Project Boat For Parts Boats for sale

Project boat

$3,000

Fairfax Station, Virginia

Year 1987

Make Wellcraft

Model Coastal

Category -

Length 25.0

Posted Over 1 Month

Project boat for barter or sale 1987 Wellcraft Coastal 25 feet Will trade for guitars, amps, pro sound equip, or tractor parts New Cosa transom and deck floors Hull and bottom refinished with Awlgrip Needs somebody to finish project Comes with trailer new in 2004 used 2 times Top windshield removed Do not respond to add unless you have boat repair experience or fiberglass experience Has 225 Seadrive that runs and works. Email for more details .....Fairfax VA

Project Boat

$600

Madison, Tennessee

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

17.5' project boat with trailer, jet boat, stripped & ready to primer, paint & build, Berkeley jet pump, was set up for a 454 Chev. solid boat- Priced for quick sale, owner is retiring ALSO: Have a variety of used 'Hot Boat' parts available! Contact Ronnie, Showcase Upholstery & Boat Interiors Nashville, TN 615-262-2626 NO solicitors please

1987 Seaswirl Boat with Trailer Project / Parts

$500

Carson City, Nevada

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

OMC Cobra Outdrive 4.3 L Chevy Engine Helly Hensen Trailer type SS180 no title on trailer Length of Boat 17' 2" Great for a project / parts endeavor!! Make an offer and come and get it today!! THE OUTDOOR TOYSTORE

1983 SEA RAY 245 BOAT / "Project or for parts !?,...

$895

Cedar, Minnesota

Year 1983

Make Sea Ray

Model 245

Category -

Length 24,5

Posted Over 1 Month

"Light water-damage boat / Clean Title.- engine turns , need check / service . - no trailer - nice "cheap winter project / or only for parts ..

1983 Shamrock 6.2 Diesel Project 20 CC

$5,495

Murrells Inlet, South Carolina

Year 1983

Make Shamrock 6.2 Diesel Project

Model 20 CC

Category Downeast Boats

Length 20'

Posted Over 1 Month

1983 Shamrock 6.2 Diesel Project 20 CC 1983 20' Shamrock in original condition. It does have the original 302 Ford, and appears to have had the reverse gear replaced at some point. The boat was running when put up, but the bowl is gone off of the carburetor and the engine cannot be started. The boat has been sitting about 4 years with no activity. Everything appears to be solid. The trailer is included in the sale, but it has no title and only a bill of sale will be given with it. The tires are old and we don't know about the bearings, There are also no lights on the trailer. This boat will need some work, it IS NOT turn key and IS NOT running. It is a project boat, but a good start for someone to restore. I also have a 6.2 GM diesel, out of a truck, and most everything needed to do a marinization on it Parts include: Barr manifolds and risers (new), heat exchanger off of a big block GM, new glow plugs installed, new injectors (not installed), partial wiring harness, and a bell housing for the Borg Warner gear. This can go with the boat or not..... Make offers, It is by far the least expensive 20 center on Boat Trader!! SOLD AS IS, WHERE IS, NO WARRANTY!!

1999 FORMULA 27 PC PROJECT BOAT PARTS BOAT

$2,500

Constantia, New York

Year 1999

Make FORMULA

Model 27 PC

Category Cruiser Boats

Length 27.0

Posted Over 1 Month

THIS BOAT HAD A CABIN FIRE.IT IS NOT REPAIRABLE.WE REMOVED THE POWER FOR ANOTHER BOAT.IT HAS A GOOD WINDSHIELD,BOW RAILS,RADAR ARCH,AND CAMPER CANVAS FRAMES.LOTS OF OTHER SMALL PARTS.NOTHING GOOD IN THE CABIN INTERIOR.THERE IS A NICE LOOKING 27 PC ON E-BAY THAT NEEDS THESE PARTS TO REPAIR IT.THE SELLER IS BOAT_CENTER IF YOU BUY THIS BOAT YOU CAN COME HERE AND REMOVE ANYTHING YOU WANT OFF IT AND WE WILL DISPOSE OF THE HULL.OR WE CAN DELIVER IT TO YOU FOR A GOOD PRICE.IT MIGHT BE POSSIBLE TO HAVE SOMEONE HERE REMOVE THE PARTS YOU NEED AND SHIP THEM.PLEASE CALL 315 414 9456 WITH ANY QUESTIONS

1989 Bayliner Capri Project / Parts Boat with Trailer

$500

Carson City, Nevada

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

Length 18' 7" Outboard Open Bow Escort Trailer All glass good Great for a project / parts endeavor. Come and make an offer and pick it up today!!! THE OUTDOOR TOYSTORE

Yacht Club tandem boat trailer (Baja open bow project or parts)

$1,500

Janesville, Wisconsin

Year -

Make Yacht Club (Boat Is Open Bow Baja)

Model -

Category -

Length -

Posted Over 1 Month

Yacht Club trailer is in good condition dual tandem trailer. Must sell with the unique Baja open bow boat that is in rough condition but could be a project or parts. There is NO motor with the boat but it does have the jet propulsion by Berkley. Selling parts alone pays for the trailer but I don't have the time to deal with the boat. Very solid trailer!

Chris Craft Project Boat

$6,500

Hollywood, Florida

Year 1980

Make Chris Craft

Model 210 Scorpion

Category Cuddy Cabin Boats

Length 20.7

Posted Over 1 Month

Handy man special >>>>> This classic Go Fast boat needs a total refit, boat comes with drop in ready 260 HP Volvo Penta with Low hours and Low hour Alpha One MerCruiser Out drive and Gimbel housing take offs with original paint however they do not mach >> Includes new steering ram >>> Floor and gas tank have been replaced.Comes with Sunbrella Bimini top and Sunbrella cover that needs some tlc. Note: the above parts have never been installed in this project boat . PAY $6.500,00 for the parts and get a FREE Boat.

19' Tahiti Jet Boat (project)

$1,250

Lebanon, Pennsylvania

Year 1976

Make Tahiti By Bell Industries

Model Berkely

Category Jet Boats

Length -

Posted Over 1 Month

I started to restore the boat a couple years ago. My son sprayed a coat of gel coat on it but they must have given him the wrong hardener as it took forever to set up. I reupholstered the seats and have the backrest done. I have the vinyl sewn for the side panels but never got around to installing it. I spent almost 400. in marine vinyl alone. There is spare jet parts, Edelbrock exhaust logs,new parts and spare parts that go along with this. I started to sand the boat as I was just going to put epoxy paint on it and that's about where I stand with it. The motor is a 455 Olds and has a Berkely Jet Drive. The motor is free and did run before the restoration was started, but I have not had running since. I just don't have time to deal with it. Hull is in good overall shape and the boat has a new fiberglass reinforced plywood floor in it. I also have a new marine stereo system/speakers available if buyer has interest. Comes with clear title/trailer. First 1250.00 takes it .Local pick up only.Located in central PA.

30 FT Jet Boat Project

$15,000

Marco Island, Florida

Year 1998

Make Trojan Hull

Model Cabin Cruiser

Category Downeast Boats

Length 35.0

Posted Over 1 Month

Built in 1998, twin diesel jet boat cabin cruiser. Everything operational, needs top coat paint job. Over $30k in spare parts for the engine and jets. - Twin commercial saber diesels, 212 HP Each with 500 hours. - Turbo-charged after-cooled. Stainless steel exhaust and headers. - Dowty Jets - Bow Thruster $15k takes it all Located in Marco Island, FL

1961 Crestliner Explorer project boat

$400

Wilkesboro, North Carolina

Year 1961

Make Crestliner

Model Explorer

Category Cruiser Boats

Length 17.0

Posted Over 1 Month

Will need all wood replaced as seen in pics.. Appears to be mostly 1/2" plywood.Transom is solid.I have extra box of parts.I believe everything is there,even the little side curtains (good for patterns).Cabin windshield was gone when I got it.Trailer is solid however tires have dry rot.Trailer seems to be period correct but I'm not sure of manufacturer. If going a long distance I would strongly recommend trailering the whole rig. I can help you load.I have no paperwork for either boat or trailer. This would make a great project! Not many of these around anymore.Restored properly this will be a real head turner!Same old story,too many projects so this one has to go! I can store the boat for up to 30 days providing it is paid for in full.If you need more time I'll be happy to work with you.

1972 Sidewinder 16 Boat Project

$650

Grand Rapids, Michigan

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

Vintage 1972 SideWinder 16 boat project w/ trailer.... Has... - Newer Paint, Floor,Carpet, Reinforced Transom... Needs... - Your motor & controls, " Motor on boat was removed & sold for parts" - New seat cushions...Have original seat frames that need to be reattached to floor.. - Aftermarket Gas Tank reinstalled or just use a can.... - 1 Trailer Tire doesn't hold air for more than a few days...Both could use replacing. *** Great boat project** Have Registrations for both Boat & Trailer** Please Call or Text w/ any questions...Wiil add more pics as soon I can send you any you need.. $650.00 obo

1968 Aristo Craft 19 Foot Boat For Parts Or Resteration

$2,500

Greenwood, South Carolina

Year 1968

Make Aristo Craft

Model -

Category -

Length -

Posted Over 1 Month

This auction is for a 1968 Aristo Craft 19' fiberglass inboard boat from what I understand this was the first year for Aristo Craft to build fiberglass boats. This boat is in need of repair not sure of engine condition some freeze plugs have popped out, roof is in very good condition, all windows are in very nice condition also this boat has lots of good parts. This would make a good winter project. Please feel free to call me at 864-980-3377 for more information. Buyer must arrange pickup in Greenwood, South Carolina within 30 days after auction end unless other arrangements are made 20% non refundable deposit required within 24 hours after end of auction. Thanks for looking.

Chris Craft Project 1963 Holiday classic boat

$2,900

Ventura, California

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

1963 Chris Craft Holiday Restoration project. Boat is original and complete. Only Stem poles are missing. All chrome was redone in 2011. Boat is flipped and some frames have been replaced. All planks have been taken off hull and are labeled to be put back on or copied. Steering Wheel, and column restored and ready. All steering and rudder pipes and many more parts were powder coated in 2011. Original gas tank has been restored. Spray rails and engine lid have been beautifully Gel coated and cleared with Glaserit clear coat. Engine is taken apart and has 250 original hours and is in great shape. Many engine parts already restored. Starter redone in 2011. Engine box ready for upholstery. Floor boards/set bases/seat backs most interior, redone and bilge painted. Everything on original trailer ready to go. This will be a great project for someone. When you bring this guy back to life it will be gorgeous. The Last Picture is what it will look like when your done. Parts are worth way more than I'm asking. $2900