$8,200
Bellmore, New York
Category
High Performance Boats
Length
26.0
Posted Over 1 Month
1984 Wellcraft Nova II 26ft. Scarab type boat. Boat has twin Mercruiser 250HP 5.7 engines. Both engines were replaced in 2005, total hours on engines is 230, boat was in storage from 2009 to 2013 when I purchased it. The drives are Alpha 1, upper housings are from 1989 lower housings are new from mercruiser.In 2013-2014 winter season both engines were removed, gimbal housing were both replace (including all parts: drive boot, shift cable and boot, exhaust boot, gimbal bearing, trim sender and trim limit switched, mount bolts, and water hose and thru hull tube) Both exhaust Y pipes were replaced. Both engines have full tune-ups, wires, cap, rotor, plugs, high output coils, filters and oil. SS thermostat housings were installed, new circulator water pumps, new serpentine belts, both carburetors were rebuilt, all four exhaust manifolds and risers were replaced. Drive bottles and fitting were added. I also added shift assist pistons and brackets to both engines. Starboard drive upper housing was resealed, lower gear housing and gears were replaced as an assembly from mercruiser (brand new lower unit). Port drive upper was resealed and lower drive assembly was replaced with a brand new counter rotating drive from mercruiser. Props are SS 19 inch pitch, engines max out at 4600 rpm. All four drive trim cylinders were replaced with rebuilt late model cylinders that provide an extra 2 deg. down to keep boat bow down on start up. All external trim hoses were replaced. Boat has twin cylinder Bennet trim planes with position gauges. Cabin is all cushions, with small sink and fresh water (currently pump is inop), and ice box. Boat has a stereo and four speakers with remote control, Garmin 188c GPS. Bilge pump and switch just replaced, twin batteries were installed in 2013. I'm selling because I have no time to use the boat due new job, and my son has moved on to other interests. I've worked in Marinas for 50 years and have been trained on and worked on mercruiser engines and drives for 40 of those years. Only the best parts were used on everything.
