRAILER! FINANCING AVAILABLE ON APPROVED CREDIT! APPLY ON OUR WEBSITE!(866) 375-6143

1972 Kenner Kittiwake

1972 Kenner Kittiwake

$2,500

Muskegon, Michigan

Year 1972

Make Kenner

Model Kittiwake

Category -

Length 23'

Posted Over 1 Month

1972 Kenner Kittiwake The Kittiwake, designed by Carl Alberg and derived from the earlier South Coast 23, was built by Kenner Boat Co. for South Coast Sea Craft. In about 1965, South Coast took the molds and moved to a different location. A hull was left behind which Kenner cut, enlarged by a few inches, and re-faired to make molds for the Kittiwake. Sometime around 1970, the factory was sold to a conglomerate named AJ Industries which continued to produce Kittiwakes under the Kenner name. In 1973, Ray Greene & Co. of Toledo, bought the molds and built an unknown number of Kittiwakes until it ceased operation. Later, River City Sailcraft obtained one or more molds and built an unknown number of Kittiwakes. In 1978 the plant reportedly burned, and the molds were destroyed. This Kenner Kittiwake is in below average overall condition for her age, as she has a slightly soft fore deck and some deck leaks port and starboard side amidships, that appear to be from lifeline stanchions. Tara appears to have a good paint job on the bottom, but there is a heavy build up of paint. The starboard side of the topsides of the hull is in good condition, but the port side has some minor surface abrasions. The cockpit grate looks very nice. The sails are all 40+ years old, with the main needing some stitching. The outboard motor is a 2004 Johnson 8 two stroke. This is the second owner for 30 years. Tara has great potential for a refit and could end up being a beautiful boat!

1967 Kenner SUWANNE 47

1967 Kenner SUWANNE 47

$49,000

Elephant Butte, NM

Year 1967

Make Kenner

Model SUWANNE 47

Category Motor Yachts

Length 47'

Posted Over 1 Month

1967 Kenner SUWANNE 47 REALLY NICE RETRO MOTOR YACHT THAT IS A HOUSTBOAT.  SEXY LINES, EXELLENT CONDITION, LOTS OF EXTRAS AND IMPROVEMENTS.  TWIN OMC 300 CUBIC INCH, 200 HP BUICK V8 ENGINES WITH 150 HOURS ON REBUILDS.  5KW WESTERBEKE GENERTOR. CUSTOM, FULLY FUNCITONING FLY BRIDGE, CUSTOM CANVAS, LOTS & LOTS OF TEAK.  FORWARD SEEKING SONAR, FREE FALL WINDLASS AND MUCH MORE.  THIS BOAT HAS TOO MANY OPTIONS TO LIST AND LOTS OF FEATURES.  CALL BOB @ BUTTE MARINE 575-744-0008  BOB

2007 Kenner 2103 vision

2007 Kenner 2103 vision

$19,600

Jacksonville, Florida

Year 2007

Make Kenner

Model 2103 Vision

Category Powerboats

Length 21'

Posted Over 1 Month

2007 Kenner 2103 vision Bay Boat Powered by a Mercury 150 Verado.....Jack Plate, 4 Blade S/S Prop, Minn Kota 24V 80 lb. Thrust Trolling Motor, Lowrance HDS5 GPS, VHF, 2 Livewells, Tandem Steel Trailer.....