Boats for sale in Monroe, New Jersey

1-3 of 3

Sort By

2011 Sea Fox 172 CC Center Console 70HP Yamaha 4 Stroke with WARRANTY

2011 Sea Fox 172 CC Center Console 70HP Yamaha 4 Stroke with WARRANTY

$14,400

Monroe, New Jersey

Year 2011

Make Sea Fox

Model 172CC Center Console

Category Center Consoles

Length 17.0

Posted Over 1 Month

2011 Sea Fox 172CC Center Console with a 70 HP Yamaha Four Stroke Outboard motor with 74.8 hours with one year of factory warranty left on outboard motor. Lifetime hull warranty. Includes a 2011 Aluminum Venture roller trailer with aluminum rims, brand new tires and new manual winch. Ready to use today. One owner. Like new condition. Extremely clean, maintained boat, motor and trailer. Oil, oil filter, lower unit grease, gas filter/water separator replaced and winterized every year. Bearings and seals done yearly on trailer. Includes VHF radio with antenna, 12 gallon aerated live well, battery switch, 10 stainless steel rod holders, 4 flush mount stainless steel rod holders, lighted compass, floor lighting, Bimini top, customer winter cover for boat and motor, Yamaha hour meter, gas filter/water separator, 2 stainless steel convenience outlets, horn, boarding platform with ladder, 2 gunnel rod holders, power trim, Rack and Pinion steering and bilge pump. Great gas mileage approximately 8 MPG. There is not a scratch on the boat or motor, inside or out. Everything works on boat, motor and trailer. Boat still currently being operated. No rips or tears on cushions. No bottom paint. This is a must see used boat. Showroom condition. Pictures taken 10/2015.

Prindle 16 Sailing Catamaran and Trailer, customized for fast rigging

Prindle 16 Sailing Catamaran and Trailer, customized for fast rigging

$1,800

Monroe, New Jersey

Year 1982

Make Prindle

Model 16

Category Catamarans

Length 16.0

Posted Over 1 Month

Prindle 16 Sailing Catamaran and trailer, highly customized, many spare parts. At a glance:Clean Title for the boatClean Title for the trailerEverything is new - tons of money invested, see below.Boat and trailer are modified to save 40 minutes on rigging, see below.Trailer is modified to keep car away from salt water, see below. About Prindle 16 Prindle 16 has slightly larger hulls compared to the Hobie Cat 16, and tends to have more buoyancy and is often recommended for novices. Prindle is a tough boat and doesn't have the famous Hobie Cat weak spots where the hulls rot. Parts are readily available from online retailers This is a very fun boat with 1-4 people. I've clocked 20+ mph on it in the Keyport area and I have never sailed anything before and have had no instruction. I've even sailed with it overnight (island camping). About THIS Prindle 16 The boat and trailer have been modified to reduce the setup time. Prior to modifications it took me about an hour to rig the boat and get it ready to launch. After modifications, it takes me less than 20 (and I'm always doing it alone). Modifications include: Boat is on trailer backwards so that the rudders stay on.PVC rudder supports to prevent rudder damage.Quick-Release forestay (shackle rated for 2500lbs), quick-release boom, etc (no D-rings)Shrouds always stay on because the boat is backwards on the trailer.I use micro bungees for batten ties, they stay on.The only setup is therefore: raise mast, clip in boom, raise sails.Longer trailer tongue keeps your car away from salt water. Maintenance and Repairs - Boat (Starting with the Initial reconditioning after purchase)2012: New trampoline from Slo Sail and Canvas, Tanara UV-resistant thread and pocket upgrades. Should last for decades even in direct sunlight. ($480)2012: New PVC-coated rigging (all of it) from Salty Dog Marine ($150)2012: New Lines (all of them) from Salty Dog Marine ($125)2012: Minor sail repairs using dacron cloth and UV resistant polyester thread.2012: All new batten pockets (main sail)2012: All new fiberglass battens (main sail) ($50)2012: Bridle bow tang (stainless steel), new2012: Main cam cleat ($30)2012: New tell-tails, new sheaves for mast, many small hardware upgrades.2012: Minor punctures in hull repaired with marine epoxy (3mm or smaller)2012: Designed an integrated righting pole system (8 foot pivoting pole). Can't right the boat in the water without it, it's too heavy.2013: Added quick-release pins for everything - main to boom, boom to mast, etc.2013: PVC hiking stick, about 8' long.2013: New hull plugs and drain plugs.2014: New downhaul block Maintenance and Repairs - Trailer2012: new wheels and tires2012: Cold galvanized the whole thing.2012: all new LED lights: rear, sidemarkers, license plate, all new wiring with 12AWG ($150)2012: new trailer jack (with caster) ($30)2014: Custom built telescoping trailer tongue extender to keep the tow vehicle away from salt water. Extends trailer 4 feet, made out of 11 gauge steel. New coupler.2014: New galvanized axle, bearings, seals, etc. Old axle was rusted beyond repair. 2014: Brand new Bearing Buddies on hubs. Current ConditionSails are good and have no tears. Jib has a couple of teeth missing on the zipper but it works fine.Trailer is 100% with new axles, wheels, lights, coupler, etc.Boat is 100% with new everything, though looks a bit dirty due to the plankton in Keyport Bay and a few off-color epoxy spots.No repairs are needed at this time. You are welcome to arrange to inspect the boat. I'm available most days by appointment. I've invested $2840.54 in this boat over the last 3 years, and now you may not have to. (Yes, I have a complete maintenance record). This is obviously a unique item and I'm sure that it will find the right buyer who can appreciate the features.

1988 Bayliner 26 footer, Needs work WITH TRAILER

1988 Bayliner 26 footer, Needs work WITH TRAILER

$1,500

Monroe, New Jersey

Year 1988

Make Bayliner

Model -

Category -

Length 26.0

Posted Over 1 Month

The boat that you are looking at is a 1988 26 foot Bayliner. The boat needs some engine work and does not run. The interior also needs some reconditioning. The hull is in good condition. The boat also comes with a trailer. The trailer is a 2003 and is in good condition. THE BOAT IS BEING SOLD IN AS IS CONDITION. I prefer local pick-up only but if necessary we can work out a delivery fee. Full payment must be made within 7 days of order and picked up within 10 days of purchase. If you have any questions or concerns please feel free to give me a call at (732)-804-4466. Thank you, Victor Nikolov Monroe Machine