Parting Out Boat Boats for sale

Parting Out 1977 Century Arabian

$5,000

Conneaut, Ohio

Year 1977

Make Century

Model Arabian

Category -

Length 19.0

Posted Over 1 Month

First let me make it clear that this is a great restoration project. Boat was advertised as solid and in great condition. I purchased the boat unseen and had it shipped from Iowa. Took about a half hour to see that the stringers were bad. I've decided NOT to do the work. I don't have the time. Everything for sale. Will sell Boat, Motor and Trailer for $5,000. Will sell boat without the motor and transmission for $1,000. Very Good interior. No rips or tears. Gauges function. Bright work in excellent shape. All original pieces. Glass is excellent. Boat has 565 original hours. Motor and transmission are original and never been opened. Runs great and shifts perfectly. Will sell the motor and Transmission for $3,000. Will sell trailer separately for $2,000. Trailer in excellent shape with good bearings and brand new tires.

1998 Offshore Center Console Boat, Twin 2000 Yamaha 150 HPDI PROJECT!

$8,000

Jacksonville, Florida

Year 1998

Make OFFSHORE YACHTS

Model -

Category Center Consoles

Length 26.0

Posted Over 1 Month

This is for everything in the pictures other than the trailer. 1998 Offshore Center Console This boat is a project boat! Boat struck something in the water and damaged the hull. (estimated fiberglass repair is $2500) Large T-top. Power Steering Tilt/ Trim Bennett trim tabs Lots of storage. Twin 2000 Yamaha 150hp HPDI These engines do not run. They have sat for a while. May be parts motors. Counter rotating pair. Port Side motor is complete. Starboard motor seems to be missing some parts. We bought this boat with intentions of repairing and using for our personal boat. We have decided it is more work and time that we anticipated. We will sell the boat alone. We will sell the trailer alone. We will sell the motors alone. We may consider parting out the boat. Picture 1-4 are of the boat prior to damage. Picture 5-6 are current trailer specs. Trailer can be purchased separately. The remaining pictures are very recent. This boat is kept on NAS JAX Navy Base. Please note that I have listed this boat with several options to buy and it advertised locally. If it sells with options on other listing first this list may end early. Please see my other listings. Any question call (913) 884-1000. Deposit of $1000 by Pay-Pal. The balance to be paid by cash, wire or cashier's check. Our Story: My son is currently an active duty Seaman stationed in Jacksonville, FL. He is soon to be medically retired and his Military career will end. He was seriously injured during the Navy Seals training program. He was diagnosed with head injury induced Epilepsy and suffered seizures for 14 months until he finally required brain surgery. During his struggles he was able to work on limited duty, attend college class and shadow in the Radiology department in the Navy hospital. I have decided to help him earn extra money while he completes his education. We shop for neglected boats and restore them to their prior glory. In the past year we have completed 6 boats with plans to work our way up to a blue water capable boat. We have compiled a list of some of the best vendors in Florida including trailer repair, detailing, upholstery, marine mechanics and more. Our goal is to use retired, disabled and active duty military sources when possible. You can feel confident that you will be dealing with very honest people with the utmost integrity. Normal 0 false false false EN-US X-NONE X-NONE

1973 Correct Craft Ski Nautique Boat Ramlin Trailer 550 Original hours 351 DNR

$1,900

Daytona Beach, Florida

Year 1973

Make Correct Craft

Model Ski Nautique

Category -

Length 17.7

Posted Over 1 Month

Willing to part out, MAKE OFFERS ON PARTS!! This listing is for a used 1973 Correct Craft Ski Nautique with a 351 W Pleasure Craft marine motor. Has 550 Original hours of use. Stored indoors most of its life. Was used in the Fresh Water but has some corrosion from the Daytona Beach Florida Salt air. The interior is in good shape, no soft spots in floor and stringers look good. Ramlin trailer is in good shape, has a few surface rust spots but just surface. Trailer tires are marginal, for short distance Ok. Long distance towing will require new tires. I have purchased plenty of inboard ski boats, and I have a few right now. I usually just chop these older ski boats up for the parts, because they are worth more than the whole. But this boat is almost too nice to chop up. Hull and running gear are in good condition, there are some scratches, gel coat cracks, considering it is 44 years old. The side panels and rear boat panel are still intacked, gone on most of these boats, rotted away. The upholstery is a little crispy and has some open cracks but functional. This boat is unrestored, it is all there, and has been not been molested. In need of a good buffing and wax job. Mainly just needs a long block, marine carb, maybe manifolds and rizers, and some elbow grease and will be a very nice waterski boat. The radio does not work and there are no speakers. It comes just as shown in the pictures. Listing it for sale as is, no warrenty. No shipping, will need to be picked up in Daytona Beach, FL. May be willing to drive up to 400 miles one way for $2.00 a mile, only if fully paid for upfront . If it does not sell I will be parting the boat out for parts... Check out my feedback and the items I sell!!!! You will not be disappointed with this boat..

1998 Offshore Center Console Boat, Twin 2000 Yamaha 150 HPDI & Trailer PROJECT!

$12,000

Jacksonville, Florida

Year 1998

Make Offshore

Model -

Category Center Consoles

Length 27.0

Posted Over 1 Month

1998 Offshore Center Console This boat is a project boat! Boat struck something in the water and damaged the hull. (estimated fiberglass repair is $2500) Large T-top. Power Steering Tilt/ Trim Bennett trim tabs Lots of storage. Twin 2000 Yamaha 150hp HPDI These engines do not run. They have sat for a while. May be parts motors. Counter rotating pair. Port Side motor is complete. Starboard motor seems to be missing some parts. 2003 Slide On Trailer Aluminum Construction Brakes on one axle. Highly maintained. Very dependable. We bought this boat with intentions of repairing and using for our personal boat. We have decided it is more work and time that we anticipated. This auction is for the entire package. We will sell the boat alone. We will sell the trailer alone. We will sell the motors alone. We may consider parting out the boat. Picture 1-4 are of the boat prior to damage. Picture 5-6 are current trailer specs. The remaining pictures are very recent. This boat is kept on NAS JAX Navy Base. Deposit of $1000 by Pay-Pal. The balance to be paid by cash, wire or cashier's check. Our Story: My son is currently an active duty Seaman stationed in Jacksonville, FL. He is soon to be medically retired and his Military career will end. He was seriously injured during the Navy Seals training program. He was diagnosed with head injury induced Epilepsy and suffered seizures for 14 months until he finally required brain surgery. During his struggles he was able to work on limited duty, attend college class and shadow in the Radiology department in the Navy hospital. I have decided to help him earn extra money while he completes his education. We shop for neglected boats and restore them to their prior glory. In the past year we have completed 6 boats with plans to work our way up to a blue water capable boat. We have compiled a list of some of the best vendors in Florida including trailer repair, detailing, upholstery, marine mechanics and more. Our goal is to use retired, disabled and active duty military sources when possible. You can feel confident that you will be dealing with very honest people with the utmost integrity. Normal 0 false false false EN-US X-NONE X-NONE

1989 Baja 272

$7,500

Las Vegas, Nevada

Year 1989

Make Baja

Model 272

Category Runabout Boats

Length 27'

Posted Over 1 Month

1989 Baja 272 Nevada Boat Company is parting out this 1989 Baja 272. Hull - $7500 Motor - $7500 for a fantastic 500hp Big Block Chevy motor with lots of extras. It's 509 cubic inches and has tons of work on adding more power.. This motor can go in a boat or car. Trailer - $5995 for 30' Aluminum Boat Trailer with dual 8200 lbs axles and disk brakes.

Bayliner Trophy 2502 with Volvo AQAD41 Diesel Engine and DP290 Duoprop

$18,500

Angleton, Texas

Year 1992

Make Bayliner

Model Trophy

Category -

Length 25.0

Posted Over 1 Month

0 0 1 11 66 Company 1 1 76 14.0 Normal 0 false false false EN-US JA X-NONE 1992 Bayliner Trophy 2502 with Volvo AQAD41 Diesel Engine and DP290 Duoprop Sale or Trade I originally purchased this boat so I could do more spearfishing but decided that after a long day of diving I really did not want to pilot a boat back to shore. I have more money in this boat than I am selling it for, with that said, I am not in hurry to sell it nor do I need to. I just hate seeing it sit unused. I no longer spearfish and have not taken the boat out in over a year. This Trophy is a Walkaround with a cabin. A Volvo diesel engine has been installed as an in-board and it also has the Volvo Penta DP 290 outdrive. The tank holds 100 gallons of diesel and is full. The gentleman I purchased the boat from said it gets close to 5mpg. I did not test this as I never took it more than a mile offshore but it does get good mileage putting up and down the Intercoastal. After I purchased the boat I pulled out the old electronics that were in it and installed a Garmin 7212 Chartplotter, Garmin VHF200 radio, Garmin GMR 18 HD radar, Kenwood Apple iPod/Satellite Radio Marine receiver, and Kenwood 61/2” 2-way speakers. If I remember right, all this stuff somewhere between $5000-$5500 when purchased. I never decided which one I wanted so right now the boat does NOT have a transducer. The boat has a metal grate platform on the back that can be used as a swim platform and it also holds a SSI 320 quart ice chest which will also come with the boat. The boat has a hard fiberglass top. I also purchased a custom cover for the boat which was $500 or maybe a little more. It comes with the aluminum tri-axle trailer you see it on. I installed new wiring and LED lights on the trailer and also added side marker lights. The trailer does not have brakes and pulls just fine. As far as the boat: The previous owner installed a Vintage Air AC system but I’ve never used it. The belt is also not hooked up on the compressor. I asked the guy I bought it from if it worked and he said yes but there was a squeak. I looked at the compressor pulley alignment with the crank pulley and it needs to be spaced out so that could be the only problem. This boat does have a head and freshwater tanks. I’ve never used them so I could not tell you if it works. Same thing for the live well. The previous owner stated all of this worked. The boat looks pretty good but could definitely use a good buffing in my opinion. There are also some various gel-coat cracks. The seats could use some new covers/cusions and the engine could use a good scrape and repaint, I just have not had time to do it. It comes with an anchor that has been mounted but never used. I have the good service manuals for the diesel engine and the outdrive and I'm pretty sure I have the boat owner's manual as well which I will give to the buyer. I also have the Garmin 18 HD instructional DVD that I purchased from Amazon and never opened to give to the buyer. The last time I did take out the boat I bent the props. I had a spare set so I cleaned them up, painted them, and put them on so while they look new in the picture, they are not, just painted but in good condition. I still need to tighten them up. I did not have a lock washer so I had to order one so I just loosely put them on. If I don’t get to it, I will give those parts to the buyer should the boat sell. I also have replaced the bellows and the throttle cable. I have Volvo paint and primer for the engine that I will give the buyer. Also have some paint for the outdrive that you can have. The trailer tires hold air and I have not added any in the time I owned it, surprisingly. I replaced one tire on the trailer so there is one tire that is practically new. The other 5 will probably need to be replaced sooner than later and if the boat is to go on a long road trip I would do it before the trip. I think this should cover it for now, lemme know if you have any questions and I’ll try to answer. I have the title for the boat on hand but will have to give a bill of sale for the trailer. The previous owner had the trailer registered as home made, I just kept it the same. I may be open to trades but the auction will still need to be completed through Ebay so Ebay can get paid. Boat is also for sale locally so I reserve the right to end the listing early if need be. Trades I would be interested in can be partial plus cash or full trade. I’d value the trade at around $20K-$22K. Things that I would be interested in and kind of in order would be: Heavy Equipment: Man lift, preferably towable and articulating with at least 35-40’ height, closer to 50' would be perfect. Need one for my yard so not an indoor unit. Hanging Christmas lights on my extension ladder sucks and I have lots of oaks that need trimming. Might consider a trade for a tractor but must have a front end loader and not too big. The only reason I don’t have one now is because I don’t want to tear up my lawn and I rarely need one. Services: Metal building kit for me to build, or you install a metal building to replace or expand on my existing pole building, or maybe a standalone building for another thing on my project list. Vehicles: Classic car, motor not that important but would prefer not much if any body work. May consider other cars just in case I do sell my truck after the boat. 4 door Jeep Wrangler, SUV, not sure, haven’t really thought about it. Lol Tools: Lincoln or Miller Tig welder, Thermal Dynamics plasma cutter, wood lathe, nice sandblast cabinet, jointer. Recreational: RV, prefer a light weight bumper pull because I may sell my F-350 after the boat and would need to tow with normal SUV. Can Am Maverick or Polaris Razr side by side, 4 door, 1000cc. No motorcycles, my wife would kill me. Will try and put some more pictures of the boat up soon but I just had surgery so it may take a few days for me to climb in for more pics. If someone lives a far distance away I’ll help with delivery for a charge of course, have to put a pen to it but probably $1.00/mile with a deposit of course and if that is the case, I’ll have 5 new tires put on the trailer if it sells for my asking price. Cash, $18,500.00 or trade around $21,500.00. I realize it is not boat selling season so don’t lowball me thinking I need to sell, I have no problem waiting or even parting the boat out to get the most money vs. selling it whole. I certainly will consider any reasonable offers. Thanks!

1992 Bayliner Trophy 2502 with Volvo AQAD41 Diesel Engine and DP290 Duoprop

$18,500

Angleton, Texas

Year 1992

Make Bayliner

Model Trophy

Category -

Length 25.0

Posted Over 1 Month

0 0 1 11 66 Company 1 1 76 14.0 Normal 0 false false false EN-US JA X-NONE 1992 Bayliner Trophy 2502 with Volvo AQAD41 Diesel Engine and DP290 Duoprop Sale or Trade I originally purchased this boat so I could do more spearfishing but decided that after a long day of diving I really did not want to pilot a boat back to shore. I have more money in this boat than I am selling it for but I am not in hurry to sell it nor do I need to. I just hate seeing it sit unused. I no longer spearfish and have not taken the boat out in over a year. This Trophy is a Walkaround with a cabin. A Volvo diesel engine has been installed as an in-board and it also has the Volvo DP 290 outdrive. The tank holds 100 gallons of diesel and is full. The gentleman I purchased the boat from said it gets close to 5mpg. I did not test this as I never took it more than a mile offshore but it does get good mileage putting up and down the Intercoastal. After I purchased the boat I pulled out the old electronics that were in it and installed a Garmin 7212 Chartplotter, Garmin VHF200 radio, Garmin GMR 18 HD radar, Kenwood Apple iPod/Satellite Radio Marine receiver, and Kenwood 61/2” 2-way speakers. If I remember right, all this stuff somewhere between $5000-$5500 when purchased. I never decided which one I wanted so right now the boat does NOT have a transducer. The boat has a metal grate platform on the back that can be used as a swim platform but it holds an SSI 320 quart ice chest which will also come with the boat. The boat has a hard fiberglass top. I also purchased a custom cover for the boat which was $500 or more. It comes with the aluminum tri-axle trailer you see it on. I installed new wiring and LED lights on the trailer and also added side marker lights. The trailer does not have brakes and pulls just fine. As far as the boat: The previous owner installed a Vintage Air AC system but I’ve never used it. The belt is also not hooked up on the compressor. I asked the guy I bought it from if it worked and he said yes but there was a squeak. I looked at the compressor pulley alignment and it needs to be spaced out so that could be the only problem. This boat does have a head and freshwater tanks. I’ve never used them so I could not tell you if it works. Same thing for the livewell. The boat looks pretty good but could definitely use a good buffing in my opinion. There are also some various gel-coat cracks. The seats could use some new cushions and the engine could use a good scrape and repaint, I just have not had time to do it. It comes with an anchor that has been mounted but never used. I have the good service manuals for the diesel engine and the outdrive. The last time I did take out the boat I bent the props. I had a spare set so I cleaned them up, painted them, and put them on so while they look new in the picture, they are not, just painted but in good condition. I still need to tighten them up. I did not have a lock washer so I had to order one so I just loosely put them on. If I don’t get to it, I will give those parts to the buyer should the boat sell. I also have replaced the bellows and the throttle cable. I have Volvo paint and primer for the engine that I will give the buyer. Also have some paint for the outdrive that you can have. The trailer tires hold air and I have not added any in the time I owned it. I replaced one tire on the trailer so there is one tire that is practically new. The other 5 will probably need to be replaced sooner than later and if the boat is to go on a long road trip I would do it before the trip. I think this should cover it for now, lemme know if you have any questions and I’ll try to answer. I have the title for the boat on hand but will have to give a bill of sale for the trailer. The previous owner had the trailer registered as home made, not sure why but I just kept it the same. I may be open to trades but the auction will still need to be completed through Ebay so Ebay can get paid. Boat is also for sale locally so I reserve the right to end the listing early if need be. Trades I would be interested in can be partial plus cash or full trade. I’d value the trade at around $20K. Things that I would be interested in and kind of in order would be: Heavy Equipment: Man lift, preferably towable and articulating with at least 35-40’ height. Need one for my yard so not an indoor unit. Hanging Christmas lights on my extension ladder sucks and I have lots of oaks that need trimming. Might consider a trade for a tractor but must have a front end loader and not too big. The only reason I don’t have one now is because I don’t want to tear up my lawn (7 acres). Services: Metal building to replace or an expansion on my existing pole building or standalone building to turn into ½ mancave bar, ½ mommy workshop. Vehicles: Classic car, motor not that important but would prefer not much if any body work. May consider other cars just in case I do sell truck. Jeep Wrangler, 4 door, SUV, not sure, haven’t really thought about it. Lol Tools: Lincoln or Miller Tig welder, Thermal Dynamics plasma cutter, wood lathe, nice sandblast cabinet, jointer. Recreational: RV, prefer a light weight bumper pull because I may sell my F-350 after the boat and would need to tow with normal SUV. Can Am or Razor side by side, 4 door, 1000cc. No motorcycles, my wife would kill me. Will try and put some more pictures up soon but I just had surgery so it may take a few days for me to climb in for more pics. If someone lives a far distance away I’ll help with delivery for a charge of course, have to put a pen to it but probably $1.00/mile with a deposit of course and if that is the case, I’ll have 5 new tires put on the trailer if it sells for my asking price. Cash, $18,500.00 or trade around $21,500.00. I realize it is not boat selling season so don’t lowball me thinking I need to sell, I have no problem waiting or even parting the boat out to get the most money vs. selling it whole. I certainly will consider any reasonable offers. Thanks!

2014 Epic 22 SC

$36,000

League City, Texas

Year 2014

Make Epic

Model 22 SC

Category Center Consoles

Length 22'

Posted Over 1 Month

2014 Epic 22 SC, Moving up to an offshore boat and can't justify having 2 so I'm parting ways with the bay boat.2014 Epic 22SC Purchased from Ron Hoover in Galveston. Freshly cleaned and ready for the fall flounder run! Lots of accessories to make catching fish and drinking beer as relaxing as possible. We use it as much for cruising around and watching fireworks as we do for fishing. Very family friendly layout without compromising fishability.NADA lists "Low Retail" as $37,150 for a 2013 (2014 wasn't coming up in their database for me) and that pricing does not include the trolling motor (not sure why they don't allow that configuration. . .) Boat is turnkey and rigged with plenty of extras.Stored on trailer in enclosed storage since purchase.Hull:~22.5' in length with an 8.5' beam utilizing all composite construction so no wood to rot.Uses vacuum infused resin to keep hull weight down to ~1,800 lbs. so it's easily trailerable by even some of the smaller unibody SUVs.Huge casting deck and dry ride due to Carolina Flair hull design. I fish 4 people regularly with no issues. 2 Live Wells with ProO2 Oxygen system from BAAD Marine on front well.Powder coated leaning post with 2 flip up jump seats & removable casting chair.Tons of dry storage with lockable rod holder & glove box.Mechanical:200 HP Suzuki 4 Stroke with stainless 3 blade prop mounted on 10" Jack Plate. Plenty of warranty left.Sea Star hydraulic steering with stainless steering wheel.Dual starting batteries with Perko Switch.Performance: 48 - 50 MPH with typical load. I've seen 55 when lightly loaded and water is smooth.Will cruise @ 30 getting ~4 MPG.Drafts 12" -- 14" depending on load.Trailer:EZ Loader aluminum tandem axle aluminum I-Beam trailer. All welded so no bolts to replace on the bunk supports.For some insane reason, the nice aluminum trailer came with drum brakes which promptly rusted out so I upgraded to Kodiak Stainless Steel disc brakes in January 2016. The inspection is current and it has a spare wheel/tire. Additional Accessories/Upgrades:112lb Thrust Minn Kota iPilot trolling motor with 3 Group 31 batteries (installed in January 2016 and used

1983 Wellcraft 19 Starwind by Wellcraft Cruiser

$700

Dawsonville, Georgia

Year 1983

Make Wellcraft

Model 19 Starwind By Wellcraft Cruiser

Category -

Length -

Posted Over 1 Month

the restoration was started but not comlpeted. Boat is 18' 7" LOA with 7' 6" beam. She displaces 1350 lbs. LML 5.12.12 Sailboats Cruiser 3441 PSN . with 395 lbs. trailers available. the boat has most all of its components included. the cabin is filled with parts. ......... 1983 Wellcraft 19 Starwind by Wellcraft Cruiser Parting out Parting out. Many areas have been reworked. ballast and draws 18" board up / 4' 6" board down...

1968 Holiday Houseboat with Trailer

$2,500

Lake Powell, Utah

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

Selling a 1968 Holiday houseboat with fire damage caused by lightning. It has 2 - 318 ci Chrysler engines, 2 - Dana Model 91 Outdrives, 2 - Paragon Hydraulic Transmissions and 40" trailer. This boat was in running condition before the fire. I have more pictures of the interior and exterior. Would like to sell the boat as is but will consider parting out. It is located at Lake Powell.

1998 Seadoo Sportster Jetboat 18 ft Twin Engine needs work

$1,300

Tuckerton, New Jersey

Year 1998

Make Seadoo

Model Sportster

Category Dual Console Boats

Length 18.0

Posted Over 1 Month

fdnyfire Store 1998 Seadoo Sportster Jetboat 18 ft Twin Engine needs work , Hull in great shape, one engine runs fine, other needs rebuild or replace, had water in it from water intrusion , froze up but freed up with oil, might get away with just new top end, interior is really bad see pictures. Signed title for boat, have registration for trailer, but no bill of sale. Would advise seeing before bidding, to make sure its what you want, and not to much work over your head,also mapquest location to make sure its not to far for you to pick up. we know parts are more than what we will sell it for , but were not into parting it out, some one who can fix it , can have an all new boat with putting the work into it.Please zero ratings must be approved first or will be deleted out, we have this for sale locally and can remove early, but prefer auction to go to the end. Call 917 576-8741 for info. or to arrange seeing it first.

63' Custom Fiberglass Trawler Yacht

$65,000

New Bedford, Massachusetts

Year 1985

Make Bayview

Model Custom Trawler Yacht

Category -

Length 63.1

Posted Over 1 Month

This has been my live aboard boat for 10 +- years. When purchased I spent 2 years dry-docked completely doing over bottom stem to stern. Sanding and coating with ma. epoxies- 4 coats. I've had a wonderful time living aboard at its current location and have met people from around the world without the need to leave the dock. Mt rent is 600 per month plus electricity- hasn't been raised once. The slip is available to next owner should they decide to do the same. Price must be negotiated with Marina owner. I recently bought a running takeout Cummins big cam 400 and a 514 twin disc 4.1 to 1 deep case transmission . Both are installed but considerable work is needed to get running. -Exhaust decisions, new electronics, hydraulic setup for steering, capstan for anchor handling and some interior completion. The builder, a marine Surveyor, spent 10 years building this boat. Though documentation expired last year it was listed as 108 net tons. I am reluctantly parting ways with boat due to financial circumstances and age. Had I the means to complete her, this ad would not be here and I would be sipping a Painkiller somewhere in the Islands. This is a once in a lifetime chance for someone to take over where I leave off.There's enough room below to lower in a half dozen Harleys and head for the Islands! There is no reserve, all sales final, was listed last year for 180k then slowly dropped to 125k. No Broker involved, cash sale.I strongly suggest seeing boat before bidding. It is solid as a rock.Contact me and come check it out.This is not a toy boat.with some work it will be a world cruiser.I also have hundreds of pictures I will forward to serious buyers on request.New Bedford has very capable mechanics able to complete project at reasonable cost.They maintain the largest fishing fleet in the world here.think and act quickly for the last boat you'll ever want.approx 900-1000 sf living space onboardWould also make great conversion to swordfish boat etc.You decide.Pilothouse is Aluminum.4 zone forced hot water heating by diesel,2200 gal fuel,, approx 1400 gal waterKing , Queen and twin berths,2 1/2 bathThank you and good luck bidding

yacht 51' bluewater

$89,000

Jeffersonville, Indiana

Year 1985

Make Bluewater

Model Coastal Cruiser

Category Aft Cabin

Length 51.0

Posted Over 1 Month

We are parting with our beautifully maintained and fully operational Bluewater Coastal Cruiser. She is 51’ long with a 13’ 8” beam. The design provides for tremendous space for both inside and outside entertainment. Her twin 454 engines give her a 25 knot top speed with a comfortable 17 knot cruising speed and an easy driving experience. She drafts only 22” dry and is perfect for the ocean, rivers and lakes. With the low center of gravity and comparatively low windage, the rough water capabilities of this Bluewater yacht are renowned. The roomy interior and expansive window area provide an unmatched comfort level - perfect for entertaining or cruising. The shallow draft allows her to enter areas traditional yachts of this size can only dream about. This yacht has all the built-in comforts of home for maximum relaxation and enjoyment. She has 100 amp shore and a 12.5kw Westerbeke generator to provide power flexibility. She has all new 12/3 pre-tinned boat wiring to provide all the A/C electrical needs for an enjoyable and safe cruise during any season. All interior lighting is D/C and, along with the refrigerator, is connected to a 500 watt automatic inverter to provide maximum safety and reliability. She is designed with 3 berths, a full galley and two heads (one with a full size bathtub). The outside deck is very large and excellent for entertaining or just relaxing. Custom built-in seating with under-seat storage units provide comfortable seating for guests on the aft-deck as well around the bridge area. The galley has extensive storage space with built-in wall cabinets as well as two California Closet® pantries with pull-out shelves. In addition to the convection/microwave oven unit, a new 4-burner counter cooktop has been recently installed. The galley also has a white GE full-size refrigerator. The aft-cabin master suite is equipped with a comfortable queen bed with built-in night stand, a custom pull-out shelf, and California Closet® dresser and cabinets. The forward v-berth is very roomy and has 4 large storage compartments. The mid-ship suite has a spacious berth and storage area. The roomy salon has a beautifully upholstered blue rattan sofa and matching chair. The CD player is easily accessible and is connected to a selectable speaker switch for inside, outside or both music listening. Additional features: Dual helmsRemote-controlled motorized aft Davit to accommodate a dinghy or PWCWet-bar on fly-bridge. Two built-in reverse cycle Marine Air/Heat units (16,000BTU each) Two built-in wall-mounted 220v heaters in forward and aft staterooms Raritan toilet in main bath with Coast Guard approved MSD Built-in Washer-d\Dryer combination unit Anchor: The ground tackle is 200’ chain with a plow anchor with a Galley Maid Windlass New flooring installed in the galley and hallway to the rear aft. Bimini cover for bridge Custom swim platform and boarding ladder This boat has been meticulously maintained and upgraded by an experienced owner. She is perfect for live aboard, extended stays, or as a vacation home in exotic locations like the Bahamas. Great yacht for Great Lakes summers/Gulf Coast winters and experiencing the Great Loop Cruise.

Mercruiser 7.4 Complete Bravo 1 Drive w/Prop Transom Mount Inner Plate Ram Pump

$2,600

Miami, Florida

Year -

Make Bravo 1 Complete Assembly

Model -

Category -

Length -

Posted Over 1 Month

Parting out my 95 Baja with a 7.4 Mercruiser....This listing is for the complete Bravo 1 drive with everything you need for a retrofit..The boat had only 160 hours but was left uncovered its whole life so the interior is a disaster and the motor is frozen..I will include everything from the drive with propeller, transom assembly (gimbal housing),Trim Rams, Inner plate, ram hydraulic pump, Power steering actuator and engine coupler..the drive is in great shape but I'm not sure if the hydraulic ram pump is working.. I'm not sure what gear ratio it has but it was mated to a mercruiser 7.4 and the serial number is OF493346. You will also need the engine driven water pump..Any question send me a message and I will respond asap....Shipping is up to you...I can put everything on a pallet, strap it down a wrap it up.You must find a freight service that I can drop it off at in Miami or have them pick it up from me

2004 Seadoo GTX Supercharged Sea Doo

$1,499

Naples, Florida

Year 2004

Make Sea Doo

Model -

Category -

Length -

Posted Over 1 Month

Up for sale is 2004 Seadoo GTX Supercharged. Purchased it as non running, never get anyone to work on it. This jet ski hase been parked for a few years, and battery is not working. Im selling it as is. Trailer is not included in this sale, but if you need one, we can help you with something. Boat has always been garage kept or kept under Seadoo cover when on trips. This would be a very good jet ski for someone with same ski, or handy mechanic. You can pick up for free almost anytime. GIVE ME A CALL AT: + 239 298 0045 We are parting out a lot of Jet Skis. Check out our eBay store, maybe you'll find just what you need! Specifications Length (in / mm): 130.9 / 3324.9 Width (in / mm): 48.2 / 1224.3 Height (in / mm): 44.4 / 1127.8 Dry Weight (lbs / kg): 867 / 393.3 Fuel Capacity (gal / L): 15.9 / 60.2 Load Capacity (lbs / kg): 600 / 272.2 Storage Capacity (gal / L): 52.6 / 231.7 Number of Seats: 3 Engine Displacement (cc): 1494 Engine Type: Longitudinal In-Line Cylinders: 3 Engine Stroke: 4-Stroke Horsepower @ RPM: 185 @ 7500 Maximum Thrust (lbs): N/A Carburetion Type: Fuel Injected Trim System: Not Available Emission Standard: Standard Emissions Powered by eBay Turbo ListerThe free listing tool. List your items fast and easy and manage your active items.