Wood Boat Boats for sale

1-15 of 5,743

Sort By

1988 Landry 52

1988 Landry 52

$65,000

Mobile, Alabama

Year 1988

Make Landry

Model 52

Category Shrimp Boat

Length 52

Posted 1 Month Ago

The condition of this shrimp boat was very good. Kubota 15kw generator installed Nov 2020 ($9000) Starter updated Aug 2020 Vessel hauled out, hull repainted, motors rebuilt and boots Hand painted Mar 2019. This Landry is hauled out and painted bottom and exterior annually. - The owner takes pride in the cleanliness of his vessel for lasting value. - The inside was clean and very manageable. - Nice shower room. - Galley had plenty of space along with the three berths for sleeping. - Nets and rigging in great shape. - Large ice makers (2400 lbs.) This is an all wood vessel, durable and has spent many years proving its integrity. Also an overlay of fiberglass on the Starboard and Port sides along with Bow and Stern decking for lasting dependability. Stock #125415 True working shrimp boat, loaded and ready to go! * Original one owner vessel, current owner commissioned this vessel in 1988, last Landry shrimp boat ever built. * Seller has rigged up to accommodate with Skimmers and still has skimmer equipment to be included with it if interested. * Dependability of this vessel is good for the long haul. There have been any trips and long hours for the crew of "Cap't Sid". It's a must when a heavy responsibility is in your hands. * Navigation with autopilot in place and all communications electronics, GPS, Radar, Depth Finder, etc. needed for a week or two on the water. * Current owner reports new 15k Kubota generator installed in Nov 2020 ($9000). * The deep V makes for a comfortable ride even in rough weather for the whole crew. * All wood vessel, durable and has spent many years proving its integrity. Also an overlay of fiberglass on the Starboard and Port sides along with Bow and Stern decking for lasting dependability. Reason for selling is current owner is now retiring and ready to sell !!.

1978 Crusader 34

1978 Crusader 34

$40,000

Pompano Beach, Florida

Year 1978

Make Crusader

Model 34

Category Dive Boat

Length 34

Posted 1 Month Ago

The boat looks to be in useable condition. The boat is 45 years old, so buyers should not expect a shiny, perfect boat. The boat has a commercial grade finish, which is made to last. There are some areas of rust, gel coat cracks, and wood rot, however nothing that appeared to be a major issue. There is growth on the bottom, indicating new anti-fouling paint should be applied. Stock #365190 Very nice 1978 Crusader 34 dive boat! Caterpillar 3208T power! ******MOTIVATED SELLER BRING OFFERS**** This boat is great platform for diving. It has been custom made to give divers plenty of room for gear. With all of the open deck space, the boat could also be used for commercial fishing, lobster, transport, cargo and crabbing. THE BOAT DOES NOT HAVE A "COI", however the next owner can apply for one with the USCG. It is powered with a turbocharged Caterpillar engine. The boat has a heavy gel coat finish with a course grit non-slip surface. The cabin can be used for storage and there is a head.

1946 Gar Wood Commodore Runabout, restored wooden boat

1946 Gar Wood Commodore Runabout, restored wooden boat

$59,000

Clayton, New York

Year 1946

Make Gar Wood

Model Commodore

Category Runabout Boats

Length 19.0

Posted Over 1 Month

Antique Boat America is your Premier Broker for Antique & Classic boats. Buy a boat, sell your boat, or have us find you next classic! STOCK #31350 This rare Gar Wood Commodore was delivered to Fitzgerald and Lee boatworks in Alexandria Bay New York in 1946. At the time they were the largest dealer of Gar Wood boats in North America. The boat spent many years in Chippewa Bay on the St. Lawrence River and later moved to Alabama and Florida. This boat is an award winning boat and was fully restored with a complete engine rebuild and a new 5200 bottom. The Commodore was regarded as one of the most beautiful double cockpit runabouts of its time, and arguably of all time. Would you like to call us directly? Inquiries on this boat may be directed to Mark Krzyzanowski by email at [email protected] or direct line, 800-675-4089. Mark is a wooden boat lover and has been involved with the classics for over 20 years! We are located in the heart of the 1000 Islands, Clayton, NY; arguably one of the most popular wooden boat regions in North America. Home of the Antique Boat Museum, National Headquarters of the Antique & Classic Boat Society, and several world class restoration shops. 90 minutes North of the Syracuse, NY international airport, 90 minutes South of the Ottawa, ON international airport. 30 minutes North of the Watertown, NY airport. We encourage you to fly in and take a look at the boat with your own eyes! Offering free shuttle service to and from the Watertown airport! Let us help to arrange shipping, or keep the boat in our care until you are ready to pick it up. About Antique Boat America: Headquartered in Clayton, NY -Antique Boat America is your Premier Broker for Antique & Classic Boats. For the last 11 years, the company has provided a broad range of services to enthusiastic fans of wooden boats. Antique Boat America offers over 1,800 boats for sale on its website. To date, 29 million visitors have viewed the new daily listings and the extensive inventory of boats built by Gar Wood, Chris Craft, Riva, Century, Lyman, Ditchburn, Greavette, Minett-Shields, and Hacker Craft. The company also offers shipping, surveying, brokerage, transport, analysis, evaluations, and also assists its clients in obtaining competitive insurance. For more information, visit www.antiqueboatamerica.com or call 800-675-4089. Antique Boat America is the world's LARGEST broker of Antique & Classic Boats Our Showroom: Located in the heart of the 1000 Islands Region, Clayton, New York. Our 20,000 square foot facility houses over 100 beautiful Antique & Classic boats, all offered for sale under one roof. Have you thought about financing your next classic? That's right: at Antique Boat America, you can buy, finance, and transport your next classic all in one place! We are proud to offer classic boat financing options through JJ Best Banc. Contact Mark Krzyzanowski: [email protected] or 800-675-4089 Talk to us today...Let's make a deal! Reference STOCK #31350 All that's missing is YOU in the Captain's chair! Call us now and let's deal on this great boat. We welcome pre-purchase inspection on every boat that we sell. We provide free pick up to & from the Watertown, NY Airport.Buyer is responsible for all shipping costs. We can help to arrange shipping worldwide at reasonable rates. These are pre-owned boats and sold as-is with no implied conditions or warranty.

1965 Gar Wood Personal Racer

1965 Gar Wood Personal Racer

$149,001

Cape Coral, Florida

Year 1965

Make Gar Wood

Model Personal Racer

Category High Performance Boats

Length 47'

Posted Over 1 Month

1965 Gar Wood Personal Racer This is Mr Gar Wood's personal race boat that he raced Miami to Bimini in 1966 and won! In 2007 the current owner started his re-fit with a lot of NEW parts and work listed below...2-455 h.p. Caterpillar Engines with 150 hours, New Shafts, Struts, Gears, Longitudinal cockpit deck, Transom, Dash, Head, New 600 gal fuel tanks, New 265 gal water tank, Hull was epoxied by Gar Wood in 1966, New $5,000 Raytheon bottom machine, Top Speed of 42 mph, When idling she uses 2.4 gallons per hour and has a speed of 8 mph, Over $400,000 spent in three year restoration. She is a replica of Gar Wood's 1922 46 ft. Gar Jr. that held a 53.9 mph speed record from Miami to New York and this record was held for 35 years. The owner has researched this yacht and he believes that she was built in 1952 and raced by Gar Wood and his team. Jan Saxton Yacht Documentation in Fort Lauderdale has in her research produced a Title (year built 1965) from  Mr Garfield A Wood and Gar Wood Research Division.

2016 Wood Custom Penobscot 14

2016 Wood Custom Penobscot 14

$6,500

Norfolk, Virginia

Year 2016

Make Wood Custom

Model Penobscot 14

Category Tender Boats

Length 14'

Posted Over 1 Month

2016 Wood Custom Penobscot 14,Completed from scratch on 8 September by Pamola Boats. Not a kit. This boat is a Penobscot 14, designed by Arch Davis. The stringers and structure are Douglas Fir, the keel is white Oak, the hull is Hydrotek (meranti) plywood, and the trim, rails and seats are African Mahogany. The entire boat is encapsulated with three coats of epoxy. The inside has 5 layers of Flagship spar varnish and the outside has three layers high quality Interlux Brightside Polyurethane. All screws that remain in the hull are stainless steel. Oars are Douglas fir with mahogany stripes to match the boat. They have three layers of epoxy and 5 of varnish. The handles are bare wood threaded five times with linseed oil. They have leathers stitched to protect them from oar lock scarring. The transom is triple layered and has a removable notch to accept an outboard motor. The strip that runs along the bottom protects the keel, is sacrificial and easily replaced. I will also give you a thumb drive with all the pictures that I could find of the build. This is a virgin hull. It has never been in the water. This boat is a piece of art and is made to be beautiful. It is strong and functional but is not ment to be treated roughly. There is no trailer. I can get one from NorthernTool and put it together for you but there are many options out there for a boat this size. Text preferred. 361-44three-09one1 $6500

1952 Gar Wood Racing / Sportfish

1952 Gar Wood Racing / Sportfish

$185,000

Fort Lauderdale, Florida

Year 1952

Make Gar Wood

Model Racing / Sportfish

Category Powerboats

Length 46'

Posted Over 1 Month

1952 Gar Wood Racing / Sportfish An authentic Gar Wood.  Garrett Wood's original race boat.  See attached photos for ownership history.

RANGER COMMANCH 395VS FORREST WOOD BASS BOAT 1990 -  225VRO  JOHNSON MOTOR

RANGER COMMANCH 395VS FORREST WOOD BASS BOAT 1990 - 225VRO JOHNSON MOTOR

$12,000

Gilford, New Hampshire

Year 1990

Make FORREST WOOD RANGER

Model COMMANCHE 395VS

Category Bass Boats

Length 20 FEET

Posted Over 1 Month

I AM THE ORIGINAL OWNER OF THIS BOAT I SPECIAL ORDERED IT IN SPRING 1990 FROM OWENS MARINE, HOOKSET, NHRANGER COMMANCHE 395VS 1990 (This is a Forrest Wood Ranger with one of the best Hulls ever made.)1990 JPHNSON 225 VRO MOTOR - JUST SERVICED AT LOCAL MARINASPECIAL 2 TONE METALIC COLORS - BOAT HAS JUST BEEN DETAILEDCARPET IN EXCELLENT CONDITIONVERY LITTLE USE UNDER 20 HOURS - ALWAYS GARAGED - FRESHWATER USE ONLYMOTOR GUIDE BRUIT COMPETITION MODEL 765 TROLLING MOTOR 45 LBS THRUSH 24 VOLTRITE HITE JACK PLATEMULTI TUCK & ROLL SEATS - WERE OPTION3RD POLE SEAT - WAS OPTION35 GAL. FUEL TANKRANGER TANDEM AXLE TRAILER WITH DISC. BRAKES & SPARE TIRECOMES WITH PADDED DELUXE RANGER BOAT COVER IN LIKE NEW CONDITIONBOAT - MOTOR - TRAILER ARE SOLD AS IS NO WARRANTY WRITTEN - IMPLIED OR EXPRESSEDI HAVE TRIED TO THE BEST OF MY ABILITY TO DESCRIBE THE VEHICLE BUT KEEP IN MIND IT IS MY OPINION AND THIS IS A 1930 STREET ROD AND NOT A BRAND NEW VEHICLE.NOT RETURNABLE

wood boat molds steam boat

wood boat molds steam boat

$500

Thunder Bay, Ontario

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

these molds are to build a 21 foot fantail 1890's design, built with 3/4 inch cedar strips I have build these boat 2 times these photos the boat was powered with a yanmar diesel my second boat is steam powered. please call jamie if u have any questions 807 475-5497

1963 wood crackerbox boat

1963 wood crackerbox boat

$21,000

Lacey, Washington

Year -

Make 1957-58 Corvette Running Gear

Model -

Category -

Length -

Posted Over 1 Month

This project was just completed. Features a '58 Corvette 283 with '57 Corvette FI heads, new Edelbrock manifold and 500 cfm carb. Joe Hunt Magneto with Taylor wires. Engine and boat have test time only, 1 hour, 56 minutes total. a complete running log book will be furnished to the buyer. Vintage Hilborn mechanical fuel injection is available at extra cost. Boat has undergone a complete rebuild, each part or component being either rebuilt, fabricated, or OEM replaced. Marine hardware is Nicson and gaskets were manf. from original templates. Military spec(AN) nuts and bolts throughout. A new aluminum fuel tank was manf. and race foam filled. Seats were made from sheet metal, ribbed, and upholstered in heavy weight vinyl. Mounts are contained in a single piece of oak, aluminum channel reinforced. Seat package removes as one piece.Side exhaust system was built from scratch utilizing aluminum and silicon tubing. Silicon is 5 ply and designed for wet exhaust systems. The entire wiring system was replaced utilizing marine grade components. Each wire is protected with blade circuits. All connections were crimped, soldered and heat shrink wrapped. Gauges are Stewart Warner Wings with electric senders. A master cut off switch is wired directly to the new Optima battery.The bottom was replaced by the previous owner who also rebuilt the engine. He experienced some overheating problems which was a result of a water pump vane disintegrating and plugging the water ports in the block and heads. All the rubber slag was located and removed. Paint is PPG OMNI Urethane over a fiberglas wrap, which was restored before paint. Trailer was restored with new bearings, wheels, tires, wiring, lights, carpets, et al. Red parts are powder coated, and the black is Gator Poly bed liner paint. Please go to www.youtube.com/channel/UCLHNB9ApKb6xW8jpBp5qAwA/feed to see the boat on the water!, $21,000, fob Washington State and will consider partial trades for a project Jersey Skiff, or another project Crackerbox. Delivery to the West Coast will be considered. Boat and trailer have clear titles and registrations.

15 ft Wood Boat

15 ft Wood Boat

$550

Magnolia, Texas

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

15 ft Wood Boat Fiber glassed with West System EpoxyEpoxy PrimerPetit Easypoxy paintStainless Steel Trailer Made in 2002. Used 3 times on my subdivision late with a 25HP. The paint is light beige No shipping, must pick up. Thank you, Matt

Vintage Wood Runabout Boat

Vintage Wood Runabout Boat

$4,700

Montrose, Iowa

Year 1961

Make Sportcraft

Model Capri Deluxe

Category Runabout Boats

Length 17.0

Posted Over 1 Month

For sale is a great vintage wood runabout boat that is ready for the water. We have owned this boat for three years now and use it whenever possible on the Mississippi River. We just took it to Florida for a vintage boat show on Lake Dora and had a great time cruising the Harris Chain of lakes and the famous Dora Cannel, we even trailered it to Deland Florida for a fun day on the St. Johns River. This boat is in great shape and was restored some time back but I had to replace the transom with the correct wood, adhesives and sealants and now is strong as ever. The motor is a 1979 Mercury 90 HP according to the serial number with tilt and trim and runs good but could use some carb work cause it is a little cold blooded at start up. I have made new seat cushions and custom fitted a travel cover for it. The Bimini top came from another boat and works but does not snap on the best around the windshield. You will be buying in as is condition with no warranty's for local pick up only. If you have any questions please give me a call at 319-520-0131.

1961 Lyman Wood Boat

1961 Lyman Wood Boat

$13,900

Minocqua, Wisconsin

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

This is a 1961 Lyman 20' Runabout with a 2004 Loadrite trailer. The boat is in really good shape with no "dry rot", runs great and is smooth on the water.Can help with shipping or bring to Chicago area.

Vintage wood boat

Vintage wood boat

$2,150

Thomson, Illinois

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

I was told this wood boat was built from a Chris Craft kit. This boat is 13.5" in length with a 62" beam. It has a 22" draft. The wood does not leak. The boat has the original 1957 18hp Evinrude with electric start in excellent condition. It has a newer Yacht Club trailer. The battery and fuel tank are also included. The boat, motor, and trailer are all in excellent condition. This is definitely a head-turner, and it's fun to ride. The boat, motor, and trailer are the only items for sale of $2150.00.

1955 Century Viking Wood Boat

1955 Century Viking Wood Boat

$4,500

Hamilton, Ohio

Year 1955

Make Cetury

Model Viking

Category -

Length 19.0

Posted Over 1 Month

1955 Century Viking Gray Marine 620 with only 250 hours This boat is in good condition, with the exception of damage to the bow. It was being stored by the lift hooks, when the the front one broke, pulling through the wood on the bow. Please see pics for details. Would make a great winter project, and a very nice piece once repaired. This boat and trailer are being sold with a bill of sale. The trailer could use some paint, but is in good condition with new tires and wheels.

1984 Custom Wood Speed Boat

1984 Custom Wood Speed Boat

$11,999

Woodville, Ohio

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

For Sale: 14ft 1984 Custom Tunnel Hull 2-seater wood speed boat. Also included in the sale is the custom trailer that is used to haul the boat. Original speed boat design proofs (un-patented) included with purchase. Title in hand for both the boat and trailer. Motor purchased new in 1998, original receipt included for the Mercury '96 200 XR 2SS at a cost of $8,650. Motor currently has very low hours and has only been taken out 2-3 times in the past 4 years. The boat runs great and there are no mechanical issues to speak of. There a few small imperfections in the paint; however, overall it's in excellent shape. The boat is very unique and what I'd consider a collectors given its wood construction. There aren't any others like it on the water and it's certainly a head turner, especially at 100mph. This boat has documented speeds of 110mph+. The link below shows the boat running when I had it out last month at Coldwater, MI: https://youtu.be/BiKHNvNnRnQ https://youtu.be/eEdwiXqY2HE https://youtu.be/WZoQfB7bMPU